• 제목/요약/키워드: Array algorithm

검색결과 1,211건 처리시간 0.027초

광대역 컨포멀 배열 안테나를 위한 빔 형성 연구 및 최적 소자 위치 선정 (Beam Forming Study and Optimum Antenna Location Selection for Wideband Conformal Array Antenna)

  • 정상훈;이강인;남상욱;정용식;윤영중;유홍균;정현교
    • 한국전자파학회논문지
    • /
    • 제27권2호
    • /
    • pp.138-146
    • /
    • 2016
  • 본 논문에서는 LSM(Least Squares Method)와 GA(Genetic Algorithm)를 이용한 광대역 컨포멀 배열 안테나의 최적 빔 형성을 제안하였다. LSM을 적용하여 컨포멀 배열 안테나의 빔 패턴을 선형 배열 안테나의 빔 패턴으로 근사시키는 가중치들을 구하였다. 그리고 GA를 이용하여 광대역에서 최적의 빔 패턴을 형성하는 컨포멀 배열 안테나의 최적 위치들을 구하였다. 제안된 방법을 검증하기 위해 Bezier 플랫폼 배열 안테나에 적용시켜 보았다.

컨포멀 위상 배열 안테나의 패턴 합성에 대한 고찰 (Study on Pattern Synthesis of Conformal Phased Array Antenna)

  • 박동철;권오혁;류홍균;이규송
    • 한국전자파학회논문지
    • /
    • 제26권12호
    • /
    • pp.1031-1043
    • /
    • 2015
  • 본 논문에서는 Enhanced Adaptive Genetic Algorithm(EAGA)를 이용하여 두 가지 종류의 컨포멀 배열 안테나의 패턴 합성 과정을 기술하였다. 한 종류는 2차 함수 형태의 실린더 도체 위에 배열된 $1{\times}16$ 배열 안테나이고, 다른 종류는 2차 함수 곡선의 회전체 곡면 도체 위에 배열된 18개 소자 배열 안테나이다. 패턴 합성시 각 소자의 능동 소자 패턴을 이용하였고, 특히 회전체형 배열 안테나의 경우, 합성 시간을 크게 줄이기 위해 동심원형 평면 배열 안테나의 능동 소자 패턴을 구한 뒤 이를 변환하여 사용하였다. 제안한 합성 기법의 타당성을 검증하기 위해 MATLAB 내에서 합성된 배열 안테나의 패턴과 MWS(Microwave Studio) 내에서 구현된 배열 안테나의 패턴을 비교하였으며, 또한, $1{\times}16$ 배열 안테나의 경우는 측정 패턴과 합성 패턴도 비교하였다.

Improvement of Defect Detection in TFT-Array Panel

  • Chung, Kyo-Young
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.594-597
    • /
    • 2005
  • This paper shows that the defect detection in TFTarray panel can be improved by using newly developed software solution without adding additional hardware instruments. Some issues are reviewed in current TFT array test and new algorithm is explained for detecting more real defects without paying the penalty of reporting more false defects in TFT array test.

  • PDF

곡면 배열 트랜스듀서의 최적 설계 (Optimal Design of Conformal Array Transducers)

  • 김회용;노용래
    • 한국음향학회지
    • /
    • 제31권1호
    • /
    • pp.51-61
    • /
    • 2012
  • 본 연구에서는 등각, 등간격 및 측지선 돔 (geodesic dome)형태로 배열된 곡면 배열 트랜스듀서에 대해서, 음원 간격, 음원 개수 등과 같은 배열 구조 변수들에 따른 방사패턴의 변화 경향성을 분석하였다. 또한 그 결과를 바탕으로 통계적 기법인 다중 회귀 분석을 이용하여 부엽의 크기 및 빔 폭을 설계 변수들의 함수로 도출하였다. 나아가 최적화 기법인 GA (genetic algorithm)법을 이용하여 각 방향에 대한 빔폭이 주어진 조건을 만족하며 가장 작은 부엽의 크기를 가지도록 설계 변수들의 최적화를 수행하였다. 최적화 결과를 바탕으로 세 가지 곡면 배열 구조 가운데 곡면 배열 트랜스듀서의 최적 배열 구조로 등간격 배열구조를 선정하였다.

항재밍 3차원 GPS 배열 안테나를 위한 Mutual coupling 보상 및 재밍 방향탐지 알고리즘 (Mutual Coupling Compensation and Direction Finding for Anti-Jamming 3D GPS Antenna Array)

  • 강규식;신천식;김선우
    • 한국통신학회논문지
    • /
    • 제42권4호
    • /
    • pp.723-730
    • /
    • 2017
  • 본 논문에서는 안테나 간의 상호 결합을 고려한 온라인 보상 알고리즘을 고려하였으며, 이를 적용하기 위한 새로운 GPS(Global Positioning System)용 안테나 배열을 제안하였다. 제안한 안테나 배열 및 ULA(Uniform Linear Array), URA(Uniform Rectangular Array)에 대한 항재밍 성능 평가를 위해 복수의 재밍신호 환경에 대한 방향탐지를 환경 조건 별로 나누어서 진행하였다. 1. 상호 결합이 존재하지 않는 환경. 2. 상호 결합이 있으나 보상이 이루어지지 않는 환경. 3. 상호 결합 보상이 이루어진 환경. RMSE(Root Mean Square Error) 분석을 통해 온라인 보상 알고리즘이 작동함을 확인하고 복수의 재밍신호에서도 피크 검출이 가능함을 보였다.

PPO 알고리즘을 이용한 능동위상배열안테나 적응형 고속 보정 방법 (Adaptive Fast Calibration Method for Active Phased Array Antennas using PPO Algorithm)

  • 이성제;변기식;윤홍집
    • 전기전자학회논문지
    • /
    • 제27권4호
    • /
    • pp.636-643
    • /
    • 2023
  • 본 논문에서는 원전계 환경에서 위상배열안테나를 고속 보정하는 방법이 제안되었다. 원전계에서 수신된 전력만을 통해 각 안테나 요소를 보정하는 기존 rotating-element electric-field vector (REV) 방법을 간소화 한 최대값 보정 방법과, 각 안테나 요소가 아닌 부배열 단위로 묶어서 보정하는 방법이 제안되었다. PPO 알고리즘을 이용하여 위상배열안테나의 분포에 최적화된 파티셔닝을 찾고, 그에 따른 부배열 단위로 보정하여 기존 방법 대비 더 빠른 보정이 가능한 적응형 최대값 보정 방법이 제안 및 시뮬레이션 검증되었다. 보정이 이루어지는 동안 위상배열안테나의 이득이 더 높을 뿐 아니라, 형성되는 빔 패턴이 기존 방법보다 이상적인 빔 패턴에 더 가깝다.

센서 결함이 있는 경우 Generalized Sidelobe Canceller의 보정 알고리즘 (A Compensation Algorithm for Generalized Sidelobe Canceller in the Presence of Faulty Elements)

  • 홍우영;김병철
    • 한국통신학회논문지
    • /
    • 제21권1호
    • /
    • pp.59-66
    • /
    • 1996
  • In this paper, we present a new effective algorithm for element failure compensation of Generalized Sidelobe Canceller (GSC). While the GSC is well formulated, little works have been done on array element compensation in the presence of faulty elements. Element failure changes the problem of a linearly equally spaced array into that of an unequally spaced array. Typical research approaches have been directed at using search techniques to optimize unequally spaced arrays. The proposed algorithm matches the linear constraint conditions and the general shape of the desired beam pattern at the expense of an increase of beam-width in the overall main lobe. Numerical results are included to demonstrate the capability of compensation for various situations.

  • PDF

Unified MPPT Control Strategy for Z-Source Inverter Based Photovoltaic Power Conversion Systems

  • Thangaprakash, Sengodan
    • Journal of Power Electronics
    • /
    • 제12권1호
    • /
    • pp.172-180
    • /
    • 2012
  • Z-source inverters (ZSI) are used to realize both DC voltage boost and DC-AC inversion in single stage with a reduced number of power switching devices. A traditional MPPT control algorithm provides a shoot-through interval which should be inserted in the switching waveforms of the inverter to output the maximum power to the Z-network. At this instant, the voltage across the Z-source capacitor is equal to the output voltage of a PV array at the maximum power point (MPP). The control of the Z-source capacitor voltage beyond the MPP voltage of a PV array is not facilitated in traditional MPPT algorithms. This paper presents a unified MPPT control algorithm to simultaneously achieve MPPT as well as Z-source capacitor voltage control. Development and implementation of the proposed algorithm and a comparison with traditional results are discussed. The effectiveness of the proposed unified MPPT control strategy is implemented in Matlab/Simulink software and verified by experimental results.

System Level Simulation of CDMA Network with Adaptive Array

  • Chung, Yeong-Jee;Lee, Jae-Woo
    • 한국정보통신학회논문지
    • /
    • 제3권4호
    • /
    • pp.755-764
    • /
    • 1999
  • In this study, the system level network simulation is considered with adaptive array antenna in CDMA mobile communication system. A network simulation framework is implemented based on IS-95A/B system to consider dynamic handoff, system level network behavior, and deploying strategy into the overall CDMA mobile communication network under adaptive array algorithm. Its simulation model, such as vector channel model, adaptive beam forming antenna model, handoff model, and power control model, are described in detail with simulation block. In order to maximize SINR of received signal at antenna, maximin algorithm is particularly considered, and it is computed at each simulation snap shot with SINR based power control and handoff algorithm. Graphic user interface in this system level network simulator is also implemented to define the simulation environments and to represent simulation results on real mapping system. This paper also shows some features of simulation framework and simulation results.

  • PDF

예인형 수동소나에 적합한 전방위 표적 자동탐지 및 추적기법 성능 분석 (Performance Analysis of Omni-Directional Automatic Target Detection and Tracking for a Towed Array Passive Sonar System)

  • 서익수
    • 한국군사과학기술학회지
    • /
    • 제9권3호
    • /
    • pp.33-40
    • /
    • 2006
  • In towed array passive sonar system, sonar operators cannot detect and track the all targets simultaneously in the omni-directional area by just Operator Initiated Tracking(OIT). In this paper, omni-directional automatic target detection and tracking algorithm is described and optimize the parameters through ocean data to overcome the drawbacks of OITs. The algorithm is verified through sea trials with submarines.