• 설비공학논문집
• /
• 제22권4호
• /
• pp.225-233
• /
• 2010

We performed 3 dimensional numerical study on the improvement of the airflow deflection in the cleanroom of Class 1000, which is presently operated for the manufacturing process in Korea. The Deflection angle and the non-uniformity were investigated to analyze the airflow characteristics and the performance of cleanroom with variations of the cleanroom occupancy state, the filters' arrangement, and the floor return air system. From the numerical results, we found out that the airflow pattern of the cleanroom is more unidirectional and stable in the condition of at-rest than in the condition of as~built. It is due to that the equipments installed in the cleanroom play a role like partitions, which prevent the airflow from inclining toward the recirculation air duct. And it is needed to arrange the filter units parallel to the equipments array without a gap between them for maintaining the unidirectional airflow pattern. Finally, we knew that it is very important to install the partition like the eyelid above the equipment to keep the unidirectional airflow around the equipments and remove the contaminants quickly.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.13-21
• /
• 1995

This study was conducted to investigate the cutting mechanism of reciprocating knife of combine harvester. The cutting operation of reciprocating knife with the arrangement of the low-cutting and the double-cutting was demonstrated through cutting pattern diagram which was drawn by computer graphics. Various kinds and dimensions of reciprocating knives were analyzed using the developed program. The results are summarized as follows (1) The low-cutting type reciprocating knife was represented similar cutting characteristics to the standard type, but the maximum stalk-deflection was decreased as 1/2 level of the standard type. And the first ledger plate should be designed shorter than the second ledger plate. (2) The bunching area and the maximum stalk-deflection for the double cutting knife almost were not changed since cutting velocity ratio of 0.6, but the secondary cut were occurred at ratio of 0.8 and increased rapidly over these ratio. (3) The double cutting knife was recommended for the high speed combine, because its bunching area and the maximum stalk-deflection were decreased as 1/2 level of the standard type. (4) In order to maintain the proper cutting mechanism characterized by the bunching area, the maximum stalk-deflection and the secondary cutting length etc., the adequate cutting velocity at forward speed of 0.5㎧ to 1.2㎧ was from 0.3㎧ to 0.96㎧ for the double cutting knives.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.97-114
• /
• 1999

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for maxillary molar occlusion. The results of the study were as follows ; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of Maxillary premolar is appeared V form. 6. The development groove of Maxillary molar is appeared W form. 7. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 8. I was knew that the lingual groove and stuart's groove of molar runs parallel with oblique ridge. 9. The buccal groove of molar is formed parallel with direction of teeth arrangement.

• 한국콘텐츠학회논문지
• /
• 제14권7호
• /
• pp.45-57
• /
• 2014

본 연구는 소셜미디어 사용자들의 시선경로의 흐름을 통하여 SNS 사용자들의 감성적 경험을 이해하고 사용자 중심의 사용자 환경(UI)에 암시점을 주는데 그 목적이 있다. 또한 페이스북에 노출된 광고에 대한 사용자들의 응시시간 및 태도 분석을 통하여 소셜미디어 마케팅영역에 사용자경험(UX) 중심의 이론적, 실무적 공헌점을 제시하고자 한다. 시선추적 장치인 아이트래커(eye-tracker)를 활용하여 페이스북 사용자들의 UX를 추적한 결과 사용자들의 시선경로는 기존 웹에서의 사용자들이 가지고 있던 시선경로인 F-shape pattern과는 다른 H-shape pattern을 확인하였다. 또한 페이스북에 노출된 광고에 대해 4부분의 관심영역(AOI.1, AOI.2, AOI.3, AOI.4)을 설정하고 페이스북 사용자들이 가장 오래 응시하는 광고의 위치를 분석한 결과 사용자들은 페이스북 오른쪽 상단에서 두 번째 구역인 AOI.2에 가장 오랜 시선을 두었다. AOI.1, AOI.4, AOI.3의 순서로 응시순서를 추적한 실험에서도 페이지 오른쪽 상단에서 두 번째 광고에 대한 태도가 가장 좋았으며 처음과 마지막 그리고 세 번째 광고의 순으로 광고태도가 긍정적인 것으로 조사되었다.

• Steel and Composite Structures
• /
• 제19권1호
• /
• pp.131-152
• /
• 2015

Easy detection and evaluation of defect in the tube structure is a continuous problem and remains a significant demand in tube inspection technologies. This study is aimed to automate defect detection using the pattern recognition approach based on the classification of high frequency stress wave signals. The stress wave signals from vibrational impact excitation on several tube conditions were captured to identify the defect in ASTM A179 seamless steel tubes. The variation in stress wave propagation was captured by a high frequency sensor. Stress wave signals from four tubes with artificial defects of different depths and one reference tube were classified using the autoregressive (AR) algorithm. The results were demonstrated using a dendrogram. The preliminary research revealed the natural arrangement of stress wave signals were grouped into two clusters. The stress wave signals from the healthy tube were grouped together in one cluster and the signals from the defective tubes were classified in another cluster. This approach was effective in separating different stress wave signals and allowed quicker and easier defect identification and interpretation in steel tubes.

• 로봇학회논문지
• /
• 제5권3호
• /
• pp.186-196
• /
• 2010

In this paper, we present a global localization and position error compensation method in a known indoor environment using magnet hall sensors. In previous our researches, it was possible to compensate the pose errors of $x_e$, $y_e$, ${\theta}_e$ correctly on the surface of indoor environment with magnets sets by regularly arrange the magnets sets of identical pattern. To improve the proposed method, new strategy that can realize the global localization by changing arrangement of magnet pole is presented in this paper. Total six patterns of the magnets set form the unique landmarks. Therefore, the virtual map can be built by using the six landmarks randomly. The robots search a pattern of magnets set by rotating, and obtain the current global pose information by comparing the measured neighboring patterns with the map information that is saved in advance. We provide experimental results to show the effectiveness of the proposed method for a differential drive wheeled mobile robot.

• 컴퓨터교육학회논문지
• /
• 제10권3호
• /
• pp.67-73
• /
• 2007

본 논문에서는 대화 인터페이스 시스템을 구성하는 필수 요소들을 알아보고, 각각에 대한 실용적인 구현 방법을 제안한다. 구현 시스템은 담화 관리자, 의도 분석기, 개체명 인식기, SQL 질의어 생성기, 응답 생성기로 구성된다. 구현 과정에서 비교적 영역 의존성이 낮은 의도 분석 모듈은 통계 기반의 최대 엔트로피 모델을 이용한다. 그리고 높은 영역 이식성을 필요로 하는 개체명 인식기, SQL 질의어 생성기, 응답 생성기는 단순 패턴 매칭 방법을 이용한다. 일정 관리 영역에서의 실험에서 구현 시스템은 88.1%의 의도 분석 정확률과 83.4%의 SQL 질의어 생성 성공률을 보였다.

• 대한세포병리학회지
• /
• 제2권2호
• /
• pp.111-118
• /
• 1991

Fine needle aspiration biopsy cytology (FNA) is an important diagnostic tool in the management of thyroid nodule. Especially, papillary carcinoma of the thyroid has distinct morphologic features that allow a definite cytologic diagnosis with high degree of accuracy. We examined the characteristic cytologic features of 57 cases of papillary carcinoma of the thyroid, and their frequency and diagnostic significance were evaluated. The results obtained are summerized as follows; 1. In pattern of cellular arrangement, papillary structure with or without stroma is predominant feature (96%). 2. In individual cell morphology, grooved nuclei (95%), intranuclear cytoplasmic invagination (89%) and nuclear lobulation (74%) are most frequent and important cytologic findings. 3. Chromatin pattern is usually fine. Coarse chromatin is infrequent finding (37%). Nucleoli are inconspicuous. Cytoplasm us plump and distinctly eosinophilic. 4. Psammoma bodies are identified only in 4 cases (7%), but they are considered as helpful diagnostic features. 5. There are other associated findings including multinucleated giant cells (51%), macrophages (37%) and cystic degeneration (16%).

• 한국통신학회논문지
• /
• 제15권8호
• /
• pp.667-677
• /
• 1990

본 논문에서는 2차원 Hopfield 신경회로망 모델에 근거한 새로운 광 연산 메모리 시스템을 구현하였다. 2차원 영상의 실시간 처리를 위하여 입력 공간광변조기와 메모리 마스크는 상용 LCTV를 사용하고 특히, 4차원 메모리 행렬은 2차원 부행렬 마스크의 2차원적 배열로 구성하였으며 임의의 이력 패턴과 메모리 행렬간의 내적 계산은 multifocus hololens를 사용하여 처리하였다. 출력 영상은 전자적으로 thresholding 된 후 2차원 CCD 카메라를 사용하여 다시 연상 메모리 시스템의 입력으로 궤환되도록 루프를 구성하였다. 본 시스템의 연상 기억 및 오류 정정 능력에 대한 실험결과를 통해 본 논문에서 제시된 새로운 2차원 신경회로망 모델의 광학적 구현 시스템은 앞으로 패턴 인식, machine vision 등과 같은 분야에 실질적 응용이 가능하다.

• 설비공학논문집
• /
• 제28권5호
• /
• pp.186-194
• /
• 2016

As a turbulence-enhancing device, a mixing vane installed at a spacer grid of the fuel assembly plays a role in improving the convective heat transfer by generating either swirl flow in the subchannels or cross flow between fuel rod gaps. Therefore, both configuration and arrangement pattern of a mixing vane are important factors that determine the performance of a mixing vane. In this study, in order to examine the flow distribution features inside $5{\times}5$ fuel assembly with swirl-type mixing vanes used in benchmark calculation of OECD/NEA, simulations were conducted with commercial CFD software ANSYS CFX R.14. Predicted results were compared to data measured from MATiS-H (Measurement and Analysis of Turbulent Mixing in Subchannels-Horizontal) test facility. In addition, the effect of swirl-type mixing vanes on flow pattern inside the fuel assembly was described.