• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.91-98
• /
• 2011

This study is to concern about the effort of architectural practice to realize the sustainable architecture. It is necessary to know about the integrated design method which combines the passive design method with the active design method from the initial design phase. One case study is followed to explain the method. Integrated design starts from defining the project and goal setting, site evaluation, design concept, design optimization, documents and specifications, bidding and construction and post occupancy evaluation followed respectively. In order to construct the sustainable design, sophisticated understanding about nature and its' principle is important and adaptable application of nature and climate depending on location is followed. In conclusion, architects and specialists of sustainable design should make an effort more study.

• 대한가정학회지
• /
• 제45권10호
• /
• pp.13-20
• /
• 2007

A new method for competent extraction of safflower (Carthamus tinctorius Linnaeus) colorants by using ultrasonic device was developed. When comparing to general extraction method, the ultrasonic method showed high extraction efficiency of safflower pigments. Ultrasonic method gave a higher extraction yield of red and yellow safflower pigments than using general method. It is supposed that the extraction efficiency is to be attributed to high vibration energies from ultrasound and finally induced physical changes of the pigments. Furthermore, this study explored the effects of ultrasonic treatment into the extracted safflower pigments on dyeing of cotton fabrics. Ultrasonic treatment into the extracted pigments exhibited significantly improved dyeing properties for the cotton fabrics.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.34-42
• /
• 2011

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fibers, followed by fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the Hobart mixer were effective on increasing tensile and tear strength at fast drainage, but there were no further increase by kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.867-872
• /
• 2005

This study introduces a method to evaluate the probability of a specific area to be affected by a drought of a given severity and shows its potential for investigating agricultural drought characteristics. The method is applied to Gyeonggi as a case study. The proposed procedure includes Standard Precipitation Index(SPI) time series, which are linearly transformed by the Empirical Orthogonal Functions(EOF) method, These EOFs are extended temporally with AutoRegressive Moving Average(ARMA) method and spatially with Kriging method. By performing these simulations, long time series of SPI can be simulated for each designed grid cell in whole Gyeonggi area. The probability distribution functions of the area covered by a drought and the drought severity are then derived and combined to produce drought severity-area-frequency(SAF) curves.

• 기술사
• /
• 제22권3호
• /
• pp.5-13
• /
• 1989

A major problem of stopwatch time study is how to do for the accurate and consistent performance rating, which is one of the critical variables to determine the accuracy of work measurement and should be still dependent upon time observer's judgement. Therefore the time observer's ability for the performance rating is very important, and must be improved by correct training method and procedure. This paper developed a new benchmark and benchmark-observation method for the effective performance rating training of assembling and machining operations. The trainees' ability in the accuracy and consistency of the performance rating ,improved significantly after being trained by subject method. The percentage improvement in rating accuracy and consistency values was 34.7% and 49% respectively. In addition, benchmark-practice method for the performance rating training is not significant, so it is proofed that the skill of a certain operation is not important for the improvement of the rating ability.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.433-440
• /
• 2006

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fiber, and ensued fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the mixer were effective on increasing tensile and tear strength at fast drainage, but not kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.691-695
• /
• 2004

In recent years, mary studies for efact estimation of groudwater recharge has been performed. They can be categorized into three groups : analytical method by means of groundwater recession curve, water budget analysis based on watershed, and the method using groundwater model. Since groundwater recharge rate shows the spatial-temporal variability due to hydrogeological heterogeneity, existing studies have various limits to deal with these characteristics. The method of estimating daily recharge rate with spatial-temporal variation based on rainfall-runoff model is suggested in this study for this purpose. This method is expected to enhance existing indirect method by means of reflecting climatic conditions, land use and hydrogeological heterogeneity.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1392-1396
• /
• 2007

The governing equations in generalized curvilinear coordinates for 3D laminar flow are the Incompressible Navier-Stokes (INS) equations with the artificial dissipative terms. and continuity equation discretized using a second-order accurate, finite volume method on the nonstaggered computational grid. This method adopts a dual or pseudo time-stepping Artificial Compressibility (AC) method integrated in pseudo-time. Multigrid methods are also applied because solving the equations on the coarse grids requires much less computational effort per iteration than on the fine grid. The algorithm yields practically identical velocity profiles and secondary flows that are in excellent overall agreement with an experimental measurement (Humphrey et al., 1977).

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1880-1884
• /
• 2007

The Natural Resource Conservation Service Curve Number(NRCS-CN) method is one of the widely used methods for computation of runoff from a basin. However, NRCS-CN method has weak point in that the spatial land use distribution characteristics are ignored by using area weighted CN value. This study developed a program which can estimate runoff by considering spatial distribution of CN and flow accumulation at the outlet of the watershed by appling Moglen's method. Comparisons between the results from NRCS-CN method and this study showed good agreement with measured data of experimental watersheds. The developed program predicted lower runoff than the conventional NRCS-CN method. As a conclusion, this study proposes a new design direction which can simulate real runoff phenomena. And the developed program could be applied into runoff minimization design for a basin development.

• 대한가정학회지
• /
• 제39권12호
• /
• pp.177-188
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to each sensory test of the frontal view, back view, side view and silhouette Block Pattern I is the best of them in summation of the sensory tests score. Block, Pattern D and I have good shape too. However the best block Pattern D shows good score in evaluation of overall fitness and silhouette. 2. Most of block patterns, which show high scores in sensory tests, are the Compromise Method taking merits of the Proportional Method and Short Measure Method among the Pattern Drafting Methods. Box-shape patterns show low score in the sensory tests. 3. Regarding to the number of measurement, the patterns of the Compromise Method using 6-8 measurements seem to be optimal. In degree of fitness, loose fit type basic patterns are better than other patterns from a viewpoint of the total satisfaction.