• 제목/요약/키워드: Array Analysis

검색결과 2,199건 처리시간 0.027초

수중 운동체용 희소 평면배열 센서의 최적 설계 (Optimal design of a sparse planar array sensor for underwater vehicles)

  • 무하마드 샤킬 아프잘;노용래
    • 한국음향학회지
    • /
    • 제37권1호
    • /
    • pp.53-59
    • /
    • 2018
  • 본 연구에서는 수중 희소배열 센서의 구조를 최적설계하기 위한 새로운 방안을 개발하였다. 본 연구의 목적은 전체 배열센서와 대등한 성능을 가지는 희소 배열센서의 구조를 설계하는 것이다. 우선 희소 평면배열 센서의 지향계수를 배열 구조변수들의 함수로 유도하였다. 유도된 식을 사용하여 희소 배열센서 구성 소자의 개수와 위치를 최적화함으로써 그 성능이 전체 배열 센서의 성능과 대등하도록 희소배열 센서의 구조를 설계하였다. 설계된 희소 배열센서는 최대 부엽 레벨과 주엽의 빔폭 면에서 전체 배열 센서와 대등한 빔 패턴을 보였는데, 이로써 본 연구의 최적설계 기법의 효용성이 확인되었다. 나아가 수식에 의한 빔 패턴 해석 결과의 타당성은 최적화된 희소배열 구조에 대한 유한요소해석 결과와 비교함으로써 검증하였다.

Electrical Design of a Solar Array for LEO Satellites

  • Park, Heesung;Cha, Hanju
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제17권3호
    • /
    • pp.401-408
    • /
    • 2016
  • During daylight, the solar array of low earth orbit satellites harvests electrical power to operate satellites. The power conversion of the solar array is carried out by control of the operation point using the solar array regulator when the solar array faces the sunlight. Thus, the design of the solar array should comply with not only the power requirement of satellite system but also the input voltage requirement of the solar array regulator. In this paper, the design requirements of the solar array for low earth orbit satellites are defined, and the means of satisfying these requirements are described. In addition, the architecture of a multi-distributed interface is suggested to maximize the power harvested from a solar array having high temperature deviation between each panel. The power analysis in this paper shows the optimal number of multi-distributed interfaces with a converter.

ANALYSIS OF SPATIAL AND TEMPORAL ADAPTIVE PROCESSING FOR GNSS INTERFERENCE MITIGATION

  • Chang, Chung-Liang;Juang, Jyh-Ching
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
    • /
    • pp.143-148
    • /
    • 2006
  • The goal of this paper is to analyze, through simulations and experiments, GNSS interference mitigation performance under various types of antenna structures against wideband and narrowband interferences using spatial-temporal adaptive signal processing (STAP) techniques. The STAP approach, which combines spatial and temporal processing, is a viable means of GNSS array signal processing that enhancing the desired signal quality and providing protection against interference. In this paper, we consider four types of 3D antenna array structure - Uniform Linear Array (ULA), Uniform Rectangular Array (URA), Uniform Circular Array (UCA), and the Single-Ring Cylindrical Array (SRCA) under an interference environment. Analytical evaluation and simulations are performed to investigate the system performance. This is followed by simulation GPS orbits in interfered environment are used to evaluate the STAP performance. Furthermore, experiments using a 2x2 URA hardware simulator data show that with the removal of wideband and narrowband interference through the STAP techniques, the signal tracking performance can be enhanced.

  • PDF

광대역 초음파 장 응답의 해석과 집속된 Annular Array 영상 시스템 설계에의 응용 (Analysis of Broadband Ultrasonic Field Response and its Application to the Design of Focused Annular Array System)

  • 노경태;송태경;박송배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
    • /
    • pp.1252-1255
    • /
    • 1987
  • In this paper an approach for the analysis of the transient field response of radially symmetric transducer due to a wideband ultrasonic pulse is presented, which is based on a development of Green's function and applies the linear system theory to obtain an analytic expression for the impulse response of an annulus with a planar or spherical geometry. For the focused annular array, the impulse responses of the indivisual annuli are convolved with the delayed excitation pulse, and then summed to obtain the resultant response of the array. This process is very effective in the study of the various focusing abilities of the annular array. For illustration, the field distribution of a five element annular array is treated in detail for several focusing system.

  • PDF

Low-frequency Mosaicism of Trisomy 14, Missed by Array CGH

  • Lee, Cha Gon;Yun, Jun-No;Park, Sang-Jin;Sohn, Young Bae
    • Journal of Genetic Medicine
    • /
    • 제10권1호
    • /
    • pp.52-56
    • /
    • 2013
  • Mosaic trisomy 14 syndrome is a well-known but unusual chromosomal abnormality with a distinct and recognizable phenotype. Array comparative genomic hybridization (CGH) analysis has recently become a widely used method for detecting DNA copy number changes, in place of traditional karyotype analysis. However, the array CGH shows a limitation for detecting the low-level mosaicism. Here, we report the detailed clinical and cytogenetic findings of patient with low-frequency mosaic trisomy 14, initially considered normal based on usual cut-off levels of array CGH, but confirmed by G-banding karyotyping. Our patient had global developmental delay, short stature, congenital heart disease, craniofacial dysmorphic features, and dark skin patches over her whole body. Estimated mosaicism proportion was 23.3% by G-banding karyotyping and 18.0% by array CGH.

위상배열기법을 이용한 치아결함 초음파이미지 진단기술개발 (A Study on Ultrasonic Image Diagnosis Methods of Tooth Defect with Phased-Array Techniques)

  • 오윤정;황인남;박수정;임광희;조현준;조영태
    • 한국생산제조학회지
    • /
    • 제18권6호
    • /
    • pp.604-613
    • /
    • 2009
  • Recently, researches to develop phased array ultrasonic examination techniques are proceeded to diagnose dental caries and the status of surgical operation of dental implant. Sound field analysis of phased array ultrasonic transducers were carried out in order to characterizing the ultrasonic phased array beams. The sound field of ultrasonic radiation was calculated for the sample called "gypsum-improved stone" with the similar characteristics of dental materials. Industrial phased array ultrasonic devices were utilized for the insptriion of the artificial flaws machined in the gypsum-improved stone. Dental implants were made at the pig jaw bone and defect images were confirmed for the dental implants.

  • PDF

다목적실용위성 1호 태양전지 모델링 및 궤도특성 해석 (Modeling and Power Analysis of Solar Cell Array for Kompsat 1)

  • 정규범;이상욱;최완식
    • 한국항공우주학회지
    • /
    • 제31권1호
    • /
    • pp.67-72
    • /
    • 2003
  • 본 논문에서는 다목적실용위성 1호의 태양전지를 모델링하고 해석하였다. 태양전지판의 모델링은 적은 수의 데이터만을 갖고 있으므로 비선형 시스템을 모델링하는 데 적합한 누럴 알고리즘을 사용하였다. 모델링 결과는 다목적실용위성 1호의 태양전지 셀 데이터를 고려한 태양전지판의 해석과 시뮬레이션에 의해 그 특성을 증명하였다. 또한, 태양전지판의 특성 및 전력발생 특성은 모델링 결과를 사용하여 해석하였다

Reliability Analysis of the 300 W GaInP/GaAs/Ge Solar Cell Array Using PCM

  • Shin, Goo-Hwan;Kwon, Se-Jin;Lee, Hu-Seung
    • Journal of Astronomy and Space Sciences
    • /
    • 제36권2호
    • /
    • pp.69-74
    • /
    • 2019
  • Spacecraft requires sufficient power in orbit to perform its mission. So as to comply with system requirements, the sufficient power should be made by a solar cell array by photovoltaic power conversion. A life time of space program depends on its mission considering parts reliability and parts grade. Based on the mission life time, power equipment might be designed to meet specifications. In outer space, solar cell array might generate the dc power by photovoltaic conversion effects and GaInP/GaAs/Ge solar cells are used in this study. Space programs that require more than five years should select parts for high reliability applications. Therefore, reliability analysis for high reliability applications should be performed to check its fulfilment of the requirements. This program should also require more five years for its mission and we performed its analysis using parts count method (PCM) for its reliability. Finally, we performed reliability analysis and obtained quantitative figures found out 99.9%. In this study, we presented the reliability analysis of the 300 W GaInP/GaAs/Ge solar cell array.

안정성이 개선된 고집적 가스센서 어레이 열해석 (Thermal Analysis of Highly Integrated Gas Sensor Array with Advanced Thermal Stability Properties)

  • 정완영;임준우;이덕동
    • 대한전자공학회논문지SD
    • /
    • 제40권12호
    • /
    • pp.17-23
    • /
    • 2003
  • 서로 다른 동작온도를 가지는 12개의 감지막으로 구성된 고집적형 센서어레이(다이아프램의 크기가 3×5㎟가 설계되고 열동작의 관점에서 최적화되었다. 이 센서어레이는 에칭된 실리콘기판과 접합된 얇은 유리기판 위의 중앙에 하나의 히터가 위치하고 양쪽에 동작온도가 다른 감지박막이 위치하도록 설계됨으로써 개별 마이크로센서 보다 동시에 훨씬 많은 정보를 얻을 수 있는 장점을 가지고 있다. 제안된 마이크로센서 어레이는 다이아프램의 중앙에 하나의 히터만을 가지는 구조를 하고 있기 때문에 고집적 어레이구조를 실현하면서도, 히터를 중심으로 감지박막의 동작온도에 따라 다양한 감지특정을 얻을 수 있다. 또 히터 양쪽의 감지박막의 종류를 다르게 함으로써 다이아프램위의 전 감지막이 모두 다른 감지특성을 가지게 되어 고집적 센서어레이를 구현하기 용이한 구조로 밝혀졌다.

의료 영상진단용 초음파 어레이 센서의 최적설계 및 특성해석 (Optimal Design and Analysis of a Medical Imaging Ultrasonic Array Sensor)

  • 김회용;노용래
    • 한국음향학회지
    • /
    • 제27권6호
    • /
    • pp.263-270
    • /
    • 2008
  • 초음파 어레이 센서의 성능은 구성 불성과 많은 구소 변수들에 의해 결정된다. 본 연구에서는 유한 요소해석을 통하여 구조적인 변화에 따른 초음파 어레이 센서의 성능변화를 해석하였다. 해석 결과를 기초로 하여 초음파 어레이 센서가 주파수 대역폭, 중심 주파수 그리고 -20 dB pulse length와 같은 요구 사항을 모두 만족시키며 최대의 감도를 가지도록 구조를 최적화하였다. 최적화 방법으로는 초음파 어레이 센서의 성능을 목적 함수로 하는 SQP-PD 방법을 사용하였다. 최적화된 초음파 어레이 센서는 의료 영상 진단에 적용되기 위한 모든 요구 조건을 만족하였으며, 본 설계 기술은 유사한 형태의 다른 배열형 초음파 센서에 응용 가능하다