• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.28-34
• /
• 1997

This paper describes an automatic measurement method for the in-line inspection of assembly tolerances of cathod ray electron guns. The method uses an optical microscope with a CCD camera as a probe. An automatic gap recognition algorthm with digital image processing and a new software autofocus algorithm based on using an optimal edge detector have been developed to improve the measuring accuracy. An inspection system has been proposed and practically implemented for in-line inspection to a real factory automation line. The inspection system consists of a gap inspection part and an eyelet. Total time consumed for inspecting all measuring items is about 10 seconds and the repeatability is below .+-. 5 .mu. m

• IE interfaces
• /
• v.23 no.1
• /
• pp.58-67
• /
• 2010

The purpose of this paper is to present the development processes of the assembly line tester of power transmission for lift truck. Because power transmission is most important part of lift truck, all assembled powertrain parts must be inspected for operational defects, pressures and RPM. Developed assembly line tester is designed to take about 25 minutes for inspecting each assembled power transmission and located it at the end of assembled line. The assembly line no-load tester consists of three parts: (1) the driving hardware part; for installing and operating the transmission. (2) control PCB part; send data from sensors to a computer and control driving part, (3) operation software of no-load tester; for an automatic inspection or manual inspection, for database management and printing transcripts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.12-18
• /
• 2009

In this paper, for reducing the assembly torque of subminiature plastic barrel and base which are the essential parts of mobile phone camera module, the high-precision system for inspecting the screw shape of core, electrode and injection molding products was developed. For realization of inspection process, the inspection parameters for evaluating the manufacturing quality were selected and the measurement methods of selected parameters were developed. Finally, the inspection system which is possible to be applied to the field were fabricated.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.181-190
• /
• 2019

Today, in the information society, since the government administration of all countries places importance on clarity and efficiency, the authority concentration of the administration is inevitable. Therefore, the Parliament, which is a legislative body, is at a time when the policy control function to check and monitor it is becoming more important. In particular, due to the emergence of parliamentary democracy, in the reality that the people must elect representatives and represent their own opinions, the parliamentary inspection system is very valuable in that it satisfies the right of the people to know and ultimately enables the people to democratically control the administration. The role of the Parliament moves from the inherent legislative function to the information collection and disclosure of government administration, discussion and resolution of political issues, and observation and supervision of the administration. And it can be seen as the global trend. As a result of this trend, status and role of the National Assembly is being strengthened from the legislative body to the control agency of government administration. Thus, the most substantive authority of Article 61 of the Constitution can be deemed the parliamentary inspection system. The parliamentary inspection system is a system that let exercise the legislation, budget, and authority to control of state administration by identify the challenges and policy implementation of each country's institutions through the audit of the executive administration's overall government administration performance outside the National Assembly. However, due to the amendment of Constitution in 1988, the parliamentary inspection right and investigation of state administration right had reinstated and the parliamentary inspection system, which is being implemented annually, is the 31st year of the year in 2019. However, the general evaluation of the public is negative and insufficient time for inspections, lack of sanctions on nonattendance witnesses, excessive data submission, and refusal to submit materials by the administration were pointed out as the problem. Therefore, in this paper, the researcher tries to point out the overall problems of the parliamentary inspection system and to summarize the effective improvement plans.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.631-632
• /
• 2006

The assembly of camera lens modules fur the mobile phone has not been automated so far. They are still assembled manually because of high precision of all parts and hard-to-recognize lens by vision camera. In addition, the very short life cycle of the camera phone lens requires flexible and intelligent automation. This study proposes a fast and accurate identification system of the parts by distributing the camera for 4 degree of freedom assembly robot system. Single or multi-cameras can be installed according to the part's image capture and processing mode. It has an agile structure which enables adaptation with the minimal job change. The framework is proposed and the experimental result is shown to prove the effectiveness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3617-3624
• /
• 2013

Screen inspection system applied vision and laser scan technology which detect foreign materials caused fuel rod to be damaged, and which inspect fuel rod damage, bowing, distortion and grid damages, was developed to secure reliability and reproductivity of inspection method for nuclear fuel assembly during outage. In further, datum of inspection results will be continuously monitored and given understand the pattern of bowing and distorting for fuel assembly in reactor. Understanding of the pattern will be key technical information to avoid grid demage might be happened during refueling outage and provides important data base for safe operation of nuclear power plant in Korea and world wide.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1099-1104
• /
• 2013

This paper presents a learning-based visual inspection method that addresses the need for an improved adaptability of a visual inspection system for parts verification in panorama sunroof assembly lines. It is essential to ensure that the many parts required (bolts and nuts, etc.) are properly installed in the PLC sunroof manufacturing process. Instead of human inspectors, a visual inspection system can automatically perform parts verification tasks to assure that parts are properly installed while rejecting any that are improperly assembled. The proposed visual inspection method is able to adapt to changing inspection tasks and environmental conditions through an efficient learning process. The proposed system consists of two major modules: learning mode and test mode. The SVM (Support Vector Machine) learning algorithm is employed to implement part learning and verification. The proposed method is very robust for changing environmental conditions, and various experimental results show the effectiveness of the proposed method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.269-277
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceding/succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing/assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit (AOQL) are suggested.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.119-125
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding / succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing / assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit(AOQL) are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109.2-109
• /
• 2001

In the PCB assembly lines, as components become more complex and smaller, the conventional inspection method using traditional ICT and function test show their limitations in application. The automatic optical inspection(AOI) gradually becomes the alternative in the PCB assembly line. In Particular, the PCB inspection machines need more reliable and flexible object recognition algorithms for high inspection accuracy. The conventional AOI machines use the algorithmic approaches such as template matching, Fourier analysis, edge analysis, geometric feature recognition or optical character recognition (OCR), which mostly require much of teaching time and expertise of human operators. To solve this problem, in this paper, a statistical learning based part recognition method is proposed. The performance of the ...