• 한국대기환경학회지
• /
• 제31권5호
• /
• pp.449-460
• /
• 2015

Carbonaceous aerosol is generally classified into OC (organic carbon) and EC (elemental carbon) by thermal optical analysis. Both NIOSH (National institute of occupational safety and health) with high temperature (HighT) and IMPROVE-A (Interagency monitoring of protected visual environments) with low temperature (LowT) protocols are widely used. In this study, both protocols were applied for ambient $PM_{2.5}$ samples (Daejeon, Korea) in order to underpin differences in OC and EC measurements. An excellent agreement between NIOSH and IMPROVE-A protocol was observed for TC (total carbon). However, significant differences between OC and EC appeared and the differences were larger for EC than OC. The main differences between two protocols are temperature profile and charring correction method. For the same charring correction method, HighT_OC was 10% higher than LowT_ OC, while HighT_EC was 15% and 33% lower than LowT_EC for TOT (thermal-optical transmittance) and TOR (thermal-optical reflectance), respectively. This difference may be caused by the temperature of OC4 in He step and possibly difference in POC (pryorilized OC) formation. For the same temperature profile, OC by TOT was about 26% higher than that by TOR. In contrast, EC by TOT was about 50% lower than that by TOR. POC was also dependent on both temperature profile and the charring correction method, showing much distinctive differences for the charring correction method (i.e., POC by TOT to POC by TOR ratio is about 2). This difference might be caused by different characteristics between transmittance and reflectance for monitoring POC formation within filters. Results from this study showed that OC and EC depends on applied analysis protocol as shown other studies. Because of the nature of the thermal optical analysis, it may not be possible to have an absolute standard analysis protocol that is applicable for any ambient $PM_{2.5}$. Nevertheless, in order to provide consistent measurement results for scientists and policy makers, future studies should focus on developing a harmonized standard analysis protocol that is suitable for a specific air domain and minimizes variations in OC and EC measurement results. In addition, future elaborate studies are required to find and understand the causes of the differences.

• 한국입자에어로졸학회지
• /
• 제17권4호
• /
• pp.125-132
• /
• 2021

Fresh PM_2.5 smokes emitted from combustion of four biomass materials (pellet, palm fruit fiber (PFF), PKS, and sawdust) in a laboratory-controlled environment were characterized using an attenuated total reflectance-fourier transform infrared (ATR-FTIR) technique. In smoke samples emitted from combustion of pellets, PFF and PKS, which is being used as boiler fuels for greenhouses in rural areas, the organic carbon/elemental carbon (OC/EC) ratios in PM_2.5 were very high (14.0-35.5), whereas in sawdust smoke samples they were significantly low (<4.0) due to the combustion method close to flaming combustion. ATR-FTIR analysis showed that OH(3400-3250 cm^-1), CH₃(2958-2840 cm^-1), CH₂(2910 cm^-1 and 2850 cm^-1), ketone(1726-1697 cm^-1), C=C(1607-1606 cm^-1 and 1515-1514 cm^-1), lignin (1463-1462 cm^-1 and 1430-1428 cm^-1) and -NO₂(1360-1370 cm^-1) peaks were identified in all biomass burning (BB) smoke samples. However, additional peaks appeared depending on the type of biomass. Among the four types of biomass materials, an additional peak of the methylene group CH₃(2872-2870 cm^-1) appeared only in PFF and PKS smoke samples, and a peak of C=O(1685 cm^-1) was also confirmed. And in the case of PKS smoke samples, a peak of aromatic C=C(1593 cm^-1 and 1476 cm^-1) that did not appear in other BB samples was also observed. This indicates that the molecular structure of organic compounds emitted during BB differs depending on the type of biomass materials. The results of this study are expected to provide valuable information to more specifically reveal the effect of BB on PM_2.5 collected in the atmospheric environment.

• 한국대기환경학회지
• /
• 제32권1호
• /
• pp.100-113
• /
• 2016

In this study, the characteristics of $PM_{2.5}$ and $PM_{2.5-10}$ concentrations were identified in two different functional areas including Chuncheon and Youngwol, Korea. Even though the anthropogenic emission rates of $PM_{2.5}$ and $PM_{10}$ are approximately four times higher in Youngwol than in Chuncheon their atmospheric concentrations were statistically higher in Chuncheon. In Chuncheon, both $PM_{2.5}$ concentrations and the ratio of $PM_{2.5}/PM_{10}$ increased as relative humidity (RH) increased possibly because the inorganic and/or organic secondary aerosols were actively formed at high RH. This result was also supported by that $PM_{2.5}$ concentration was enhanced under the fog and mist conditions in Chuncheon. On the other hand, both $PM_{2.5}$ and $PM_{2.5-10}$ concentrations clearly increased with the southerly winds blown from the cement production facility in Youngwol. In addition, high $PM_{2.5-10}$ concentrations were observed with high wind speed, low relative humidity, and high $NO_2$ concentrations in Youngwol, suggesting that $PM_{2.5-10}$ was generated through the physical process including crushing and packing procedures followed by resuspension from cement and lime factory.

• 대기
• /
• 제28권2호
• /
• pp.211-222
• /
• 2018

Cloud droplet activation process is well described by $K{\ddot{o}}hler$ theory and several parameterizations based on $K{\ddot{o}}hler$ theory are used in a wide range of models to represent this process. Here, we test the two different method of calculating the solute effect in the $K{\ddot{o}}hler$ equation, i.e., osmotic coefficient method (OSM) and ${\kappa}-K{\ddot{o}}hler$ method (KK). To do that, each method is implemented in the cloud droplet activation parameterization module of WRF-CHEM (Weather Research and Forecasting model coupled with Chemistry) model. It is assumed that aerosols are composed of five major components (i.e., sulfate, organic matter, black carbon, mineral dust, and sea salt). Both methods calculate similar representative hygroscopicity parameter values of 0.2~0.3 over the land, and 0.6~0.7 over the ocean, which are close to estimated values in previous studies. Simulated precipitation, and meteorological variables (i.e., specific heat and temperature) show good agreement with reanalysis. Spatial patterns of precipitation and liquid water path from model results and satellite data show similarity in general, but on regional scale spatial patterns and intensity show some discrepancy. However, meteorological variables, precipitation, and liquid water path do not show significant differences between OSM and KK simulations. So we suggest that the relatively simple KK method can be a good alternative to the OSM method that requires various information of density, molecular weight and dissociation number of each individual species in calculating the solute effect.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.277-289
• /
• 2019

Herein, a case study discussing the effect of carbonaceous aerosol pollution, which is emitted during the charcoal kiln manufacturing processes or carbonization processes, on the atmospheric environment is presented . In South Korea, in situ analysis of different charcoal production plants specialized in the production of charcoal sauna indicate that the emitted organic carbon (OC) and elemental carbon (EC) aerosols are significantly influenced by the nature of the biomass and technological processes, i.e., treatment or emissions abatement systems for the exhaust effluent gases. In detail, total carbon (TC), which is calculated as the sum of OC and EC emission factors, varied widely from a charcoal production site to another ranging from 21.8 to 35.8 gTC/kg-oak, where the mean value for the considered production sites was approximately 28 gTC/kg-oak (N = 7 and sum = 196.4). Results indicate that the emission factors from a modern charcoal production process in South Korea are quantitatively lower in comparison with the traditional kiln. This study aims to propose advanced wood processes for the production of charcoal from the viewpoint of environmental protection policy and green engineering.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.20-26
• /
• 2010

수용성 유기 및 무기성분은 대기 에어로졸 입자의 중요한 구성성분들이며 간접적으로 기후에 영향을 미치는 구름응결핵으로 작용한다. 유기 및 원소탄소(organic and elemental carbon, OC 및 EC) 및 수용성 유기탄소(water soluble OC, WSOC) 및 이온성분농도를 조사하기 위하여 광주지역에서 24시간 기준의 미세입자($PM_{2.5}$)를 측정하였다. 측정기간 중 $PM_{2.5}$ 수용성 분율의 주요성분인 WSOC, $NO_3^-$, $SO_4^{2-}$ 및 $NH_4^+$의 평균농도는 각각 2.11, 5.73, 3.51 및 $3.31{\mu}g/m^3$ 이었으며, $PM_{2.5}$ 농도의 12.0(2.9~23.9%), 21.0(12.9~37.6%), 11.6(2.5~25.9%), 및 11.7%(3.8~18.6%)를 차지하였다. 총 수용성 성분(유기+무기) 중 WSOC 화합물이 차지하는 분율은 평균 17.6%(5.4~35.9%)이었다. EC 추적자 기법을 이용해 평가한 2차 OC 및 WSOC 농도는 각각 평균적으로 0.78 및 $0.34{\mu}g/m^3$이었으며, 전체 OC 및 WSOC 중의 평균 17.9%(범위: 0~44.4%) 및 평균 11.2%(범위: 0~51.4%)를 차지하였다. 광주지역 겨울철에 측정한 $SO_4^{2-}$ 입자는 국지적인 기상산화반응보다는 장거리 이동 또는 수용액 변환과정에 의한 영향, 구름 내 변환과정 등이 황산염 입자 생성에 중요하게 작용했을 것으로 판단한다.

• 한국대기환경학회지
• /
• 제32권3호
• /
• pp.320-328
• /
• 2016

Among biogenic volatile organic compounds (BVOCs) in the natural ecosystem, monoterpenes, along with isoprene, play important roles in atmospheric chemistry and make significant impacts on air pollution and climate change, especially due to their contribution to secondary organic aerosol production and photochemical ozone formation. It is essential to measure monoterpene concentrations accurately for understanding their oxidation processes, emission processes and estimation, and interactions between biosphere and atmosphere. Thus, traceable calibration standards are crucial for the accurate measurement of monoterpenes at ambient levels. However, there are limited information about developing calibrations standards for monoterpenes in pressured cylinders. This study describes about developing primary standard gas mixtures (PSMs) for monoterpenes at about 2 nmol/mol, near ambient levels. The micro-gravimetric method was applied to prepare monoterpene (${\alpha}$-pinene, 3-carene, R-(+)-limonene, 1,8-cineole) PSMs at $10{\mu}mol/mol$ and then the PSMs were further diluted to 2 nmol/mol level. To select an optimal cylinder for the development of monoterpene PSMs, three different kinds of cylinders were used for the preparation and were evaluated for uncertainty sources including long-term stability. Results showed that aluminum cylinders with a special internal surface treatment (Experis) had little adsorption loss on the cylinder internal surface and good long-term stability compared to two other cylinder types with no treatment and a special treatment (Aculife). Results from uncertainty estimation suggested that monoterpene PSMs can be prepared in pressured cylinders with a special treatment (Experis) at 2 nmol/mol level with an uncertainty of less than 4%.

• 한국대기환경학회지
• /
• 제25권4호
• /
• pp.325-338
• /
• 2009

National parks provide recreation, health, and science to human being. The provision of beautiful landscape view of the national park improves an economic and social phase of a nation. However, visibility impairment frequently occurred in the national park area of Gyeongju. The purpose of this study is to investigate the physical and the chemical characteristics of visibility reduction observed at the national park area of Gyeongju. Optical, chemical, meteorological characteristics and scenic monitoring were performed at the visibility monitoring station of Gyeongju University located at the Seoak section of Gyeongju national park from April 28 to May 9, 2008. Light extinction, light scattering, and light absorption coefficients were continuously measured using a transmissometer, a nephelometer, and an aethalometer, respectively. In order to investigate the impact of aerosol chemistry on visibility impairment, size-resolved aerosols were collected at intervals of 2-hour (from 8 A.M. to 6 P.M.) and 14-hour (from 6 P.M. to 8 A.M.) interval each sampling day. The average light extinction coefficient and the average visual range were measured to be $270{\pm}135\;Mm^{-1}$ and $14.5{\pm}6.3\;km$ during the intensive monitoring period, respectively. It was revealed that sulfate particle was the largest contributor to the light extinction under hazy condition. Organic mass accounted for about 26% of the average light extinction. The mass extinction efficiencies for $PM_{1.0}$, $PM_{2.5}$, and $PM_{10}$ were estimated to be 9.0, 4.7, and $2.7\;m^2\;g^{-1}$ under the consideration of water growth function of hygroscopic aerosols, respectively.

• Asian Journal of Atmospheric Environment
• /
• 제7권4호
• /
• pp.217-226
• /
• 2013

The collection of TSP and $PM_{2.5}$ aerosols has been made at the Gosan Site of Jeju Island during 2008-2011, and their ionic and elemental species were analyzed, in order to examine the seasonal variation and characteristics of aerosol compositions. The anthropogenic components ($NH_4{^+}$, $nss-SO_4{^{2-}}$, $NO_3{^-}$, S, Zn, Pb) and the soil components ($nss-Ca^{2+}$, Al, Fe, Ca) showed high concentrations in spring as the prevailing westerly wind, but the concentrations of the sea-salt components ($Na^+$, $Cl^-$) were high in winter. In TSP, the neutralization by $NH_3$ increased in summer, but the neutralization by $CaCO_3$ increased in spring and fall seasons. The organic acids ($HCOO^-$, $CH_3COO^-$) contributed to the acidification of the aerosols by only 5.0%, so the acidification could be mostly contributed by the inorganic acids ($SO_4{^{2-}}$, $NO_3{^-}$). From the examination of the source origins by factor analysis, the compositions of TSP were influenced by the order of soil > anthropogenic > marine, on the other hand, those of $PM_{2.5}$ were by the order of anthropogenic > marine > soil. The backward trajectory analyses showed that the concentrations of $NH_4{^+}$, $nss-SO_4{^{2-}}$, $NO_3{^-}$ and $nss-Ca^{2+}$ increased highly when the air masses had moved from China continent into Gosan area of Jeju Island.

• 한국대기환경학회지
• /
• 제32권6호
• /
• pp.593-602
• /
• 2016

The physicochemical characteristics of particulate matter emissions from various vehicle's fuel types were studied at the facility of Transport Pollution Research Center(TPRC), National Institute of Environmental Research (NIER), Korea. Three different types of fuels such as gasoline, liquefied petroleum gas (LPG) and diesel were tested on the NIER driving mode and the constant speed modes(30, 70, and 110 km/h). Chemical composition of submicron particles from vehicle emissions was measured by the High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) during running cycles. Organics were dominant chemical species of particulate matter emissions for all three different vehicles' fuel types. Moreover, regardless of fuel types, emission rate of organics and inorganics decreased as the average speed of vehicle increased. The portion of fully oxidized fragment families of $C_xH_yO_z$ accounted for over 98% of organic aerosol(OA) in LPG and diesel vehicles, while the relatively high fraction of $C_xH_y$ in OA was observed in gasoline vehicle.