• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.155-160
• /
• 2001

KS-code(KS B 0896) for nondestructive ultrasonic testing classifies the quality level by relative flaw size only. But flaw position is more important than the flaw size. Test blocks having artificial holes near surface show lower yield load than the blocks having deeply located holes from the surface. So, level calibration table was proposed for classifying the quality level of welded steel structures.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.1-8
• /
• 2016

목재 데크재에 인위적인 결함인 구멍을 부여하고 이들의 성능평가를 위해 초음파 비파괴 시험법을 적용하였다. 구멍의 크기와 개수를 달리하여 각각에 대한 초음파 전달속도를 측정하고 탄성계수를 산정하여 그 영향을 비교분석하였다. 시험결과 구멍의 크기가 커짐에 따라 초음파 전달속도와 탄성계수는 감소하였으며 이들 상호간에는 직선상관관계를 보였다. 구멍의 크기가 증가하면 초음파의 전달 길이는 증가하며 이에 따라 초음파속도는 감소하였지만 구멍의 크기가 15 mm 이하로 작은 경우에는 구멍이 없는 부재에 비해 그 차이가 작게 나타났다. 구멍의 개수가 많아짐에 따라 초음파 전달속도와 탄성계수는 감소하였으며 이들 상호간에는 높은 직선상관관계를 보였다. 구멍의 개수가 3개인 경우 초음파속도는 약 3.5% 정도 감소한데 비하여 탄성계수는 27% 정도로 현저히 감소하여 더 큰 감소경향을 나타내었다. 이들의 결과로부터 구멍의 크기와 개수는 초음파 전달속도와 탄성계수에 영향을 미치며 구멍의 크기가 크고 개수가 많아질수록 그 영향은 더욱 커질 것으로 여겨진다. 또한 작은 결함의 탐지를 위해서는 초음파 전달속도에만 의지할 것이 아니라 여러 초음파 변수를 고려하여 적용하는 방법을 고려하여야 할 것으로 생각된다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.88-88
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.36-36
• /
• 2009

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권1호
• /
• pp.1-6
• /
• 2020

This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y₂O₃, BaCO₃ and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.

• 한국의류산업학회지
• /
• 제7권5호
• /
• pp.472-480
• /
• 2005

It was proved the practical use of the unique traditional Korean paper through the previous researches. The purpose of this study was to suggest the adequate application which is making various applied patterns in the fashion products so as to contribute to textile, fashion, and Korean paper industry. Six kinds of vests with the same fashion material using the Korean traditional paper were manufactured in order to investigate the images of materials in case of wearing them on the actual human bodies. As the results of image assessment for the materials and the factor analysis, 'classical', 'natural', 'Korean traditional', 'rural' and 'luxury' images were presented as the representative image of the Korean traditional paper material. Making repeated patterns of stripes and zigzag by sewing-machine stitches showed the natural effect on Korean traditional paper. Well-matched harmony was shown between holes made by the needle in sewing and slits torn by the tension to the needle and the thread. Especially, transparency by irregular holes formed by artificial frictional washing could shown special formative arts harmoniously with semi-transparency of Korea traditional paper and touch of sewing yarn. After the unripe persimmon dyeing, holes made by the needle became more hard and tight. The changes were no longer shown by the artificial frictional washing and then fixed. As the result of applying the Korean traditional paper fashion materials with various patterns for the basic formed garments, it was shown that the common and simple garments were changed the garments with special formation which could be found on the art garments due to the creative touch and formative arts using the Korea traditional paper fashion material. A variety of formative application by means of the developed samples was suggested to enlarge the practicality. As the result of this study, it was discovered that the possibility and application of fashion goods through the developed samples made of Korean traditional paper.

• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.1-9
• /
• 2016

In recent years, urban areas occurred several times a sinkhole. In Korea, this limestone area where the sink hole sink holes occur based on not much was seen as a very rare phenomenon. However, the occurrence of accidents in recent Subsidence and urban areas is occurring in the limestone sinkhole may yet see another one called artificial Subsidence phenomenon. Subsidence in urban areas can have various causes, such as depression groundwater level changes due to the influence of soil, underground, etc. underground utilities by anthropogenic actions. But a lot of research on natural sinkhole by geological experts continued steadily since the past Subsidence that occurred in recent years the city has become an urgent problem to formulate a countermeasure to be very concerned about the human and material damage. In this study, the city by analyzing existing research on the causes and countermeasures of Subsidence recently released look at the announced sinkhole, published statistics and cases of Subsidence data, and overseas corresponding practices in each relevant agencies and to suggest measures for local Subsidence.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.113-119
• /
• 2013

We developed a transformed, symmetrical, mushroom-like surface without via holes in cells focused on a 2.4-GHz WLAN band. Each slot in the novel type structure plays a key role in modeling at the desired frequencies. The designed artificial magnetic conductor (AMC) has several advantages, including a small size, a wider bandwidth, a short reflecting distance to the antenna, and easy fabrication because there are no via holes. Overall dimensions of the AMC cell are 21 mm $(Width){\times}21mm$ $(Height){\times}2.6mm$ (Thickness), and the bandwidth is about three times wider (11.7%) compared to that of a conventional AMC (4.0%). For evaluating the performance of the proposed structure, a reflector, which periodically consists of the designed AMC cells, was developed. The antenna with the investigated AMC reflector not only works within a quarter of the wavelength because of the extremely high wave impedance generated by the AMC cells on the surface of the structure but also reduces the specific absorption rate (SAR). Electromagnetic field (EMF) exposure to a human phantom was analyzed by applying the designed reflector to the 2.4-GHz dipole antenna in a tablet PC. The calculated peak SAR averaged over 1 g was 0.125 W/kg when the input power was 1 W and the antenna was located at 20 cm from the human phantom. However, the SAR value was only 0.002 W/kg (i.e., 98.4% blocked) when the designed reflector was inserted in front of the antenna.

• 오토저널
• /
• 제11권1호
• /
• pp.51-56
• /
• 1989

This study was performed to investigate the effect of defect on fatigue strength under the stress of rotary bending. The specimens were made of low carbon steel having artificial microholes, namely, single micro-hole and two adjacent micro-holes as natural defects, and the effects of the diameter of hole and the distance between the holes on fatigue strength have been investigated. The obtained result can be summarized as follows: 1, The critical defect means the largest size of defect that does not affect fatigue limit, and correspondes to the size of defect leading to final fracture under fatigue limit of smooth specimen. The size of defect which has an effect on fatigue limit is larger than that of critical defect. 2, The defect larger than the critical defect affects fatigue strength for as a kind of size effect, and the physical meaning of size effect of defect is considered same as the one of notch effect.

• 터널과지하공간
• /
• 제28권6호
• /
• pp.692-705
• /
• 2018

발파를 이용한 터널의 굴착 시 수반되는 가장 큰 문제 중 하나는 발파 시 발생하는 지반진동으로 이를 저감시키기 위한 노력의 일환으로 와이어쏘 장비를 이용하여 터널 심발공 주변에 인공 자유면을 형성하고 이를 통해 파쇄도를 향상시키며 동시에 발파 진동을 저감시키는 기술이 개발되어 오고 있다. 본 연구에서는, 실규모 발파 실험 및 3D-DFPA 해석 기법을 통해 인공 자유면의 구조조건에 따른 진동저감 및 발파 효과에 대한 고찰을 수행하였으며, 이에 더불어 인공 자유면 발파에서의 효율적 설계를 위한 경험적 기준을 제안하였다. 분석 결과, 인공 슬롯 자유면은 홉킨슨 효과에 의한 스폴파괴 유발 및 충격진동의 전파경로 차단 등 발파 진동 저감을 야기하는 것으로 판단되었으며, 인공 자유면이 존재하는 경우, 존재하지 않는 경우에 비해 파쇄체적 및 파쇄효율이 모두 증가하는 경향을 보였다. 이는 인공 자유면이 실제 자유면과 동일한 역할을 수행함에 따라 최소저항선의 감소효과를 야기하는 것으로 판단되었으며, 실험 결과를 토대로 발파 공경 및 최소저항선에 대한 발파 파쇄체적의 상관관계를 도출 및 경험적 설계 기준을 제안하였다. 결론적으로, 인공 자유면 발파를 수행 시 발파 공경 대 최소저항선의 비가 약 5에서 8사이의 값을 갖도록 설계하는 것이 가장 이상적인 표준발파 조건에서의 파쇄효과를 기대할 수 있을 것으로 판단되었다.