• 전자공학회논문지D
• /
• 제36D권4호
• /
• pp.63-69
• /
• 1999

본 연구에서는 급속 열처리 온도와 분위기를 변화 시키면서 Pt/BST/Pt 커패시터의 전기적 특성 변화를 알아보고, 특성 개선에 대한 체계적인 원인을 분석하였다. 급속 열처리의 온도와 분위기에 따른 Pt/BST/Pt 커패시터의 전기적 특성 변화는 BST 박막 내의 산소 결핍과 관련이 있는 것으로 보인다. 이러한 사실을 확인하기 위하여 450℃, 20mttorr에서 산소와 산소 플라즈마 분위기에서 각각 열처리를 수행한 후 전기적 특성을 비교하였다. 산소 플라즈마에서 열처리를 수행한 BST 커패시터의 누설전류 전류밀도가 단순히 산소 분위기에서 열처리 한 시편과 비교하여 훨씬 낮았다. 또한, 산소 분위기에서 열처리를 수행한 BST 커패시터의 유전율이 약14%정도 감소한 반면, 산소 플라즈마에서 열처리를 수행한 유전율은 거의 감소가 없었다. 위의 결과는 반응성이 강한 산소 원자를 많이 포함하고 있는 산소 플라즈마가 산소 결핍을 보상하는데 있어서 매우 효과적임을 시사하고 있다. 결과적으로, BST박막 내의 산소 결핍이 BST커패시터의 누설전류 밀도와 유전율에 큰 영향을 미치고 있음을 추정할 수 있다. 그리고, 산소 플라즈마에서 열처리를 수행함으로써 유전율의 감소 없이 누설전류 밀도가 크게 개선된 BST커패시터를 얻을 수 있었다.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.654-664
• /
• 2006

Statement of problem: There has been a eat interest in the use of titanium for fixed and removable prostheses in recent because of its excellent biocompatibility. However, the melting temperature and chemical reactivity of titanium necessities casting system different from those used in conventional casting. The current titanium casting systems are based on an electric-arc design for melting the metal in an argon atmosphere and its exclusive investment. Despite the new development in Ti casting system, inadequate mold filling and internal porosity are frequently observed casting defects. Purpose : The purposes of this study were to compare the castibility and reaction layer of the casting titanium under the two casting machines and their investment condition. Material and method: coping and machine-milled titanium coping according to the casting methods and the marginal configurations. The total 28 specimens were used, and these are divided into 4 groups according to 2 casting machines and 2 investments. The castings were analyzed using x-ray microanalysis and microhardness testing. The reaction layer between margin of titanium casting and the investments was observed and analyzed with scanning electron microscope. Result: 1. Castabiliy of casting titanium specimen was best in the group of centrifugal casting machine and Selevest $CB^{\circledR}$ and good that of Selevest CB and pressure differential casting machine, Rematitan plus and centrifugal casting machine, Rematitan plus and pressure differential casting machine in order. 2. There was no significanct correlation in titanium castability in respect of casting machine. However ANOVA indicated that Selevest $CB^{\circledR}$ groups had significantly better castability than Rematitan $plus^{\circledR}$ groups.(p<0.05) 3. There was a significant microhardness difference between centrifugal casting machine groups and pressure differential groups.(p<0.05) Titanium castings in centifugal groups had significantly harder than those in pressure differential groups. 4. The addition of zirconia decreased interfacial reactivity. Conclusion: above result revealed that of the castability of titanium casting specimens had little correlation in casting machines and was better in magnesia-based investment contained ZrO2 groups. However in order to practice casting titanium in clininic, its castability should be improved, also there should be more research on factor of castability so that long-span prothesis and removable partial denture metla frame may be casted completly.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4205-4209
• /
• 2011

The $Li_2Mn_{0.5}Fe_{0.5}SiO_4$ silicate was prepared by blending of $Li_2MnSiO_4$ and $Li_2FeSiO_4$ precursors with same molar ratio. The one of the silicates of $Li_2FeSiO_4$ is known as high capacitive up to ~330 mAh/g due to 2 mole electron exchange, and the other of $Li_2FeSiO_4$ has identical structure with $Li_2MnSiO_4$ and shows stable cycle with less capacity of ~170 mAh/g. The major drawback of silicate family is low electronic conductivity (3 orders of magnitude lower than $LiFePO_4$). To overcome this disadvantage, carbon composite of the silicate compound was prepared by sucrose mixing with silicate precursors and heat-treated in reducing atmosphere. The crystal structure and physical morphology of $Li_2Mn_{0.5}Fe_{0.5}SiO_4$ was investigated by X-ray diffraction, scanning electron microscopy, and high resolution transmission electron microscopy. The $Li_2Mn_{0.5}Fe_{0.5}SiO_4$/C nanocomposite has a maximum discharge capacity of 200 mAh/g, and 63% of its discharge capacity is retained after the tenth cycles. We have realized that more than 1 mole of electrons are exchanged in $Li_2Mn_{0.5}Fe_{0.5}SiO_4$. We have observed that $Li_2Mn_{0.5}Fe_{0.5}SiO_4$ is unstable structure upon first delithiation with structural collapse. High temperature cell performance result shows high capacity of discharge capacity (244 mAh/g) but it had poor capacity retention (50%) due to the accelerated structural degradation and related reaction.

• Nuclear Engineering and Technology
• /
• 제38권2호
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• 공업화학
• /
• 제30권6호
• /
• pp.731-736
• /
• 2019

본 연구에서는 Pt/TiO₂를 파우더 및 허니컴 형태로 제조하고, 촉매의 피독 물질인 SO₂에 대한 영향과 재생 방안을 연구하였다. 이에 따라 Pt/TiO₂의 SO₂ 노출 전·후 촉매 활성을 비교하였다. Pt/TiO₂의 초기 활성은 주입되는 H₂ 농도(1~5%)에 비례하며, 촉매의 온도와 H₂ 전환율이 각각 최대 183 ℃와 95%로 나타났다. 2,800 ppm SO₂를 파우더 및 허니컴 Pt/TiO₂에 노출시켰고, 이때 성능이 나타나지 않았고 촉매 표면에 0.69%의 황(S)이 잔류함을 확인하였다. 피독 촉매에 대한 세척 및 열처리 결과, 파우더 촉매는 세척에 의해 96% 이상의 H₂ 전환율을 나타냈고 허니컴 촉매는 H₂ 또는 air 분위기의 열처리를 통해 촉매 활성이 재생되어 95% 이상의 H₂ 전환율이 확인되었다.

• 센서학회지
• /
• 제1권1호
• /
• pp.59-66
• /
• 1992

$BaSO_{4}$ : Eu 열형광체 분말을 제작하고 이를 PTFE로 중합한 디스크형의 $BaSO_{4}$ : Eu-PTFE 고감도 TLD 방사선 센서를 제작하였다. $BaSO_{4}$ : Eu 열형광체는 $BaSO_{4}$분말과 활성체인 Eu($Eu_{2}O_{3}$) 및 두가지 용제 $NH_{4}Cl$과 $(NH_{4})_{2}SO_{4}$를 각각 lmol%, 6mol% 및 5mol%의 농도로 묽은 황산에 공침하여 건조시킨 후 질소분위기에서 $1000^{\circ}C$로 1시간 동안 소결하여 제작하였을 때 $X/{\gamma}$선에 대해 최대감도를 나타내었다. 그리고 $BaSO_{4}$ : Eu glow 곡선의 주 피이크의 활성화에너지와 진동수인자 및 발광차수는 각각 1.17eV, $3.6{\times}10^{11}/sec$ 및 1.25이었으며, 발광 스펙트럼의 피이크 파장은 425nm였다. 한편 $BaSO_{4}$ : Eu-PTFE TLD의 최적제작조건은 열형광체 분말의 함량은 40wt%, TLD의 두께는 $105.7mg/cm^{2}$ 중합조건은 $380^{\circ}C$, 공기중에서 2시간으로 결정하였다. 그리고 ${\gamma}$선에 대한 TL 피이크 강도의 선량의존성은 0.01-20Gy영역에서 선형적이었으며, 감쇠율은 60시간에 약 10 %였다.

• 센서학회지
• /
• 제23권1호
• /
• pp.51-57
• /
• 2014

The evaporating materials for $MgGa_2Se_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $MgGa_2Se_4$ compounded polycrystal powder was deposited on thoroughly etched semi-insulated GaAs(100) substrate by the hot wall epitaxy (HWE) method system. The source and substrate temperatures of optimized growth conditions, were $610^{\circ}C$ and $400^{\circ}C$, respectively.The source and substrate temperatures were $610^{\circ}C$ and $400^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by double crystal X-ray diffraction (DCXD). The temperature dependence of the energy band gap of the $MgGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=2.34\;eV-(8.81{\times}10^{-4}\;eV/K)T^2/(T+251\;K)$. After the as-grown $MgGa_2Se_4$ single crystal thin films was annealed in Mg-, Se-, and Ga-atmospheres, the origin of point defects of $MgGa_2Se_4$ single crystal thin films has been investigated by the photoluminescence (PL) at 10 K. The native defects of $V_{Mg}$, $V_{Se}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Se-atmosphere converted $MgGa_2Se_4$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $MgGa_2Se_4$/GaAs did not form the native defects because Ga in $MgGa_2Se_4$ single crystal thin films existed in the form of stable bonds.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.69-69
• /
• 2002

Transgenic animals production tools have been valuable for research and purpose. The current methods of gene transfer, microinjection and nuclear transfer, which are widely used in transgenic animal production, but all most methods has only had limited success in production of larger species. Here, we report the possibility of a sperm-mediated gene transfer method in porcine embryos. Oocytes were collected from ovaries harvested at a local slaughterhouse were matured in 500${mu}ell$ drops of TCM-199 under mineral oil at 38.5$^{\circ}C$ in a humidified atmosphere of 5%CO2 in air. After 42-43h of in vitro maturation oocytes were denuded. for sperm injection into the cytoplasm of the porcine oocytes, sperm suspension in NIM medium are subjected extraction with TritonX-100 before mixing with a green fluorescent gene (GFP). Sperm with Tritonx-100 were prepared by adding TritonX-100 to a final volume of 0.05% in the sperm suspension and mixing by trituration for 60s before two wishes in NIM medium at 2$^{\circ}C$. A(ter wishing, sperm were mixed with TritonX-100 at $25^{\circ}C$ followed by washes at 2$^{\circ}C$. Sperm were resuspended in ice cold NIM to a final volume of 400${mu}ell$ and 2-20ng/${mu}ell$ DNA were triturated on ice for 60s. All microinjection was performed in HEPES-buffered CZB medium at room temperature within 2h. After culture in NCSU-23 for 72h, percent of porcine embryos transfected GFP gene are 20.7%(6/29) in 20ng/${mu}ell$ sperm-DNA mixed group and other groups were 3.7 %(2/54)and 4.7%(3/67). These data suggests that sperm-mediated gene transfer method should be used to the production tool of transgenic pig efficiently.

• 비파괴검사학회지
• /
• 제25권2호
• /
• pp.117-126
• /
• 2005

[ $AgGaS_2$ ] 단결정 박막을 수평 전기로에서 합성한 $AgGaS_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판 (반절연성 -GaAs (100))의 온도를 각각 $590^{\circ}C,\;440^{\circ}C$로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선 (DCRC)으로 부터 구하였다. $AgGaS_2$의 광흡수 스펙트럼으로부터 구한 온도에 의존하는 에너지 밴드갭 $E_g(T)$는 Varshni. 공식에 fitting한 결과 $E_g(T)=2.7284 eV-(8.695{\times}10^{-4}eV/K)T^2/T(T+332K)$를 잘 만족하였다. 성장된 $AgGaS_2$, 단결정 박막을 Ag, Ga, S분위기에서 각각 열처리하여 10K에서 photoluminescience(PL) spectrum을 측정하여 점 결함의 기원을 알아보았다. PL 측정으로부터 얻어진 $V_{Ag},\;V_s,\;Ag_{int}$, 그리고 $S_{int}$는 주개와 받개로 분류되어졌다. $AgGaS_2$ 단결정 박막을 Ag분위기에서 열처리하면 n형으로 변환됨을 알 수 있었다. 또한, Ca 분위기에서 열처리하면 열처리 이전의 PL스펙트럼을 보이고 있어서, $AgGaS_2$ 단결정 박막에서 Ga은 안정된 결합의 형태로 있기 때문에 자연 결함의 형성에는 관련이 없음을 알았다.

• 한국식품위생안전성학회지
• /
• 제26권4호
• /
• pp.342-348
• /
• 2011

본 연구에서는 박피생강(PG)의 CA저장효과를 규명하기 위하여 $O_2$ 농도를 5%로 고정하고 $CO_2$ 농도를 6%, 14%, 22%, 30%로 각각 조절한 후 포장하여 품질특성을 살펴보았다. 중량감소율의 경우 저장온도에 따른 차이를 나타냈고, $CO_2$ 농도가 높을수록 낮은 경향을 보였다. $10^{\circ}C$에서 저장한 생강의 표면색은 저장일수가 증가함에 따라 L값과 a값은 증가하였고 b값은 대조구와 유사한 결과를 나타냈으며, 절단면 색은 L, a, b 값 모두 대조구와 비교하여 큰 차이를 보이지 않았다. $25^{\circ}C$와 $10^{\circ}C$에서 각각 저장한 PG의 외부표면의 b값은 저장일수가 증가함에 따라 크게 변화하였고, 절단면 색의 경우는 저장기간 동안 큰 차이를 나타내지 않았다. 박피생강의 저장 중 경도의 경우 저장온도에 관계없이 $CO_2$ 농도 6%에서 가장 크게 감소하였고, $CO_2$ 농도가 높을수록 경도변화 폭이 적게 나타났다. 박피생강의 저장 중 미생물 변화는 $CO_2$ 농도가 높을수록 억제되는 경향을 보였고, $25^{\circ}C$ 저장 생강의 경우 농도에 관계없이 저장 4일 만에 $10^8$(CFU/g)으로 급격히 증가하였다.