• Applied Biological Chemistry
• /
• 제2권
• /
• pp.23-28
• /
• 1961

된장, 간장용 고일(一)지 원료(原料)의 배합비율(配合比率)을 달리하여 만든 고일(一)지의 효소역가(酵素力價)와 이에서 만든 된장의 숙성과정(熟成過程)을 조사(調査)한 결과(結果)는 다음과 같다. 1). 콩이나 보리를 단용(單用)한 고일(一)지보다 대두(大豆):정맥(精麥):소맥(小麥)의 비율(比率)을 $40{\sim}60:$60{\sim}40::20으로 배합(배합)한 고일(一)지가 호정화력(糊精火力), 당화력(糖化力), 단백질분해력(蛋白質分解力)에서 훨씬 우수(優秀)하였다. 2). 보리고일(一)지로 담근 된장보다 효소력(酵素力)이 강(强)한 배합고일(一)지로 담근 된장이단백질분해력(蛋白質分解力)와 환원당생성(還元糖生成)이 더 빠르며 많았다. 3) 국균(麴菌)의 당화력(糖化力). ${\alpha}-Amylase$력(力), Protease활성(活性)의 식염(食鹽)에 의(依)한 영향을 시험한 결과 3자(三子)가 각각 다른 정도오 억제(抑制)되는것을 알았다.

• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.89-94
• /
• 2014

탄소나노튜브는 우수한 기계적 특성으로 인해 주목받고 있으며, 다양한 산업 분야로의 잠재적 활용성을 갖는 고강도/고강성의 나노복합재료를 설계/제작하기 위한 다양한 연구가 이루어 지고 있다. 본 논문에서는 다중벽 탄소나노튜브를 이용한 강화 복합재료를 효과적으로 설계하고, 기계적 물성을 예측/평가하기 위한 미시역학적 해석 방법 연구를 수행하였다. 이를 위해 먼저 대표체적요소 모델을 설계하고 이를 이용한 유한요소 해석을 통해서 강화 복합재료의 기계적 물성을 평가하였다. 특히 MWCNT 의 각 형상인자에 따른 복합재료의 탄성계수 변화를 예측하고, 각 인자들의 영향을 정성적으로 평가하였다. 더불어 형상인자들의 복합적 조건에서의 탄성계수에 대한 영향 평가도 수행하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.225-225
• /
• 2013

Nanostructured noble metals have been attractive for their unusual optical properties and are widely utilized for various purposes. The optical properties mainly originating from collective electron oscillation can assist direct energy conversion via surface plasmon resonances. Here, we investigated the effect of surface plasmons of silver nanowires on the generation of hot electrons. It is reported that the surface plasmons of silver nanowires exhibit longitudinal and transverse modes, depending on the aspect ratio of the nanowires. In order to measure the hot electron flow through the metallic nanowires, chemically modified Au/TiO2 Schottky diodes were employed as the electric contact. The silver nanowires were deposited on a Au metal layer via the spray method to control uniformity and the amount of silver nanowire deposited. We measured the hot electron flow generated by photon absorption on the silver nanowires deposited on the Au/TiO2 Schottky diodes. The incident photon-to-current efficiency was measured a function of the photon energy, revealing two polarization modes of siliver nanowires: transverse and longitudinal modes. UV-Vis spectra exhibited two polarization modes, which are also consistent with the photocurrent measurements. Good correlation between the IPCE and UV-vis measurements suggests that hot electron measurement on nanowires on nanodiodes is a useful way to reveal the intrinsic properties of surface plasmons of nanowires.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.19-23
• /
• 2013

Ru films were successfully prepared by plasma-enhanced atomic layer deposition (PEALD) using $Ru(EtCp)_2$ and $NH_3$ plasma. To optimize Ru PEALD process, the effect of growth temperature, $NH_3$ plasma power and $NH_3$ plasma time on the growth rate and preferred orientation of the deposited film was systemically investigated. At a growth temperature of $270^{\circ}C$ and $NH_3$ plasma power of 100W, the saturated growth rate of 0.038 nm/cycle was obtained on the flat $SiO_2$/Si substrate when the $Ru(EtCp)_2$ and $NH_3$ plasma time was 7 and 10 sec, respectively. When the growth temperature was decreased, however, an increased $NH_3$ plasma time was required to obtain a saturated growth rate of 0.038 nm/cycle. Also, $NH_3$ plasma power higher than 40 W was required to obtain a saturated growth rate of 0.038 nm/cycle even at a growth temperature of $270^{\circ}C$. However, (002) preferred orientation of Ru film was only observed at higher plasma power than 100W. Moreover, the saturation condition obtained on the flat $SiO_2$/Si substrate resulted in poor step coverage of Ru on the trench pattern with an aspect ratio of 8:1, and longer $NH_3$ plasma time improved the step coverage.

• 한국강구조학회 논문집
• /
• 제12권1호통권44호
• /
• pp.17-28
• /
• 2000

현재 현장에서 건설되어지는 콘크리트교량의 바닥판은 상부와 하부에 동일한 철근을 배근한다. 바닥판 상부철근의 부분적인 제거는 구조적인 측면에서 볼 때, 안전성을 위협하지 않는다는 경험적인 연구 결과들이 발표되어왔다. 판이론에 근거하여 강판형교의 3거더와 4거더시 바닥판의 구조적인 거동을 수식적으로 표현하는 간략화 된 방법을 유도하였다. 거더간 상대처짐을 고려한 간략화 된 방법은 유한요소해석의 결과치와 유사한 값을 얻을 수 있었다. 본 연구에서는, 바닥판 슬래브의 새로운 설계개념이 간략화 된 방법을 통해서 제안되었다. 간략화 된 방법의 변수는 하중위치, 형상비, 상대강성비 그리고 지간 길이 등을 선정하였다. 이 새로운 설계접근방법은 바닥판 상부 철근량을 감소시켜줄 것이다. 바닥판 상부 철근량의 감소는 건설비용의 감소와 철근의 부식문제를 최소화 시켜줄 수 있을 것이다.

• 한국재료학회지
• /
• 제20권7호
• /
• pp.370-373
• /
• 2010

In fabricating plasma display panels, the photolithographic process is used to form patterns of barrier ribs with high accuracy and high aspect ratio. It is important in the photolithographic process to control the refractive index of the photosensitive paste. The composition of this paste for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system, including additives of alkali oxides and rare earth oxides. In this work, we investigated the density, structure and refractive index of glasses based on the $B_2O_3-SiO_2-Al_2O_3$ system with the addition of $Li_2O$, $K_2O$, $Na_2O$, CaO, SrO, and MgO. The refractive index of the glasses containing K2O, Na2O and CaO was similar to that of the [BO3] fraction while that of the SrO, MgO and Li2O containing glasses were not correlated with the coordination fraction. The coordination number of the boron atoms was measured by MAS NMR. The refractive index increased with a decrease of molar volume due to the increase in the number of non-bridging oxygen atoms and the polarizability. The lowest refractive index (1.485) in this study was that of the $B_2O_3-SiO_2-Al_2O_3-K_2O$ glass system due to the larger ionic radius of $K^+$. Based on our results, it has been determined that the refractive index of the $B_2O_3-SiO_2-Al_2O_3$ system should be controlled by the addition of alkali oxides and alkali earth oxides for proper formation of the photosensitive paste.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.73-79
• /
• 2009

This present paper investigated the mechanical properties and the microstructures of each penetration shapes classifying the conduction shape area and the keyhole shape area about electron beam welded 120(T)mm thick plated aluminum 5052 112H. As a result the penetration depth is increased linearly according to the output power, but the aspect ratio is decreased after the regular output power. In the conduction shape area, the Heat affected zone is observed relatively wider than the keyhole shape area. In the material front surface of the welded specimen, the width is decreased but the width in the material rear surface is increased. After the measuring the Micro Vikers Hardness, it showed almost similar hardness range in all parts, and after testing the tensile strength, the ultimate tensile strength is similar to the ultimate tensile strength of the base material in all the specimens, also the fracture point was generated in the base materials of all the samples. In the result of the impact test, impact absorbed energy of the Keyhole shape area is turned up very high, and also shown up the effect about four times of fracture toughness comparing the base material. In the last result of observing the fractographs, typical ductile fraction is shown in each weld metal, and in the basic material, the dimple fraction is shown. The weld metals are shown that there are no other developments of any new chemical compound during the fastness melting and solidification.

• 경영과정보연구
• /
• 제35권3호
• /
• pp.273-287
• /
• 2016

본 연구는 정보화 교육이 농업법인회사에 미치는 영향을 밝히는데 목적을 두었다. 이를 위해, 본 연구는 농림수산식품교육문화정보원에서 실시한 정보화수준 및 활용도 조사 보고서를 이용하여 구조방정식 모델 분석을 실시하였다. 연구결과, 정보화 교육은 소셜네트워크서비스(Social Network Services, SNS)를 활용하는 업무의 비율과 정보통신융합기술(Information and Communications Technologies, ICT)을 통해 축적된 데이터를 사용하는 업무의 비율에 긍정적인 영향을 주었다. 특히, ICT 정보시스템 활용은 조직 내 업무 효율성을 높이는 것으로 나타났다. 그리고 결국, 업무 효율성은 농업 경영 조직의 업무 효과성을 증대시키는 것을 확인하였다. 따라서 농업분야에 대한 정보화 교육은 ICT를 활용한 정보시스템 교육을 중점으로 하여 이뤄져야 할 것이다.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.379-385
• /
• 1999

Minute boehmite crystals with high aspect rations, which were hydrothermally synthesized from gibbsite in $Ba(OH)_2$ solution, occluded Ba with the Ba/Al molar ratio of about 0.03 in their interlayers. Their surface areas were about 14$\m^2$/g. The Ba-intercalated bohemite samples were partly used for producing $BaAl_{12}O){19}$ with low sinterability by externally supplementing $Ba(OH)_2$, and for forming transient aluminas. The surface area of $BaAl_{12}O){19}$ obtained by firing at $1500^{\circ}C$ for 3 h was 5.3$\m^2$/g, which was significantly lower than 12$\m^2$/g of the sol-gel origin. While a mixture ${\gamma}$-alumina and BaO is known to from $BaAl_{12}O){19}$ at $1200^{\circ}C$, solid state reaction between η-alumina transformed from the Ba-intercalated boehmite and BaO formed from $Ba(OH)_2$ deposited on the boehmite started above $1300^{\circ}C$. This suggests that large sized $Ba^{2+}$ ion occluded in η-alumina considerably suppresses the diffusion of $Al^{3+}$ ion. The surface area of the Ba-intercalated boehmite fired at $1400^{\circ}C$ for 3h was as high as 14$\m^2$/g indicative of its potential applicability to combustion catalysts. But it was decreased to 5.0$\m^2$/g after firing at $1500^{\circ}C$ for 3 h, accompanied by abrupt formations of $\alpha$-alumina and $BaAl_{12}O){19}$ as main products. The suppression of $\alpha$-alumina formation up to $1400^{\circ}C$ also suggests the significant blocking effect of $Ba^{2+}$ ion on the diffusion of the component ions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.51-51
• /
• 2008

Carbon nanotubes (CNTs) have long been reported as an ideal material due to their excellent electrical conductivity and chemical and mechanical stability as well as their high aspect ratios for field emission devices. CNT emitters made by screen printing the organic binder-based CNT paste may act as a source to release gases inside a vacuum panel. These residual gases may cause a catastrophic damage by electrical arcing or ion bombardment to the vacuum microelectronic devices and may change their physical or electrical properties by adsorbing on the CNT emitter surface. In this study, we analyzed the composition of residual gases inside the vacuum-sealed panel by residual gas analyzer (RGA), investigating the effects of individual gases of different kinds at several pressures on the field emission characteristics of CNT emitters. The residual gases included $H_2$, CO, $CO_2$, $N_2$, $CH_4$, $H_2O$, $C_2H_6$, and Ar. Effect of residual gases on the field emission was studied by observing the variation of the pulse voltages with the duty ratio of3.3% to keep the constant emission current of $28{\mu}A$. Each gas species was introduced to a vacuum chamber up to three different pressures ($5\times10^{-7}$, $5\times10^{-6}$, and $5\times10^{-5}$ torr) each for 1 h while electron emission was continued. The three different pressure regions were separated by keeping a high vacuum of $\sim10^{-8}$ torr for a 1 h. The emission was terminated 6 h after the third gas exposure was completed. Field emission characteristics under residual gases will be discussed in terms of their adsorption and desorption on the surface of CNTs and the resultant change of work function.