• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.327-329
• /
• 2023

In this study, an experiment was conducted to investigate the effect of the concentrations of tryptone, an organic nitrogen supplement, and sodium tungstate on the growth of microbial and the production of acetic acid and ethanol in the culture of Clostridium ljungdahlii. Microbial growth increased by 144.6%, and ethanol and acetic acid production improved by 8.6% and 36.7%, respectively, when 2.5 g/L of tryptone was added to the medium of the control experiment (0 g/L tryptone). In the experiment with 1 µM Na₂WO₄·2H₂O, which is 100 times higher than the condition of the medium used in the control experiment (0.01 µM Na₂WO₄·2H₂O), there was no significant difference in microbial growth or total production of C2 metabolites, but ethanol production increased and acetic acid production decreased. As a result, the ethanol/acetic acid production ratio increased significantly from 0.24 in the control experiment to 0.56.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2008

The effects of $TiO_2$ contents and UV irradiation treatment on the surface properties of PLA films embedded with $TiO_2$ nanoparticle were investigated. Whereas UV irradiation decreased reflectance of the treated PLA films proportionally with increasing UV energy, the reflectance of PLA/$TiO_2$ films increased with increasing UV energy. The UV irradiation treatment caused PLA/$TiO_2$ blend films more polar as indicated in the generation of new carbonyl group and decrease in zeta potentials, which was more pronounced with the introduction of $TiO_2$. Upon UV irradiation, $TiO_2$ particles appeared on the film surface as observed in SEM images. The PLA/$TiO_2$ blend films showed photocatalytic properties such as photobleaching of methylene blue, deodorization of ammonia and antimicrobial activity in comparison with pure PLA films.

• Journal of the Korean Ceramic Society
• /
• v.45 no.6
• /
• pp.345-349
• /
• 2008

$TiO_2$ coating ceramic tile for self-cleaning purpose was prepared by the precipitant dropping method using $TiCl_4$ as a precursor. $TiO_2$ film was formed on the ceramic tile by spray-coating technique and heat-treated at $500^{\circ}C$ for 1 h. The size and crystalline structure of $TiO_2$ particles were 15.3 nm and anatase phase. The outdoor exposure tests were conducted and the effects of outdoor exposure test conditions, such as exhaust concentration of contamination materials (test places), the UV light intensity (irradiation direction) and coating amounts of $TiO_2$ on the self-cleaning properties were investigated by the brightness measurements. As a results, self-cleaning property of $TiO_2$ coating tile was affected by the coating amount of $TiO_2$ however, not affected by the UV light intensity included in sun's ray (irradiation direction). $TiO_2$ coating ceramic tile can be utilized for exterior finishing materials because of self-cleaning property of $TiO_2$ coating tile.

• Journal of Surface Science and Engineering
• /
• v.53 no.1
• /
• pp.22-28
• /
• 2020

In this study, manganese dioxide (MnO₂) nanoparticles were synthesized from KMnO₄ and MnCl₂·4H₂O without any dispersing agents and oxidant via ultra-high pressure homogenization process. We investigated various physicochemical properties and CO oxidation reactions of the MnO₂ nanoparticles as a function of the number of passes at 1,500 bar in a high pressure homogenizer nozzle. The observed X-ray diffraction patterns and scanning electron microscopy images revealed that the synthesized MnO₂ nanoparticles had a hexagonal structure and a uniform spherical shape. It was found from the Brunauer-Emmett-Teller measurements that the pore size of the MnO₂ nanoparticles ranged from 23.6 to 7.2 nm and their specific surface area ranged from 24 to 208 m²g^-1. In particular, it was confirmed from the measurements of CO conversion into CO₂ that CO oxidation reaction over the MnO₂ nanoparticles exhibited excellent catalytic activity at low temperatures below 100℃.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.483-488
• /
• 2007

The influence of $P_2O_5$ on clinker mineral composition and the cement quality was investigated. When the sewage sludge was used as a raw material in place of clay, the presence of $P_2O_5$ in sewage sludge affects the mineral composition and the clinker quality. As the $P_2O_5$ concentration in raw mix increases, the burnability of clinker becomes worse and the alite decomposes into belite and free-CaO, so belite increases with the decrease of alite. The early strength of mortar decreases with the increase of $P_2O_5$ concentration. On the other hand, later-age strength increases with the increase of belite content. The setting time of cement was delayed with the $P_2O_5$ concentration above 0.6 wt%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.6
• /
• pp.495-500
• /
• 2009

The ceramic($BaTiO_3$)-polymer(epoxy) composites have been widely investigated as dielectric materials for embedded capacitors in printed circuit boards (PCBs). The dielectric properties of $BaTiO_3$/epoxy composites prepared using the agglomerated $BaTiO_3$ particles were investigated in the present study. The dielectric constants of the composites prepared using the agglomerated $BaTiO_3$ particles were about 2 times higher than those of the composites with the dispersed $BaTiO_3$ particles. The insulation resistance of the composites prepared using the agglomerated $BaTiO_3$ particles were lower than those of the composites with dispersed $BaTiO_3$ particles. As a result, there is tradeoff between high dielectric constant and insulation resistance in the $BaTiO_3$/epoxy composites. So it is important to select proper agglomerated or dispersed $BaTiO_3$ particles in accordance with needs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.365-371
• /
• 2019

In this study, the flame temperature distribution of the diffusion flame burner for SiO₂ deposition was analyzed by the computational fluid analysis. This corresponds to the previous step for simulating the SiO₂ preform deposition process for manufacturing optical fibers using environmentally friendly raw materials. In order to model premixed combustion, heat flow, convection, and chemical reactions were considered, and Reynolds-averaged Navier-Stokes equations and k-ω models were used. As a result, the temperature distribution of the flame showed a tendency to increase the distance from the nozzle surface to the maximum temperature when the flow rate of the auxiliary oxygen increased. In addition, it was confirmed that the temperature distribution due to incomplete combustion was large in the combustion reaction with a large equivalence ratio of the mixed gas.

• Journal of Hydrogen and New Energy
• /
• v.22 no.6
• /
• pp.905-912
• /
• 2011

In this study, the novel concept catalytic reactor was designed for water-gas shift reaction (WGS) under high pressure. The novel concept catalytic reactor was composed of an autoclave, the catalyst, and liquid water. Cu-ZnO/$Al_2O_3$ as the low temperature shift catalyst was used for WGS reaction. WGS in the novel concept catalytic reactor was carried out at the ranges of 150~$250^{\circ}C$ and 30~50 atm. The liquid water was filled at the bottom of the autoclave catalytic reactor and the catalyst of pellet type was located at the gas-liquid water interface. It was concluded that WGS reaction occurred over the surface of catalysts partially wetted with liquid water. The conversion of CO for WGS was also controlled with changing content of Cu and ZnO used as the catalytic active components. Meanwhile, the catalyst of honey comb type coated with Cu-ZnO/$Al_2O_3$ was used in order to increase the contact area between wet-surface of catalyst and the reactants of gas phase. It was confirmed from these experiments that $H_2$/CO ratio of the simulated coal gas increased from 0.5 to 0.8 by WGS at gas-liquid water interface over the wet surface of honey comb type catalyst at $250^{\circ}C$ and 50 atm.

• Clean Technology
• /
• v.24 no.4
• /
• pp.280-286
• /
• 2018

In this study, the adsorption performance of vapor phase VOCs under dry conditions was evaluated by using two metal oxides, $TiO_2$ powder and $Al_2O_3$ powder. BET analysis and ammonia in-situ FT-IR analysis were used to analyze specific surface area and surface acid site. As a result, $TiO_2$ powder and $Al_2O_3$ powder had a specific surface area of $317.6m^2\;g^{-1}$ and $64m^2\;g^{-1}$, respectively. In the case of $TiO_2$ powder, many acid sites were observed on the surface. As a result of evaluating the vapor phase VOCs adsorption performance using two metal oxide powders, $TiO_2$ powder having a relatively large specific surface area and a large number of acid sites exhibited relatively good adsorption performance. In particular, it is considered that the specific surface area directly affects the adsorption performance, and further study on the effect of the acid site is required. Based on the $TiO_2$ exhibited excellent adsorption performance, it manufactured into various forms of honeycomb, hollow fiber and disc. As a result, the adsorption performance was lower than that of the powder, but it is advantageous in view of applicability. In addition, it was confirmed that the disc adsorbent having excellent thermal durability due to the characteristics of the manufacturing process stably maintains adsorption performance even at a high temperature desorption process several times.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1921-1924
• /
• 2011

Nitrile-forming eliminations from $(E)-2,4,6-(NO_2)_3C_6H_2CH=NOC_6H_4-2-X-4-NO_2$ (1) promoted by $R_3NH/R_3NH^+$ in 70 mol % MeCN(aq) have been studied kinetically. When X = $NO_2$, the reactions exhibited second-order kinetics as well as Br$\"{o}$nsted ${\beta}$ = 0.63 and ${\mid}{\beta}_{lg}{\mid}$ = 0.34-0.46, and an E2 mechanism is evident. As the leaving group was made poorer (X = H, Cl, and $CF_3$), Br$\"{o}$nsted ${\beta}$ value increased from 0.63 to 0.85-0.89 without much change in the ${\mid}{\beta}_{lg}{\mid}$ value E2, indicating that structure of the transition state changed to an E1cb-like with extensive $C_{\beta}-H$ bond cleavage, significant negative charge development at the ${\beta}$-carbon, and limited $C_{\alpha}$-OAr bond cleavage.