• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.989-992
• /
• 2004

PEMBE(plasma enhanced molecular beam epitaxy)방법으로 성장된 GaN 박막의 초기 거동현상을 실시간 X-선 산란을 이용하여 관찰하였다. 표면이 원자 계단(atomic step)을 이루고 있는 사파이어 기판 위에 성장하는 GaN 박막은 layer-by-layer 모드로 성장 후 3D 모드로 성장을 하였다. 거친 표면을 가진 사파이어 기판 위에 성장하는 GaN 박막은 성장 초기는 표면을 평평하게 만든 후, 3D 모드로 성장하였다. 플라즈마로 생성된 이온화된 질소는 표면의 에너지를 변화시켜 GaN 박막의 증착을 증진시키고, 표면의 coverage를 증가시킨다.

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.51-58
• /
• 1998

ZnS and TB-doped ZnS (ZnS:Tb) thin films were grown by traveling wave reactor atomic layer epitaxy (AKE) and characterized using materials and surface analysis techniques. $ZnCl_2$, $H_2$S,and tris(2,26,6-tetramethyl-3,5-heptandionato) terbium ($Tb(TMHD)_3$) were used as the precursors in the growth of ZnS:Tb films. The dependence of Cl content in ZnS films on growth temperature was investigated using Rutherford backscattering spectrometry. The Cl content decreased from approximately 9 at.% to 1 at. % as increasing the growth temperature from 400 to $500^{\circ}C$. The segregation of Cl in near surface region was also observed by depth profiling using Auger electron spectroscopy. Scanning electron microscopic studies showed that the ALE-grown ZnS and ZnS:Tb film during ALE process using $Tb(TMHD)_3$was also investigated. Approximately 1 at.% of O in ZnS:Tb(0.5 at.%) film which showed a good crystallinity of hexagonal 2H structure.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.05a
• /
• pp.128-128
• /
• 1998

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.245-249
• /
• 2015

Vertically coupled low density InGaAs quantum dots (QDs) buried in GaAs matrix were grown with migration enhanced molecular beam epitaxy method as a candidate for quantum information processing devices. We performed excitation power-dependent photoluminescence measurements at cryogenic temperature to analyze the effects of vertical coupling according to the variation in thickness of spacer layer. The more intense coupling effects were observed with the thinner spacer layer, which modified emission properties of QDs significantly. The low surface density of QDs was observed by atomic force microscopy, and scanning transmission electron microscopy verified the successful vertical coupling between low density QDs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.1-6
• /
• 2020

In this research, 50 nm thick AlN thin films were deposited on the patterned sapphire (0001) substrate by using HVPE (Hydride Vapor Phase Epitaxy) system and then epitaxial layer structure was grown by MOCVD (metal organic chemical vapor deposition). The surface morphology of the AlN buffer layer film was observed by SEM (scanning electron microscopy) and AFM (atomic force microscope), and then the crystal structure of GaN films of the epitaxial layer structure was investigated by HR-XRC (high resolution X-ray rocking curve). The XRD peak intensity of GaN thin film of epitaxial layer structure deposited on AlN buffer layer film and sapphire substrate was rather higher in case of that on PSS than normal sapphire substrate. In AFM surface image, the epitaxial layer structure formed on AlN buffer layer showed rather low pit density and less defect density. In the optical output power, the epitaxial layer structure formed on AlN buffer layer showed very high intensity compared to that of the epitaxial layer structure without AlN thin film.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.43-49
• /
• 2000

The TiN thin films were deposited by ALE(atomic layer epitaxy) on (100) silicon substrate. The TiN thin films were characterized by means of XRD, 4-point probe, AFM, AES and SEM. TEMAT(terakis(ethyl methy lamino)titanium) and $NH_3$ were injected into the reactor in sequence of TEMAT-$N_2-NH_3-N_2$ to ensure a saturated surface reaction. As a result, the depostion rate of the TiN film was controlled by self-limiting growth mechanism at temperature range form 150 to 220 $^{\circ}C$. Deposited TiN films, all of which show amorphous structure, had a fixed deposition rate of 4.5 ${\AA}$/cycle. The resistivity of 210 ~ 230 ${\mu}{\Omega}{\cdot}$cm and the surface r.m.s. roughness of 7.9 ~ 9.3 ${\AA}$ were measured. When TiN film of 2000 ${\AA}$ were deposited, a excellent step coverage were observed in a trench structure of 0.43${\mu}m$ contacts with 6:1 aspect ratio.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.130-134
• /
• 2006

Buffer layers such as $CeO_2\;and\;Yb_2O_3$ films for YBCO coated conductors were deposited on (100) $SrTiO_3$ single crystals and (100) textured Ni substrates by a metal organic chemical vapor deposition (MOCVD) system of the hot-wall type. The substrates were moved with the velocity of 40 cm/hr. Source flow rate, $Ar/O_2$ flow rate and deposition temperature were main processing variables. The degree of film epitaxy and surface morphology were investigated using XRD and SEM, respectively. On a STO substrate, the $CeO_2$ film was well grown epitaxially above the deposition temperature of $450^{\circ}C$. However, on a Ni substrate, the XRD showed NiO (111) and (200) peaks due to Ni oxidation as well as (111) and (200) film growth. For the films deposited with $O_2$ gas as oxygen source, it was found that the NiO film was formed at the interface between the buffer layer and the Ni substrate. The NiO layer interrupts the epitaxial growth of the buffer layer. It seems that the epitaxial growth of the buffer layer on Ni metal substrates using $O_2$ gas is difficult. We are considering a new method avoiding Ni oxidation with $H_2O$ vapor instead of $O_2$ gas.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.08a
• /
• pp.264-264
• /
• 2007

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.325-325
• /
• 2005

• 한국전자현미경학회:학술대회논문집
• /
• 2004.11a
• /
• pp.54-60
• /
• 2004