• Journal of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.148-151
• /
• 1965

Kinetics of reactions of chloride and bromide ions with benzyl chloride and bromide have been investigated in 90% ethanol solution. Semi-quantitative analysis of the results shows that the bond-formation is more important than the bond-breaking and furthermore in bond-formation the energy gain due to bond-formation is less than the increase in electron affinity of the nucleophile.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.173-182
• /
• 2018

As part of planning for waste minimization, decontamination foam has been considered as a potential application for the cleaning of radioactive contaminant. In this study, we synthesized silica particles to improve foam stability by varying synthesis parameters. Cetyltrimethylammonium bromide (CTAB) was found to influence the stability of the decontamination foam. The reason was that higher interaction between $SiO_2$ nanoparticles and surfactant at the air-water interface in aqueous solution is beneficial for foam stability. CTAB can also be used as an additive for the aggregation of silica nanoparticles. In the separation of $SiO_2$ nanoparticles, CTAB plays a critical role in the nanoparticles flocculation because of the charge neutralization and hydrophobic effects of its hydrocarbon tails.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.99-104
• /
• 1999

A stepwise gradient elution with two wavelengths detection was performed for the separation and determination of some anions in saline water. The eight anions such as iodate, bromate, nitrite, bromide, nitrate, chromate, iodide and thiocyanate were successfully separated using AS-7 column and sodium chloride/sodium phosphate buffer solution as an eluant within 40 min. The separation behaviors of anions were studied at various sodium chloride concentrations. The peak shapes of anions of bromate, nitrite, bromide and nitrate gradually broadened as the concentration of sodium chloride increased until 1.0 M in the sample solutions. However, no effect was observed in the peak shapes of chromate, iodide and thiocynate. A good linearity was obtained at the range of ppm(mg/L). The detection limit was proved to be $10-720{\mu}g/L$ for the eight anions with $50{\mu}L$ injection volume. This method was applied to the determination of $Br^-$, ${NO_3}^-$ and $I^-$ in sea water.

• Advances in environmental research
• /
• v.1 no.3
• /
• pp.181-189
• /
• 2012

Trihalomethanes, produced as a result of chlorination of drinking water, are considered a potential health hazard. The trihalomethane formation potential (THMFP) of a raw water source may indicate the maximum trihalomethanes (THMs) that are likely to be produced when chlorine reacts with natural organic matter (NOM) present in the water. A study was conducted to evaluate the THMFP in seven different drinking water sources in the vicinity of Kalpakkam, a rural township, on the east coast of India. Water from seven stations were analysed for THMFP. THMFP was compared with surrogate parameters such as dissolved organic carbon (DOC), ultraviolet absorbance ($UV_{254}$) and bromide. The data showed that THMFP was high in water from open wells as compared to closed bore wells, possibly due to more photosynthetic activity. Proximity to sea, and consequently the levels of bromide, was an important factor that influenced THM formation. THM surrogate parameters showed good correlation with THMFP.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2017

In this study, desorption characteristics of Cs from clay according to the hydrophobic alkyl chain length of the cationic surfactant were investigated. Alkyltrimethylammonium bromide was used as a cationic surfactant, and the length of the hydrophobic alkyl chain of the cationic surfactant was varied from -octyl to -cetyl. The adsorbed amount of the cationic surfactant on montmorillonite increased with the length of the hydrophobic alkyl chain, and intercalation of the cationic surfactant into the clay interlayer increased the interlayer distances. The Cs removal efficiency was also enhanced with increasing alkyl chain length, and the cationic surfactant with the cetyl group showed a maximum Cs removal efficiency of $992{\pm}2.9%$.

• Nuclear Engineering and Technology
• /
• v.5 no.2
• /
• pp.83-86
• /
• 1973

The protective effects of acetylbenzoylaconine, 2-aminoethylisothiouronium bromide hydrobromide, $\beta$-mercaptoethylamine HCI, and L-thiazolidine-4-carboxylic acid were studied on the white male mice, aged 5-6 weeks. The toxicity test of acetylbenzoylaconine revealed that the LD$_{50}$ was 2.5 mg/kg of body weight. After the administration of test substances, mice were irradiated with whole body dose of 800 rad by the Co-60 source. Observing the number of surviving mice for 30 days, the survival coefficients for the test groups were calculated and with these the protective coefficients against radiation injury, PCR, were also calculated. The PCR values are 2.24, 2.95, 2.78, and 1.23 for acetylbenzoylaconine, 2-aminoethylisothiouronium bromide hydrobromiide, $\beta$-mercaptoethylamine HCI, and L-thiazolidine-4-carboxylic acid respectively. These values reveal that the acetylbenzoylaconine has protective potency against radiation injury on white male mice.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.783-790
• /
• 2003

Tetranychus urticae Koch and Panonychus ulmi Koch were identified as quarantine pests in apple samples and were controlled soon after the commercial treatment of methyl bromide (MeBr) and with irradiation doses $(0.5{\sim}3kGy)$ after irradiation. The physical qualities of apples, such as rotting, withering, weight changes, hardness, and color, were apparently affected by MeBr. Furthermore, more than 2 kGy irradiation resulted from the lapse of storage time. Associated with the physical qualities of stored apples, irradiation and fumigation for quarantine purposes were more adequate after 40 days of storage at $0{\pm}1^{\circ}C\;(85{\pm}2%\;RH)$ immediately following harvest, rather than soon after harvest. Less than 1 kGy irradiation, based on its accumulated control effect on pests, can potentially be applied as a quarantine procedure without causing significant changes in the physical qualities of fresh apples, in contrast to MeBr.

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.184-189
• /
• 2001

Comparative effects of gamma irradiation and methyl bromide (MeBr) fumigation on water-soluble components of small red bean and mung bean were investigated. The levels of soluble solid and reducing sugar of soaked water at $20^{\circ}C$ for 16 h definitely increased as irradiation dose increased, which was more apparent in small red bean than in mung bean. But, their levels of MeBr-fumigated sample showed a similar result to those of the control, except for soluble solid of small red bean. The pH of soaked water was insignificantly different among treatments. The decrease in lightness (L value) and the increases of redness (a value) and yellowness (b value) were remarkable as irradiation dose increased, which was more significant in fumigated samples. The ${\Delta}E$ values of fumigated sample showed almost equaled to those of 10 kGy in red bean and 30 kGy in mung bean, respectively. Gamma irradiation caused the increase in free amino acids of soaked water, that mainly consisted of asparagine, glutamic acid, and valine, while fumigation reduced their contents. The extractables in soaked water, such as soluble solid and reducing sugar, showed a highly positive correlation with irradiation dose applied.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4652-4659
• /
• 2022

Among the detector materials available at room temperature, thallium bromide (TlBr), which has a relatively high atomic number and density, is widely used for gamma camera imaging. This study aimed to verify the usefulness of TlBr through quantitative evaluation by modeling detectors of various compound types using Monte Carlo simulations. The Geant4 application for tomographic emission was used for simulation, and detectors based on cadmium zinc telluride and cadmium telluride materials were selected as a comparison group. A pixel-matched parallel-hole collimator with proven excellent performance was modeled, and phantoms used for quality control in nuclear medicine were used. The signal-to-noise ratio (SNR), contrast to noise ratio (CNR), sensitivity, and full width at half maximum (FWHM) were used for quantitative analysis to evaluate the image quality. The SNR, CNR, sensitivity, and FWHM for the TlBr detector material were approximately 1.05, 1.04, 1.41, and 1.02 times, respectively, higher than those of the other detector materials. The SNR, CNR and sensitivity increased with increasing detector thickness, but the spatial resolution in terms of FWHM decreased. Thus, we demonstrated the feasibility and possibility of using the TlBr detector material in comparison with commercial detector materials.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.189-194
• /
• 2002

Two-photon resonant third photon ionization of atomic bromine $(4p^5\;^2P_{3/2}\;and\;^2P_{1/2})$ has been studied using a photoelectron imaging spectroscopy in the wavelength region 250 - 278 nm. The technique has yielded simultaneously both relative branching ratios to the three levels of $Br^+(^3P_2,\;^3P_{0.1}\;and^1D_2)$ with $4p^4$ configuration and the angular distributions of outgoing photoelectrons. The product branching ratios reveal a strong propensity to populate particular levels in many cases. Several pathways have been documented for selective formation of $Br^+(^3P_2)$ and $Br^+(^3P_{0.1})$ ions. In general, the final ion level distributions are dominated by the preservation of the ion core configuration of a resonant excited state. Some deviations from this simple picture are discussed in terms of the configuration interaction of resonant states and the autoionization in the continuum. The photoelectron angular distributions are qualitatively similar for all transitions, with a positive $A_2$ anisotropy coefficient of 1.0-2.0 and negligible $A_4$ in most cases, which suggests that the angular distribution is mainly determined by the single-photon ionization process of a resonant excited state induced from the third photon absorption.