• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.722-732
• /
• 2014

The power-voltage (P-V) curve of photovoltaic (PV) arrays connected in parallel to bypass diodes would have several local maximum power points (LMPP) under partial shading conditions (PSC). Conventional maximum power point tracking (MPPT) methods fail to search for the global maximum power point (MPP) because the searched peak point may remain at the LMPP on the P-V curve under PSC. This study proposes an improved MPPT algorithm to ensure that PV arrays operate at global maximum power point (GMPP) under PSC. The proposed algorithm is based on a critical study and a series of observations of PV characteristics under PSC. Results show the regularity of voltage interval between LMPPs. The algorithm has the advantages of rapidly reaching GMPP, maintaining stability, and recovering GMPP quickly when the operating condition changes. Simulation and experimental results demonstrate the feasibility of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.685-688
• /
• 2003

In this paper, a performance comparison between two blind signal estimation algorithms in a LTI channel is considered. The two algorithms, Iterative Least-Squares with Projection (ILSP) and a modified ILSP, are based on the finite-alphabet property of input symbols. This case typically arises in a multiple access system with a sensor array antenna at the receiving end. We start with the formulation of a maximum-likelihood (ML) estimation problem under an additive white Gaussian noise assumption. A blind ML estimator is derived with its iterative algorithm for calculation. Then we narrow down the consideration of this problem to QPSK case so that a modified algorithm is proposed for $\pi$/4-QPSK case. The modified version is compared with the original ILSP algorithm in terms of the rate of the convergence to global minima. A computer simulation shows that the modified algorithm gives a better performance. This result implies that the performance of the blind separation algorithms may be greatly improved by adopting a smart coding scheme with rich structure.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.5
• /
• pp.324-329
• /
• 2015

A decreased number of readout method is investigated to provide precise pixel information for small-animal positron emission tomography (PET). Small-animal PET consists of eight modules, and each module is composed of a $6{\times}6$ array of $2{\times}2{\times}20mm^3$ lutetium yttrium orthosilicate (LYSO) crystals optically coupled to a $4{\times}4$ array of $3{\times}3mm^2$ silicon photomultipliers (SiPMs). The number of readout channels is reduced by one-quarter that of the conventional method by applying a simplified row and column matrix algorithm. The performance of the PET system and detector module was evaluated with Geant4 Application for Emission Tomography (GATE) 6.1 and DETECT2000 simulations. In the results, all pixels of the $6{\times}6$ LYSO array were decoded well, and the spatial resolution and sensitivity, respectively, of the PET system were 1.75 mm and 4.6% (@ center of field of view, energy window: 350-650 keV).

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.1
• /
• pp.30-36
• /
• 2003

Recently, mechanically beam-steering microstrip patch array antenna using MEMS technology is developed and tested. In this paper as an application of developed antenna, new radiation pattern synthesis method far beam-steering antenna without phase-shifter is proposed, and applied to synthesis of desired beam shape. Niching genetic algorithm using Restricted Competition Selection (RCS) is used for radiation pattern optimization. This approach can be applied to design of array antenna for meet EMC standard and through proposed method specific beam shapes can be synthesized.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.67-73
• /
• 2011

A method obtaining position data(x, y) of object accurately is proposed by using a pair of ultrasonic sensors composed of one transmitter and two receivers. And the driving system which controls the light of flat LED lamp locally using array of ultrasonic sensors (3 transmitters and 6 receivers) is developed. As a result, measured values of y are relatively reliable due to its small average of absolute errors of 1.03[cm]. The measured values of x have average error of 8.52[cm], and it is a large value. However, the average error is decreased by 0.65[cm] after applying algorithm for error correction. The experiments to control the light of flat LED lamp locally with algorithm for error correction are carried out. From the result, measured values of x with average error of 0.97[cm] are obtained and they are very good approximations of actual values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.250-259
• /
• 2012

This paper compared and investigated the choice of optimal algorithm affects on the directivity synthesis of linear array in the satisfaction to the design specification of the desired directivity, convergence characteristic, and adaptability. Optimal algorithms use a quasi-Newton method(DFP and BFGS method) for realizing the desired directivity, used a quasi-ideal beam, steering beam, and a multi-beam, chosen as desired directivity. In the numerical result, this paper verified the effectiveness of the quasi-Newton method to the directivity synthesis, and offered a solving approach of occurred problems in the numerical simulation process.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.772-779
• /
• 2015

This paper presents a power-efficient hardware realization for a motion estimation technique that is based on the full-search block matching algorithm (FSBMA). The considered input is the quarter common intermediate format of digital video. The mean of absolute difference (MAD) is the distortion criteria employed for the block matching process. The conventional architecture considered for the hardware realization of FSBMA is that of the shift register-based 2-D systolic array. For this architecture, a conservative approximation technique is adapted to eliminate unnecessary MAD computations involved in the block matching process. Upon introducing the technique to the conventional architecture, the power and complexity of its implantation is reduced, while the accuracy of the motion vector extracted from the block matching process is preserved. The proposed architecture is verified for its functional specifications. A performance evaluation of the proposed architecture is carried out using parameters such as power, area, operating frequency, and efficiency.

• Journal for History of Mathematics
• /
• v.31 no.6
• /
• pp.273-289
• /
• 2018

The KaiFangFa開方法 of traditional mathematics was completed in ${\ll}$JiuZhang SuanShu九章算術${\gg}$ originally, and further organized in Song宋 $Yu{\acute{a}}n$元 dinasities. The former is the ShiSuoKaiFangFa釋鎖開方法 using the coefficients of the polynomial expansion, and the latter is the ZengChengKaiFangFa增乘開方法 obtaining the solution only by some mechanical numerical manipulations. ${\ll}$SanHak JeongEui算學正義${\gg}$ basically used the latter and improved the estimate-value array by referring to the written-calculation in ${\ll}$ShuLi JingYun數理精蘊${\gg}$. As a result, ZengChengKaiFangFa was more refined so that the KaiFangFa algorithm is more consistent.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.367-373
• /
• 2016

We propose an improved direction of arrival (DoA) estimation algorithm based on co-prime array and propagator method. The propagator method with co-prime array does not require singular value decomposition (SVD) requiring much less computational complexity but exhibiting somewhat worse performance in comparison with MUSIC based on co-prime array. We notice that one cause of the performance degradation was in the avoidance of the usage of the diagonal elements of the signal autocorrelation matrix that contains the noise power spectral density. So we propose an algorithm with the diagonal elements of the signal autocorrelation matrix based on the fact that the noise power spectral density can be estimated using noise observation over a long period of time. We observe, through simulations, that the proposed scheme in this paper improves the performance, with 4 times more computational requirement, by signal-to-noise ratio of 1.5dB and by DoA resolution of $0.7^{\circ}$ at the detection probability of 95% compared with the previously introduced co-prime array propagator scheme, resulting in performance much closer to that of co-prime array-based MUSIC scheme.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.171-173
• /
• 2000

In this paper, we present a new interpolation method for the color filter away(CFA). In order to capture color images. typical input devices use a single chip CCD imaging sensor with color filter array. As a result, the single chip CCD does not provide sufficient color resolutions since it arranges different color filters sequentially on a single CCD, resulting in aliasing noise and loss of resolution. In order to reconstruct high quality color images, we propose to use the interpolation algorithm using high order B-splines. Experiments show promising results.