• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.162-169
• /
• 1999

Herringbone groove journal bearing (HGJB) is developed to improve the static and dynamic performances of hydrodynamic journal bearing. Conventional studies on HGJB were based on the Narrow Groove theory assuming that the number of grooves approaches infinity. In this study, an oil lubricated HGJB is analyzed using Finite Element Method. Load carrying capacity, attitude angle, stiffness and damping coefficients are obtained numerically for various bearing configurations especially for the inclined width ratio and asymmetric ratio and compared with the results obtained using Finite Volume Method. The bearing load and stability characteristics are dependent on geometric parameters such as inclined width ratio, asymmetric ratio, groove depth ratio, groove width ratio, groove angle.

• Tribology and Lubricants
• /
• 제16권6호
• /
• pp.425-431
• /
• 2000

Herringbone groove journal bearing (HGJB) is developed to improve the static and dynamic performances of hydrodynamic journal bearing. Conventional studies on HGJB were based on the Narrow Groove theory assuming that the number of grooves approaches infinity. In this study, an oil lubricated HGJB is analyzed using Finite Element Method. Load carrying capacity, attitude angle, stiffness and damping coefficients are obtained numerically for various bearing configurations especially for the inclined width ratio and asymmetric ratio and compared with the results obtained using Finite Volume Method. The bearing load and stability characteristics are dependent on geometric parameters such as inclined width ratio, asymmetric ratio, groove depth ratio, groove width ratio, and groove angle.

• International Journal of Fluid Machinery and Systems
• /
• 제3권2호
• /
• pp.137-149
• /
• 2010

The purpose of the present research is to suppress cavitation instabilities by using a circumferential groove. The circumferential groove was designed based on CFD so that the tip leakage vortex is trapped by the groove and does not interact with the next blade. Experimental results show that the groove can suppress rotating cavitation, asymmetric cavitation and cavitation surge. However, weak instabilities with higher frequency could not be suppressed by the groove. From the analysis of pressure pattern similar to that for rotor-stator interaction, it was found that the higher frequency components are caused by the interaction of backflow vortices with the inducer blades.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.353-362
• /
• 2000

Herringbone groove journal bearing (HGJB) is developed to improve the static and dynamic performances of hydrodynamic journal bearing. In this study, static and dynamic compressible isothermal lubrication problems are analyzed by the finite element method together with the Newton-Raphson iterative procedure. This analysis is introduced for prediction of the static and dynamic characteristics of air lubricated HGJB for various bearing configurations. The bearing load characteristics and dynamic characteristics are dependent on geometric parameters such as asymmetric ratio, groove depth ratio, groove width ratio and groove angle.

• Journal of Welding and Joining
• /
• 제27권4호
• /
• pp.67-72
• /
• 2009

In this paper, arc characteristics of V groove joints using pulsed GMA welding were found out. The bevel angles of $22.5^{\circ}$ and $30.0^{\circ}$ were chose to make the V groove configuration with the groove angles of $45^{\circ}$ and $60.0^{\circ}$, respectively. In the experiment, the arc current waveform measurement and the high speed photography were taken to investigate the arc characteristics for a single-beveled asymmetric workpiece. Consequently, the welding current was changed abnormally around the edge of groove. As the arc moved close to the groove face, the welding current was increased rapidly because the welding arc was affected by the inclined surface. Also the welding current waveforms were measured for the double-sided symmetric workpiece to verify the previous measurements for the single-beveled workpiece, and similar current waveforms were found.

• Tribology and Lubricants
• /
• 제38권5호
• /
• pp.213-221
• /
• 2022

This paper presents performance measurements of pressure drop and leakage flow rate of test flat seals with asymmetric inclined grooves. This study aims to reveal the influence of groove shapes, often machined in radial film riding-face seals, in forming a hydrodynamic wedge on leakage performance. A test facility was developed, and test seals were manufactured to study the effects of the inlet pressure level, ratio of inlet to outlet pressure, seal groove length, and seal groove height on the steady-state pressure drop and leakage performance. A series of tests were conducted, and the test data were compared to the predictions from a simple and efficient mathematical model using a one-dimensional Reynolds equation. The test results revealed that an increase in the inlet pressure increased the pressure drop through the test seals. The leakage flow rate increased significantly as the inlet pressure and ratio of the inlet to outlet pressure increased. The groove shape also affects seal performance. An increase in the groove length and height resulted in an evident increase in the leakage flow rate. The simple model predictions underestimated the leakage flow rates but showed good agreement with the trend in the measurements for all test operating conditions and changes in the groove shape.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.109-111
• /
• 2004

아크 플라즈마의 온도 분포를 측정하는 방법으로 개발된 CCD 카메라를 이용한 온도 측정 방법을 비대칭 플라즈마의 온도 분포 측정에 적용하기 위해 비대칭 플라즈마의 데이터 변환에 이용 가능한 아벨 역산 방법을 개발하였다. 비대칭 플라즈마 중 V-groove 상의 아크는 타원형의 플라즈마로 볼 수가 있으므로 타원형의 단면을 가지는 플라즈마에 대해 온도 측정을 수행하고 그 결과로서 모재로 전달되는 아크의 열속(heat flux)의 분포를 예측 할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.748-752
• /
• 2004

Fluid dynamic bearings (FDBs) have been replacing ball bearings of the HDD spindle motor very rapidly. But there are several demerits of HDB, such as high friction torque, variable viscosity of the fluid lubricant depending on operating temperature, low stiffness, and etc. Eccentricity is one of the major parameters which affects the static and dynamic characteristics. As the static eccentricity is larger, the stiffness and the damping coefficients become bigger. But friction torque is relatively unaffected by the static eccentricity. This research proposes a new type of journal bearing with asymmetric journal grooves which results in better dynamic characteristics. The static and dynamic characteristics of the new journal bearing are investigated by solving the Reynolds' equation with FEM, and the transient analysis is performed to predict the dynamic behavior of rotor by solving the equations of motion of a HDD spindle system with Runge-Kutta method. The result shows that the proposed Journal bearings have much bigger stiffness and damping coefficients compared with the conventional symmetric ones. And consequently, it has smaller whirl radius and tilting angle.

• Journal of Chest Surgery
• /
• 제36권9호
• /
• pp.646-650
• /
• 2003

허혈성 승모판막 폐쇄부전에 대한 수술적 교정은 그간 많은 수기들이 보고되어 왔다. 본원에서는 인조혈관편을 이용한 후판막륜 성형술을 통하여 좋은 조기성적을 얻었기에 보고하고자 한다. 대상 및 방법 : 2001년 12월부터 2003년 1월까지 본원에서 허혈성 승모판막 폐쇄부전으로 진단받고 수술을 시행한 환자에서 유두근 파열에 의한 치환술 환자를 제외한 22명을 대상으로 하였고 남자는 13명이었다. 술 전 위험인자로는 저좌심실구출률(<35%)이 9예, 당뇨가 7예, 고혈압이 13예, 신부전(Cr>2.5 mg/dl)이 4예였다. 수술 수기는 좌심방이 작은 경우가 많은 이유로 승모판막의 노출을 용이하게 하기 위하여 상대정맥과 하대정맥에 각각 정맥캐뉼라를 삽관하고 양대정맥 위아래로 충분히 박리를 시행하였다. 약 6mm 두께의 인조혈관편으로 8∼10개의 단절 수평봉합뜨기를 이용하여 후판막륜을 줄여주었다(비대칭술이 14예, 대칭술이 8예). 동반 술기로는 관상동맥 우회로숭리 21예, Dor 술식이 3예, 삼첨판막 성형술이 1예, 미로술식이 1예, 대동맥-쇄골하동맥간 우회술이 1예 있었다. 결과: 수술 관련되어 사망은 1예가 있었고 이를 제외한 나머지 환자의 평균 역류지수는 2.95에서 0.88로 감소하였다. 그러나 술 전후로 평균 심실구출률은 별다른 변화는 없었다. 퇴원 직전 시행한 심초음파상 승모판막 폐쇄부전이 없었던 경우가 8예, 경미한 경우가 11예, 경도가 2예, 경도에서 중등도 사이가 1예 있었다. 결론: 인조혈관편을 이용한 후판막륜 성형술은 허혈성 승모판막 폐쇄부전의 치료에 있어서 안전하고 경제적인 방법으로 생각되며 향후 승모판막의 기능 평가를 위하여 장기간 추적 관찰이 필요할 것으로 생각된다.