• 시스템엔지니어링학술지
• /
• 제12권2호
• /
• pp.101-114
• /
• 2016

A model-based systems engineering (MBSE) approach to implementing hardware-based network cybersecurity controls for APR1400 non-safety data network is presented in this work. The proposed design was developed by implementing packet filtering and deep packet inspection functions to control the unauthorized traffic and malicious contents. Denial-of-Service (DoS) attack was considered as a potential cybersecurity issue that may threaten the data availability and integrity of DCS gateway servers. Logical design architecture was developed to simulate the behavior of functions flow. HDL-based physical architecture was modelled and simulated using Xilinx ISE software to verify the design functionality. For effective modelling process, enhanced function flow block diagrams (EFFBDs) and schematic design based on FPGA technology were together developed and simulated to verify the performance and functional requirements of network security controls. Both logical and physical design architectures verified that hardware-based cybersecurity controls are capable to maintain the data availability and integrity. Further works focus on implementing the schematic design to an FPGA platform to accomplish the design verification and validation processes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.303-308
• /
• 2006

HyShot 스크램제트 엔진의 연소 특성을 살펴보기 위해 수치해석을 수행하였다. 고도, 받음각, 당량비는 각각 28km, $0^{\circ}$, 0.426으로 주어졌다. $H_2$ 및 OH 질량 분율로부터 분사기 상류 재순환 영역의 화염지지기구 역할 및 주된 연소가 카울로부터 15cm 후방에서 시작됨을 알 수 있었다. 2차원 해석은 HyShot 스크램제트 엔진의 연소기 내부 압력을 비교적 잘 모사하고 있으며, 또한 주기적 연소 특성을 보여준다.

• 한국환경생태학회지
• /
• 제11권2호
• /
• pp.210-213
• /
• 1997

본 연구는 하천환경의 생태적 재생을 목적으로 자연형 저수로 호안공법을 개발하기 위해 수행되었다. 이를 위해 실험하펀으로 선정한 양재천 학여울 구간에 사주부, 수충부, 얕은 만 3가지 유형의 하안경관 특성에 따라 촌 10가지 공법을 개발, 시험 족용하였다. 각 호안공법의 설계에서는 정수식물의 식재에 중점을 두었으며 설계된 공법들은 현장 적용되었고, 적용후 1년간의 경관 형성과정과 식생복원 모니터링을 실시ㅏ였다. 일ㄹ 통해 자연형 저수로 호안공법의 기술적 실행 가능성을 높여, 관행적으로 행해지고 있는 하천공법을 대체할 수 있는 생태적 대안을 제시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.800-807
• /
• 2006

Sea dyke construction is simply defined that the cutting procedure of sea water flow. Sea dyke construction is more difficult than in-land construction because it’s placed on deep seabed and exposed sea wave attack. Especially, the final closure of sea dyke is most dangerous due to the fast velocity of tidal flow. The final closure section is consisted with vast rubble and heavy stone gabion, therefore the discharge velocity at land side of final close section is irregularly and sometime occur the fast discharge velocity. In this study, the seepage model test performed to evaluate seepage behavior with tidal variation of final closure and continuous sea dyke section such as discharge velocity, hydraulic gradient, and phreatic line. Based on the seepage model test results, the maximum discharge velocity of final closure section is 1.7m/sec. Also the local discharge velocity increment and vortex is occurred.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.493-499
• /
• 2004

The dominant effect of the interaction between vortices, generated by the addition of the Leading Edge Extension(LEX) in front of the wing, was well observed in this experiment. In this study, systematic approach by PIV experimental method within a circulating water channel was adopted to study the fundamental characteristics of induced vertex generation, development and its breakdown appearing on a delta wing model with or without LEX in terms of four angles of attack($15^{\circ}$, $20^{\circ}$, $25^{\circ}$, $30^{\circ}$) and six measuring sections(30%, 40%, 50%, 60%, 70%, 80%) of chord length. Distributions of time-averaged velocity vectors and vortices over the delta wing model were compared along the chord length direction. High-speed CCD camera which made it possible to acquire serial images is able to get the detailed information about the flow characteristics occurred on the delta wing. Especially quantitative comparison of the maximum vorticity featuring the induced pressure distribution were also conducted to clarity the significance of the LEX existence.

• 한국전산유체공학회지
• /
• 제12권2호
• /
• pp.37-45
• /
• 2007

The hybrid Cartesian/immersed boundary method is applied to simulate fluid-structure interaction of a two-dimensional orbiting flexible foil. The elastic deformation of the flexible foil is modelled based on the dynamic equation of a thin-plate. At each time step, the locations and velocities of the Lagrangian control points on the flexible foil are used to reconstruct the boundary conditions for the flow solver based on the hybrid staggered/non-staggered grid. To test the developed code, the flow fields around a flapping elliptical wing are calculated. The time history of the vertical force component and the evolution of the vorticity fields are compared with recent other computations and good agreement is achieved. For the orbiting flexible foil, the vorticity fields are compared with those of the case without the deformation. The combined effects of the angle of attack and the orbit on the deformation are investigated. The grid independency study is carried out for the computed time history of the deformation at the tip.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.388-393
• /
• 2001

An experimental study is conducted to investigate the interaction of vortices over a delta wing with leading edge extension(LEX) through the off-surface flow visualization and the 5-hole probe measurements of the wing wake region. Especially, the application of a new visualization technique is employed by ultrasonic humidifier water droplet and laser beam sheet. The results, both the off-surface visualization and the 5-hole probe, show that LEX tends to stabilize the vortices of the delta wing up to the high angle of attack even though the model is yawed. With increasing yaw, the windward leading edge vortex moves inward, and closer to the wing surface, while the leeward vortex moves outwards and away from the wing surface. The vortex interaction is promoted in the windward side, and is delayed in the leeward side.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.91-97
• /
• 2013

In the present study, the effects of contaminant accumulation and surface roughness on the aerodynamic performance of wind turbine blade sections were numerically investigated by using a flow solver based on unstructured meshes. The turbulent flow over the rough surface was modeled by a modified ${\kappa}-{\omega}$ SST turbulence model. The calculations were made for the NREL S809 airfoil with varying contaminant sizes and positions at several angles of attack. It was found that as the contaminant size increases, the degradation of the airfoil performance becomes more significant, and this trend is further amplified near the stall condition. When the contaminant is located at the upper surface near the leading edge, the loss in the aerodynamic performance of the blade section becomes more critical. It was also found that the surface roughness leads to a significant reduction of lift, in addition to increased drag.

• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.1-10
• /
• 2006

비정상 공기역학적 해석코드와 동역학적 해석 프로그램이 연계된 코드를 이용하여 단분리 시스템의 유동해석과 함께 분리과정의 거동을 해석하였다. 본 연구는 일단 추진 모터를 가진 장거리 미사일 단분리과정 만을 연구대상으로 하였다. 연구의 목적은 이러한 단분리 시스템의 안전성과 신뢰도를 검증하기 위해 단분리 과정에 대한 비정상 동역학 시뮬레이션을 수행하였다. 특히 비행 중 받음각 요란에 의한 자유흐름 조건의 변화에 대해서도 시뮬레이션을 수행하여, 받음각 요란이 단분리의 안정성과 신뢰도에 미치는 영향을 알아보고자 하였다. 해석코드는 병렬화 된 중첩 정열격자계를 사용하여 비정상 초음속 오일러 코드로 공기역학적 해석을 한 후, 이 결과를 6자유도를 갖는 운동방정식의 입력 데이터로 하여 동역학적 시물레이션을 수행하였다.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.39-45
• /
• 2012

Underwater robots are generally used for the construction of seabed structures, deep-sea ecosystem research, ocean energy development, etc. A ducted marine propulsor is widely used for the thruster of an underwater robot because of its collision protection, efficiency increase, cavitation reduction, etc. However, the flow of a ducted propeller is very complex because it involves strong flow interactions between the blade impeller and duct. The present work aimed to design a ducted propeller using 2-D strip theory and CFD analysis. The hydrodynamic forces (i.e. and ) were computed to set the local angle of attack in a spanwise direction of the propeller blade. After the propeller design, performance coefficients such as the thrust, torque, and efficiency were computed to check whether the designed performance was achieved. To validate the present analysis, the thrust was compared with experimental data and good agreement was obtained.