• Corrosion Science and Technology
• /
• v.4 no.4
• /
• pp.155-163
• /
• 2005

Heavy duty coating are required to have minimum durable period of 15 years under average usage environment because these paints are coated with purpose of anti-corrosion, antifouling, plastering etc. Onto steel structures constructed upon land and sea and other ferrous structures of electric power generation plants, electricity transmission towers, large structures of various plants, etc. Therefore we tried to estimate heavy duty coating longevity through reliability evaluation method and used combined cyclic anti-conrrosion test method composed of drying, moisturizing and salt spray as for accelerated life test to estimate longevity. Accelerated life test hours to heavy duty coating of first grade (with longevity not less than 15 years) specification may be obtained from troubleless test hours $t_n=\frac{B_p}{n^{1/\beta}}\left[\frac{1n(1-CL)}{1n(1-p)} \right]^{1/\beta}=19.671$ (yr) where shape parameter $\beta=1.1$, confidence level CL=80 %, warranty life $B_{10}=15$ yr and sampling size n=10 (2 sets). Because acceleration factor {AF} found by accelerated test is 41.7, accelerated life test hours required may be represented about 4,132 hr so that if this amount of hours is converted to number of cycles(6 hr/cycle) of complex cycle corrosion resistance test then the amount is tantamount about 690 cycles. That means if there does not occur trouble failure (with defect factor sum not more than 20) during when there is performed 690 cycles of combined cyclic anti-corrosion test to heavy duty coating specimen then it signifies that there can be warranted longevity $B_{10}$ of 15 yr under condition of confidence level CL=80 %.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1494-1496
• /
• 2007

This paper deals with image quality analysis considering the impact of psychological factors involved in assessment. The attributes of image quality requirement were partitioned according to the visual perception characteristics and the preference of image quality were obtained by the factor analysis method. The features of image quality which support the subjective preference were identified, The adequacy of image is evidenced to be the top requirement issues to the display image quality improvement.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.126-134
• /
• 1998

In this paper, the field test by truck load and the structural analysis were performed on a prestressed concrete beam bridge to investigate the load carrying capacity of the prestressed concrete beam bridges. From the results of the field test and the structural analysis, CAF (composite action factor), TIF(transformed impact factor), and $P_n$(load carrying capacity) of the prestressed concrete beam bridges were studied, and the load carrying capacity assessment of the prestressed concrete beam bridges were carried out using these factors.

• Korean Journal of Psychosomatic Medicine
• /
• v.4 no.1
• /
• pp.21-36
• /
• 1996

This study was attempted to investigate reliability and validity of premenstrual assessment form(PAF). PAF was administered to 230 high school students who had reported premenstrual changes. PAF revealed considerable diversity in premenstrual symtom changes of the subjects. The items with most frequent reported premenstrual changes were 21 items out of 95. Cronbach's internal consistency was .95, and test-retest reliability was .80. Validity test was performed by constructional validation analysis. 8 factors(impulsive & unstable factor, depressive factor, withdrawal & social functioning impairment factor, anxiety & cognitive dysfunction factor, physiological factor, general discomfort factor, increased well-being factor, other factor) emerged at factor analysis. Each of them accounted for 33.97, 5.10, 3.70, 2.93, 2.64, 2.46, 2.12, 2.03 of total variance respectively. High school students experienced impulsive & unstable features of premenstrual symptoms more frequently. This study suggests PAF can be a reliable and valid tool as a initial screening and evaluation of premenstrual changes. finally, factor analysis result was compared with PAF typological categories.

• Journal of Environmental Impact Assessment
• /
• v.12 no.2
• /
• pp.87-98
• /
• 2003

The main purpose of this study is to propose the integrated assessment model for the rational and effective selection of proposed sites in National Trust (NT) and conserve the ruined natural environment by excessive land development. The results of this study are as follows; 1) The specialists thought that rare and endangered species were very important in plant and animal, in case of landscape and environment, naturality and water quality were too important. 2) In the result of the correlation measure on the indicator of assessment, 'erosion of soil'and 'air pollutant'was highly correlative. Secondly, 'suspended solids' and 'erosion of soil'was high correlation. 3) In the result of forming the factors into the integrated indicators, they were classified into conditional, stable, valuable and potential factors and the purpose of this formation is to evaluate proposed sites in NT objectively and rationally with organic assessment. 4) In the integrated assessment model, the degree of explanation was observed approximately 36.4% and the important factor was the conditional factor, but we have to consider all factors for the effective and objective assessment. Therefore we organically have to apply and use them for the assessment of proposed sites in NT. It turns out to offer raw data on the land conservation and carry out the role of the instrument of measurement. As for future directions, the follow are proposed: 1) adaptation of real proposed site, 2) verification of effect and problem, 3) practical survey for diverse types as mountain, coast and inland.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.164.1-164.1
• /
• 2011

Previously, many researchers assessed nearshore wave energy in two ways. The first is a simulation with respect to the offshore wave time series to validate the wave buoy data and the wave model results, and the other is to simulate the representative waves of typical seasonal wave conditions. The former requires enormous computational time and effort. The latter yields inspection on the patterns for the spatial and temporal distribution of nearshore wave energy but tends to underestimates the amount of wave energy in the nearshore region owing to the correlation between the significant wave height and wave period. $\ddot{O}$zger et al. (2004) derived the stochastic wave energy formulation by introducing a correction factor explicitly in terms of the covariance of the wave energy and significant wave height. In this study, a correction factor was applied for the assessment of nearshore wave energy obtained by numerical simulation of wave transformation with respect to representative waves.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1139-1148
• /
• 1999

This paper discussed the assessment of hand of denim fabrics finished by enzymatic hydrolysis. The semantic differential scale established using the database collected from university students. Analyzing the subjective rating by common factor analysis with oblimin rotation five factors expressing the hand were induced. Factor one was the surface property related to the surface roughness or softness Factor two was the durability which was related to the compactness and bearing strength Factor three was the sense of weight which was related to the thickness and weight. The moisture related properties and the sense of shape recovery were the forth and fifth factors respectively. the evaluations on the surface property weight and moisture related properties were similar by men and women However the shape recovery and the durability were evaluated differently. Surface and weight related properties were important factors judging the hand of fabrics by both group.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.53-60
• /
• 2008

The work-related musculoskeletal disorders have constantly increased since it became an issue in 1996. In 2002, the Government established the risk factors analysis system in order to prevent musculoskeletal disorders. The proclamation by the Ministry of Labor defined eleven spheres of work associated with musculoskeletal disorders. As a result, business proprietors, who have workers engaged in tasks associated with musculoskeletal disorders, are required to conduct the risk factor analysis on a regular basis every three years. However, numerous issues have been raised while carrying out the risk factor analysis in various industries. One of the issues is that even though work sampling is an ideal method in risk factor analysis, most cases have selected extreme task postures, which is judged by an expert, due to limited time. This study will propose the desired direction of the risk factor analysis by comparing task assessment results between work sampling scenes and extreme task scenes.

• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.123-135
• /
• 1997

The solid waste incineration facilities which cause environmental pollution. And those are some kind of loathing facilities for residents who do not want it. This problem could be solved by location feasibility study. The purpose of location feasibility study was to determine one site out of three candidate sites. This study which was done by the law, environmental and economic factor was considered for optimum site selection. Comparative evaluation among the candidate sites was done by ordinal scale and thus the optimum site was selected.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.36-43
• /
• 1998

The purpose of study is to propose numerical assessment methods of lateral deformation shape under lateral loads for regular high-rise buildings. The normalized 1st mode shape is used to assess lateral deformation shape. The assessment method are mass participation factor, representative value by RMS, the mean value, median of the nomalized 1st mode shape. These methods are able to know a fundamental lateral deformation shape of the building and effects of interactive systems numerically. Generally the characteristics of normalized 1st mode shape for various models coincide with numerical assessment results.