• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.20-25
• /
• 2006

Low frequency towed line array with high array gain and beam resolution is a long range surveillance sensor for anti-submarine warfare. The beam characteristics is however deteriorated due to the distorted line array sensor caused by low towing speed, wind, current, and towing ship maneuvering. An adaptive beamforming method is utilized in this paper to enhance the distorted line array beam performance by estimating and compensating the nonlinear array shape. A polynomial curve fitting in the least square sense is used to estimate the array shape iteratively with the distributed heading sensors data along the array. Real time array shape estimation and nonlinear array beam calculation is applied to a very long towed line array sensor system and the beam performance is evaluated and compared to the linear beamformer for the simulation and sea trial data.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4
• /
• pp.282-287
• /
• 2004

This paper proposes the nearfield eigenvector method for array shape estimation using reference signals basted on the nearfield signal modeling. Generally. direction finding methods assume the reference signals to be plainwave. However, in case of the reference signals in nearfield, this assumption is inadequate for array shape estimation. In this paper. the nearfield reference signals are modeled. and we propose the nearfield eigenvector method. The numerical experiments indicated that the proposed method shows good performance for array shape estimation regardless of the ranges of the reference signals.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.12-16
• /
• 2001

To analyze the performance of array shape estimation techniques using auxiliary sensors, the appropriate number and the positions of auxiliary sensors are investigated. Also, a post-processing technique based on spline interpolation is proposed to improve the performance of array shape estimation. The simulation results showed that when auxiliary sensors are arranged uniformly, the performance of shape estimation is better than other arrangements of auxiliary sensors. Also, the proposed post-processing technique improved the performance of the existing shape estimation method, such as Kalman filter method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.155-162
• /
• 2016

TASS(Towed Array Sonar System) is a sonar system which tows the sensor array behind a platform. Array shape is generally assumed to be a straight line. But the array shape is often distorted by oceanic current or platform maneuvering which causes the performance loss of signal processing method like beamforming. So array shape estimation methods are needed. Typically the method based on Kalman filter using heading sensor is used. In practice, the measurement is corrupted by biases which are caused by rotation of the tow cable, varying magnetic fields and slowly varying stresses in the mechanical construction. Although they can't be calibrated but can be estimated. In this paper, we suggest the array shape estimation method based on Kalman filter compensating the sensor biases.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.886-891
• /
• 2000

In this paper, an iterative array shape estimation technique is presented, which is based on the use of the least squares polynomial fitting to the data from heading sensors. The estimated polynomial shape model is then used for calculating the hydrophone positions on the assumption that the arc distances between sensors are constant. In order to verify the applicability of the proposed algorithm, numerical simulations are performed using two types of non-linear array shapes. In addition the noise effects of heading sensors on the array shape estimation results and the performance of beamformer are also investigated.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2
• /
• pp.125-133
• /
• 2004

Most of the way shape estimation method using reference sources assume that the reference sources are in the farfield. That is, the reference sources are assumed to be far from the array. However, in applications of the array with reference sources, the reference sources are not far from the way, so that in practical ocean environments, the conventional method using farfield source model fail to estimate the positions of the hydrophones. In this paper, based on the nearfield source model, a subspace-based array shape estimation method was proposed. In the proposed method, nearfield reference source is modeled using the differential time delay at each hydrophone, and nearfield parameters are derived. Using these parameters, a subspace-based array shape estimation method that generalizes the existing farfield subspace fitting method which can work regardless of the range of the source is proposed. The Cramer-Rao lower bound for the proposed method is investigated. The results of the numerical experiments indicate that the proposed method performs well in estimating the shape of a perturbed way regardless of the ranges of the reference sources.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.74-80
• /
• 2001

Because of ocean waves, swell, steering corrections, etc, the hydrophones of a towed array will not live along a straight line. However the degradation of bearing estimation performance occurs when beamforming is carried out on the hydrophone outputs of an acoustic towed array which is not straight. So it is required to estimate the shape of the array for the improved beamformer output. In this paper, an iterative array shape estimation technique is presented, which is based on the use of the least squares polynomial fitting to the data from heading sensors. The estimation error and the influence of deformations on the performance of the conventional beamformer output are investigated. Finally, the suggested method is applied to the real system in order to investigate the applicability.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.72-76
• /
• 2000

A calibration technique is proposed to improve the performance of 2-D towed array shape estimation using the Kalman filter. In the case of using displacement sensors, 2-D hydrophone positions estimated by the Kalman filter are calculated by assuming that the adjacent hydrophones are horizontally equi-spaced so that maximum distance is equal to the array length. The assumption causes errors in estimating hydrophone positions. The proposed technique using linear model approximation or spline interpolation can reduce the errors by exploiting the fact that the whole length of array is preserved whatever the array shape is. The numerical experiments show that the proposed method is very effective.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.478-484
• /
• 2002

Linear towed arrays (LTA) have a nonlinear shape due to tow vessel motion, ocean swells and currents. By reasons of nominally linear shape, various towed array shape estimation techniques have been developed since the perturbed shape cause the error in target detection. In this paper,, we propose the beamforming method for the perturbed LTA with simple structure. The proposed method linearizes a nonlinear phase of steering vector with position information measured by two reference sensors. It can be proved using some properties of Markov transition matrix, and iteration number of linearization process is decided by variance of cross phase difference. As a result of computer simulation in the ocean environment, beampattern of the proposed method is almost same with the ideal case in my type of array shape. In the signal-to-noise ratio (SNR) performance simlation, the DOA estimation performance of the proposed beamforming method is evaluated, and the comparison with Bartlett beamformer of the LTA shows that the proposed method can estimate. the spatial characteristic of sources more accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.255-262
• /
• 2020

In modern passive sonar systems, a towed array sensor is used to minimize the effects of own ship noise and to get a higher SNR. The thin and long towed array sensor can be guided in a non-linear form according to the maneuvering of tow-ship. If this change of the array shape is not considered, the performance of beamformer may deteriorate. In order to properly beamform the elements in the array, an accurate estimate of the array shape is required. Various techniques exist for estimating the shape of the linear array. In the case of a method using a heading sensor, the estimation performance may be degraded due to the effect of heading sensor noise. As means of removing this potential error, weighted polynomial fitting technique for estimating array shape is developed here. In order to evaluate the performance of proposed method, we conducted computer simulation. From the experiments, it was confirmed that the proposed method is more robust to noise than the conventional method.