• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.4
• /
• pp.533-546
• /
• 2021

Large earthquakes with (M_W > ~ 6) result in ground shaking, surface ruptures, and permanent deformation with displacement. The earthquakes would damage important facilities and infrastructure such as large industrial establishments, nuclear power plants, and waste disposal sites. In particular, earthquake ruptures associated with large earthquakes can affect geological and engineered barriers such as deep geological repositories that are used for storing hazardous radioactive wastes. Earthquake-driven faults and surface ruptures exhibit various fault zone structural characteristics such as direction of earthquake propagation and rupture and asymmetric displacement patterns. Therefore, estimating the respect distances and hazardous areas has been challenging. We propose that considering multiple parameters, such as fault types, distribution, scale, activity, linkage patterns, damage zones, and respect distances, enable accurate identification of the sites for deep geological repositories and important facilities. This information would enable earthquake hazard assessment and lower earthquake-resulted hazards in potential earthquake-prone areas.

• Steel and Composite Structures
• /
• v.47 no.2
• /
• pp.203-216
• /
• 2023

The composite beam connections often encountered fracture failure in the welded bottom flange joint, and a bottom flange bolted connection has been proposed to increase the deformation ability of the bottom flange joint. The seismic performance of the bottom flange bolted composite beam connection was suffered from both the composite action of concrete slab and the asymmetric load transfer mechanisms between top and bottom beam flange joints. Thus, this paper presents a comprehensive numerical study on the working mechanism of the bottom flange bolted composite beam connections. Three available modelling methods and a new modelling method on the flange-stud-slab interactions were compared. The efficient numerical modeling method was selected and then applied to the parametric study. The influence of the composite slab, the bottom flange bolts, the shear composite ratio and the web hole shape on the seismic performance of the bottom flange bolted composite beam connections were investigated. A hogging strength calculation method was then proposed based on numerical results.

• Journal of the Korean Society of Visualization
• /
• v.21 no.1
• /
• pp.40-46
• /
• 2023

For application to drag-based propulsion system, the dynamics of a segmented structure with multiple hinges undergoing oscillatory motion are investigated. The side flaps are connected to a centre rod with elastic plates acting as hinges. The hinges bend to only one direction so that the structure behave asymmetrically between the power stroke and the recovery stroke. An analytical model is proposed, which estimates the asymmetric deformation of the segmented structure coupled with hinges. Using the proposed model, the effects of key geometric and kinematic parameters on the dynamics of the structure are analyzed.

• Economic and Environmental Geology
• /
• v.23 no.4
• /
• pp.453-463
• /
• 1990

The Yechon shear zone developed by strike-slip movement was formed in a relatively high temperature condition just after the Jurassic syntectonic granites had been emplaced during Daebo Orogeny. Post-emplacement formation of the shear zone is favored by continuity of foliations and lineations within and without the granites, development of mylonitic structures in the wallrocks, deformation of pegmatite and felsite dikes, and pretectonic growth of porphyroblasts in the wallrocks. A variety of shear sense indicators in the shear zone are predominantly observed in the intensely to extremely deformed rocks. They show that bulk non-coaxial detormation has occurred, and that the sense of shear is consistently dextral with S-C fabrics, grain shape fabrics, asymmetric porphyroclast systems, mica fish, asymmetric extension structures and quartz C-axis fabrics.

• Transactions of Materials Processing
• /
• v.31 no.4
• /
• pp.214-228
• /
• 2022

The yield criterion, or called yield function, plays an important role in the study of plastic working of a sheet because it governs the plastic deformation properties of the sheet during plastic forming process. In this paper, we propose a novel anisotropic yield function useful for describing the plastic behavior of various anisotropic sheets. The proposed yield function includes the anisotropic version of the second stress invariant J₂ and the third stress invariant J₃. The anisotropic yield function newly proposed in this study is as follows. F(J₂)+ αG(J₃)+ βH (J₂ × J₃) = k^m The proposed yield function well explains the anisotropic plastic behavior of various sheets by introducing the parameters α and β, and also exhibits both symmetrical and asymmetrical yield surfaces. The parameters included in the proposed model are determined through an optimization algorithm from uniaxial and biaxial experimental data under proportional loading path. In this study, the validity of the proposed anisotropic yield function was verified by comparing the yield surface shape, normalized uniaxial yield stress value, and Lankford's anisotropic coefficient R-value derived with the experimental results. Application for the proposed anisotropic yield function to aluminum sheet shows symmetrical yielding behavior and to pure titanium sheet shows asymmetric yielding behavior, it was shown that the yield curve and yield behavior of various types of sheet materials can be predicted reasonably by using the proposed new yield anisotropic function.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.215-224
• /
• 2024

In medium- and long-range optical imaging systems, atmospheric turbulence causes blurring and distortion of images, resulting in loss of image information. An image-restoration method based on an adaptive feature-fusion multi-input-multi-output (MIMO) dense U-shaped network (Unet) is proposed, to restore a single image degraded by atmospheric turbulence. The network's model is based on the MIMO-Unet framework and incorporates patch-embedding shallow-convolution modules. These modules help in extracting shallow features of images and facilitate the processing of the multi-input dense encoding modules that follow. The combination of these modules improves the model's ability to analyze and extract features effectively. An asymmetric feature-fusion module is utilized to combine encoded features at varying scales, facilitating the feature reconstruction of the subsequent multi-output decoding modules for restoration of turbulence-degraded images. Based on experimental results, the adaptive feature-fusion MIMO dense U-shaped network outperforms traditional restoration methods, CMFNet network models, and standard MIMO-Unet network models, in terms of image-quality restoration. It effectively minimizes geometric deformation and blurring of images.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.389-395
• /
• 2005

The etching technology of the high aspect ratio contact(HARC) is necessary at the critical contact processes of semiconductor devices. Etching the $SiO_{2}$ contact hole with the sub-micron design rule in manufacturing VLSI devices, the unexpected phenomenon of 'profile tilting' or 'bottom distortion' is often observed. This makes a short circuit between neighboring contact holes, which causes to drop seriously the device yield. As the aspect ratio of contact holes increases, the high C/F ratio gases, $C_{4}F_{6}$, $C_{4}F_{8}$ and $C_{5}F_{8}$, become widely used in order to minimize the mask layer loss during the etching process. These gases provide abundant fluorocarbon polymer as well as high selectivity to the mask layer, and the polymer with high sticking yield accumulates at the top-wall of the contact hole. During the etch process, many electrons are accumulated around the asymmetric hole mouth to distort the electric field, and this distorts the ion trajectory arriving at the hole bottom. These ions with the distorted trajectory induce the deformation of the hole bottom, which is called 'profile tilting' or 'bottom distortion'. To prevent this phenomenon, three methods are suggested here. 1) Using lower C/F ratio gases, $CF_{4}$ or $C_{3}F_{8}$, the amount of the Polymer at the hole mouth is reduced to minimize the asymmetry of the hole top. 2) The number of the neighboring holes with equal distance is maximized to get the more symmetry of the oxygen distribution around the hole. 3) The dual frequency plasma source is used to release the excessive charge build-up at the hole mouth. From the suggested methods, we have obtained the nearly circular hole bottom, which Implies that the ion trajectory Incident on the hole bottom is symmetry.

• Computers and Concrete
• /
• v.30 no.5
• /
• pp.311-321
• /
• 2022

The interfacial bond strength of partially encased composite (PEC) structure tends to 0, therefore, the cast-in-place concrete theoretically cannot embody better composite effect than the fabricated structure. A total of 12 specimens were designed and experimented to investigate the energy dissipation and damage of fabricated PEC beam through unidirectional cyclic loading test. Because the concrete on both sides of the web was relatively independent, some specimens showed obvious asymmetric concrete damage, which led to specimens bearing torsion effect at the later stage of loading. Based on the concept of the ideal elastoplastic model of uniaxial tensile steel and the principle of equivalent energy dissipation, the energy dissipation ductility coefficient is proposed, which can simultaneously reflect the deformability and bearing capacity. In view of the whole deformation of the beam, the calculation formula of energy dissipation is put forward, and the energy dissipation and its proportion of shear-bending region and pure bending region are calculated respectively. The energy dissipation efficiency of the pure bending region is significantly higher than that of the shear-bending region. The setting of the screw arbors is conducive to improving the energy dissipation capacity of the specimens. Under the condition of setting the screw arbors and meeting the reasonable shear span ratio, reducing the concrete pouring thickness can lighten the deadweight of the component and improve the comprehensive benefit, and will not have an adverse impact on the energy dissipation capacity of the beam. A damage model is proposed to quantify the damage changes of PEC beams under cyclic load, which can accurately reflect the load damage and deformation damage.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.151-165
• /
• 1997

The Kyemyeongsan area of Chungju in the NE part of the Ogcheon metamorphic zone, Koera, consists mainly of the Ogcheon Supergroup(Taehyangsan Quartzite, Hyangsanri Dolomite and Kyemyeogsan Formation) and the MeSozoic Chungju granite. The Kyemyeongsan Formation is composed mainly of metamorphic rocks of various grades derived from conglomeratic, basic, acidic, pelitic and psammitic rocks. The basic and acidic rocks show alternated or interfingered appearence, indicating that they were derived form bimodal type of magmatism in rift environment. Conglomeratic rocks overlie acidic volcanic rocks in geneal, but are underlain by both acidic plutonic and volcanic rocks. This indicaties that the acidic magmatism before the formation of conglomeratic rocks was different from that during or after the formation of conglomeratic rocks in its occurrence mode. The geological structure of the Ogcheon metamorphic zone in the Kyemyeongsan area, Chungju was formed at least by three phases of deormation. The first phase deformation(D1) formed a regional-scale sheath-type fold(F1) closed into the east. Its axial phane(S1) strikes NNW to NW and dips WSW to SW. The stetching lineation(L1), related to the sheath-type fold, plunges westward. The second phase deformation (D2) formed asymmetric fold(F2) of ESE-to SE-vergence with NNE to NE striking axial plane(S2) and $20~45^{\circ}/210~230^{\circ}$ plunging axis(L2). The F2 fold reoriented the original westward plunging L1 into northwestward plunging L1 in its lower limb(overturned limb). The third phase of deformation(D3) was recognized as chevron-type fold(F3) with $45^{\circ}/265$^{\circ}$ plunging axis. The F3 fold was formed by the compression of N-S direction, resulting in the reorientation of the original $20-45^{\circ}/210~230^{\circ}$ plunging L2 into mainly $35~45^{\circ}/260~280^{\circ}$ and subsidiarily $30~45^{\circ}/135~165^{\circ}$ plunging L2. After this deformation, open fold with NS striking and steeply E or W dipping axial plane is formed by the compression of E-W direction.

• Steel and Composite Structures
• /
• v.35 no.5
• /
• pp.659-670
• /
• 2020

This paper proposes the use of a porous core between layers of laminated composite plates to examine its effect on the natural frequencies of the resulted porous laminated composite sandwich plate (PLCSP) resting on a two-parameter elastic foundation. Moreover, it has been suggested that the dispersion of porosity has two different functionally graded (FG) patterns which are compared with a uniformly dispersed (UD) profile to find their best vibrational efficiency in the proposed PLCSPs. In FG patterns, two types of dispersions, including symmetric (FG-S) and asymmetric (FG-A) patterns have been considered. To derive the governing Eigen value equation of such structures, the first order shear deformation theory (FSDT) of plates has been employed. Accordingly, a finite element method (FEM) is developed to solve the derived Eigen value equation. Using the mentioned theory and method, the effects of porosity parameters, fiber orientation of laminated composite, geometrical dimensions, boundary conditions and elastic foundation on the natural frequencies of the proposed PLCSPs have been studied. It is observed that embedding porosity in core layer leads to a significant improvement in the natural frequencies of PLCSPs. Moreover, the natural frequencies of PLCSPs with FG porous core are higher than those with UD porous core.