• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.306-306
• /
• 2010

A high density (> $10^{11}\;cm^{-3}$) and low electron temperature (< 2 eV) plasma is produced by using a conventional HF (13.56 MHz) plasma enhanced chemical vapor deposition (PECVD) with an additional ultra high frequency (UHF, 314 MHz) plasma source utilizing two parallel antenna assembly. It is applied for the high rate synthesis of high quality nanocrystalline silicon (nc-Si) films. A high deposition rate of 1.8 nm/s is achieved with a high crystallinity (< 70%), a low spin density (< $3{\times}10^{16}\;cm^{-3}$) and a high light soaking stability (< 1.5). Optical emission spectroscopy measurements reveal emission intensity of $Si^*$ and $SiH^*$, intensity ratio of $H{\alpha}/Si^*$ and $H{\alpha}/SiH^*$ which are closely related to film deposition rate and film crystallinity, respectively. A high flux of precursor and atomic hydrogen which are produced by an additional high excitation frequency is effective for the fast deposition of highly crystallized nc-Si films without additional defects.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.278-278
• /
• 2012

최근 폴리이미드(Polyimide) 고분자 물질을 기판으로 하는 플렉시블 전자소자 구현에 관한 연구가 활발히 진행 되고 있다. 폴리이미드는 수분 흡수율이 1% 이하인 소수성 물질로서 폴리이미드 기판 위 전극 형성에 있어 전극 물질이 분리되는 현상이 발생하게 된다. 따라서 본 연구에서는 소수성의 표면 성질을 갖는 폴리이미드 기판의 Asher 처리를 통한 표면 최적화에 대한 실험을 진행하였다. 유리기판 위에 액상 폴리이미드를 ${\sim}10{\mu}m$ 두께로 Spin coating 한 후 $120^{\circ}C$ hot plate에서의 soft bake와 $200^{\circ}C$, $320^{\circ}C$의 furnace에서의 단계적 cure 과정을 통해 표면의 defect을 최소화하였다. Microwave Asher 장비를 이용하여 폴리이미드 막에 10초, 15초, 20초 동안 asher 처리를 한 후 Atomic Force Microscopy (AFM) 장비로 시간에 따른 폴리이미드 기판 표면의 변화를 확인하였다. AFM 확인 결과 10 초의 공정 조건에서 가장 우수한 표면 morphology를 보였으며, 이는 표면의 탄소와 이물질을 제거하기 위해 사용되는 asher 처리 시간이 상대적으로 증가함에 따라 폴리이미드 막의 탄소 성분이 제거 되면서 표면의 형상이 최적화 이상으로 변화하기 때문이다. 본 실험은 폴리이미드를 기반으로 하는 플렉시블 전자소자 구현에 있어 전극 및 소자 제작에 크게 기여할 것으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.273-273
• /
• 2012

최근 스마트 윈도우, 자가세정(Self-Cleaning), 김서림방지(Anti-Fogging), 디스플레이 표시장치, 대전방지 코팅 등 다각적으로 활용이 가능한 PTFE (Ploytetrafluoroethylene)를 Sol-gel, Sputtering, Spin-Coating, CVD (Chemical vapor deposition)방법을 이용하여 낮은 표면에너지와 나노사이즈의 표면 거칠기를 가지는 $150^{\circ}$ 이상의 초-발수성 표면에 대한 많은 연구가 진행되고 있다. 본 실험에서는 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대 면적 공정이 가능한 RF-magnetron sputtering방법을 이용하여 Plasma etching으로 표면적의 거칠기와 낮은 표면에너지를 만든 뒤, 발수특성을 가진 PTFE를 증착하여 접촉각 변화와 구조적 및 광학적 특성을 측정하였다. AFM (Atomic Force Microscope)측정결과 100 w에서 가장 높은 1.7 nm의 RMS(Root mean square)값이 측정되었고, 접촉각 측정결과 Plasma etched glass는 25 w에서 125 w로 증가함에 따라 친수성을 나타내었으며, 100 w에서 가장 낮은 $15^{\circ}$의 접촉각을 나타내었다. PTFE박막을 증착하였을 때는 100 w에서 $150^{\circ}$의 초발수 특성을 나타내었고, 투과율 측정 결과 85%이상의 높은 투과율을 나타내었다. Plasma etching을 이용한 PTFE 발수 특성은 비가 오면 자동으로 이물질이 씻겨 내리는 자동차 유리등의 개발이 가능하고, 높은 투과율이 요구되는 액정표시장치(LCD)같은 차세대 대형 디스플레이의 표면 코팅에 사용이 가능 할 것이라 사료된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.

• Journal of Magnetics
• /
• v.9 no.4
• /
• pp.125-127
• /
• 2004

We have grown Mn-doped $Bi_2Se_3$ and $Sb_2Se_3$ single crystals using the temperature gradient solidification method. We report on the structural and magnetic propertis of Mn-doped $Bi_2Se_3$ and $Sb_2Se_3$ compound semi-conductors. The lattice constants of several percent Mn-doped $Bi_2Se_3$ and $Sb_2Se_3$ were slightly smaller than those of the un-doped samples due to the smaller Mn atomic radius ($1.40 {\AA}$) than those of Bi ($1.60 {\AA}$) and Sb ($1.45 {\AA}$). Mn-doped $Bi_2Se_3$ and $Sb_2Se_3$ showed spin glass and paramagnetic properties, respectively.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.05a
• /
• pp.15-16
• /
• 2013

Magnetization behavior of ultra thin $Fe_xCo_{1-x}$ alloy (where x varies from 0 to 100) has been investigated as functions of composition on Cr (100) substrate by using in situ surface magneto optical Kerr effect (SMOKE). It's always show in plane uniaxial magnetic anisotropy at room temperature (RT) & Low temperature (LT). It is observed that composition dependent coercive force maximum at about 30 at % Co and 70 at % Co atomic ratio and minimum near equiatomic site. The relative magnetic moments as composition variation also show magnetization collapse near equiatomic site. The magnetization behaviors of Fe-Co alloy on Cr (100) due to composition varies are supported the order-disordering as well as structural stability bcc (ferromagnetic)/fcc (anti-ferromagnetic) phase stability magnetism.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.7-7
• /
• 2003

Heteromagnetic nanostructures, which consist of two or more different layers such as nonmagnet, insulator, ferromagnet, antiferromagnet, and superconductor, have been widely used in current and likely future spintronics devices. Their many intriguing magnetic properties are originated from a variety of magnetic interactions at relevant length scales at or near interfaces and between different constituent layers as well as laterally different regions in chemical and magnetic heterogeneity. The fundamental properties can thus differ along depth and laterally in the film plane, depending on their relevant coupling length scales. The entire properties may be characterized by interface properties and/or the depth-varying properties of the individual constituent layers, and lateral inhomogeneity as well. It is a challenge to investigate both depth-varying properties and lateral heterogeneity in such heteromagnetic nanostructures. In this talk, soft x-ray magneto-optical effect as a nanometer scale probe of a variety of heteromagnetic structures is presented and its related noble techniques are introduced. For instances, magnetization vector imaging to investigate vector spin configurations in the film plane is presented, as well as the Kerr rotation, ellipticity, and intensity measurements as a depth sensitive probe on the atomic scales.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.821-825
• /
• 2013

Effect of multi-stacked layer (MSL), 0.1 mol (M) and 0.3 mol (M) hafnium oxide ($HfO_2$) alignment layers were fabricated via a solution-process for LCs orientation. The solutions were spin-coated and annealed in a furnace. MSL consists of three sub-layers using 0.1 M solution, mono-layer (ML) is composed of 0.3 M $HfO_2$ solution. Then ion-beam irradiation was treated with 1.8 keV for 2 min. $HfO_2$-based LC cells were investigated through photographs, pre-tilt angle using crystal rotation method, X-ray photoelectron spectroscopy (XPS) measurement, and surface roughness using atomic force microscopy(AFM) for their characteristic research. Good LC orientation characteristics were observed on MSL $HfO_2$ surface. The LC alignment mechanism on MSL $HfO_2$ and ML $HfO_2$ surfaces was attributed to van der Waals (VDW) interaction between the LC molecular and substrate surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.484-490
• /
• 2017

We investigated the rewritable operation of a non-volatile memory device composed of Al (top)/$TiO_2$/indium-zinc-oxide (IZO)/Al (bottom). The oxygen-deficient IZO layer of the device was spin-coated with 0.1 M indium nitrate hydrate and 0.1 M zinc acetate dehydrate as precursor solutions, and the $TiO_2$ layer was fabricated by atomic layer deposition. The oxygen vacancies IZO layer of an active component annealed at $400^{\circ}C$ using thermal annealing and it was proven to be in oxygen vacancies and oxygen binding environments with OH species and heavy metal ions investigated by X-ray photoelectron spectroscopy. The device, which operates at low voltages (less than 3.5 V), exhibits non-volatile memory behavior consistent with resistive-switching properties and an ON/OFF ratio of approximately $3.6{\times}10^3$ at 2.5 V.

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.2
• /
• pp.84-88
• /
• 2002

Dating and dosimetry using electron spin resonance (ESR) in 20th Century developed at both Yamaguchi University and Osaka University have been reviewed with emphasis on new prospects and strategies in 21th century. Natural radiation have been generating radicals that accumulated in archaeological and geological materials. ESR detects these radicals and the ESR signal intensity is proportional to the radiation dose and therefore the age. The assessment of the total dose of natural radiation and the annual dose rate give their ESR ages. The ESR dating of stalactites and stalagmites ant Akiyoshi cave in Yamaguchi prefecture in 1975 was extended to anthropological dating using bones and tooth enamel excavated in Greek Petralona cave. Fossils of shells and corals gave the ages of marine terraces and sea-level changes. Quartz grains gave the ages of geothermal alteration and fault movements. Future ESR dating of ices at outer planets anf their satellite are also investigated as basic studies for ices od $H_2O,\;CO_2,\;SO_2$ as well as terrestrial hydrates in laboratory. Atomic bomb radiation dosimetry at Hiroshima and Nagasaki using ESR lead to the dosimetry of personnel, Chemobyl and JCO criticality accidents. Monitoring of radiation dose with sensitive materials with tissue equivalence are being developed. finally a new scanning ESR imaging apparatus (a near field microwave microscope) developed in our laboratory gave ESR images of Radicals from fossils to Si-CVD and diamond films as summarized in my book in 2002.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.369-369
• /
• 2007

ZnO film has been investigated during several decades because it has excellent optical property like a transmittance among the range of visible light for using transparent conducting oxide (TCO) films. But ZnO film has not enough conductivity for applying to TCO devices. Therefore we synthesized platinum nanoparticles and they incorporated into ZnO due to improve the electrical property of ZnO film by sol-gel synthesis method. Also, we fabricated photosensitive ZnO thin film containing Pt nanoparticles by sol-gel process and spin-coating for using photochemical solution deposition. Photosensitive ZnO film could carry out the direct-pattern which allow the etching process to be convenient. The optical and electrical properties of ZnO film with or without various atomic percent of Pt nanoparticles annealed at various temperatures were investigated by using UV-Vis spectroscopy and 4-point probe method, respectively. We characterized the ZnO thin film containing Pt nanoparticles using X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy.