• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.202-209
• /
• 2003

We succeeded to build a cost effective assistance robotic arm with a compact and lightweight body. The robotic arm has three joints, and the tip of robotic arm to install tools consists of a closed link mechanism, which consisted of two actuators and several links. The robotic arm has been made possible by the use of actuators typically used in radio control devices. The controller of the robotic arm consists of a single chip PIC only. The robotic arm has a friendly user interface, as the operators are aged and disabled in most cases. The operator can manipulate the robotic arm by voice commands or by pressing a push button. The robotic arm has been successfully prototyped and tested on an elderly patient to assist with eating. The results of field test were satisfactory.

• Journal of radiological science and technology
• /
• v.46 no.5
• /
• pp.395-399
• /
• 2023

The knee arthritis patients are generally performed standing position radiography. However, patients with pain caused by degenerative diseases or injuries in the knee have difficulty maintaining a standing position. Therefore, this study aims to develop a knee joint standing weight bearing projection assist device to solve these problems when patients undergo knee radiography due to various diseases. The design of the knee joint weight-bearing radiography assist device is carried out with 3D design and drawing production to secure basic data, electric support and frame manufacture. A fixed device for maintaining the patient's knee standing weight-bearing projection, an electric digital height device, a digital protractor, and a safety device were designed. The arm support is made of PVC with a cushion to relieve the impact and make it easier to remove debris. The digital electric device can be moved up and down according to the patient's height, and a remote control is attached. The safety device is made to be adjustable in size by attaching metal hooks on both sides of the frame and to shield the scrotum. A digital protractor was attached to the side frame to set the desired knee angle. When a self-made assist device was used to perform a knee joint standing weight bearing projection, it helped maintain arm support and lower extremities position. In addition, the height could be adjusted using an assist device during standing projections, which helped the patient maintain the position.

• Physical Therapy Korea
• /
• v.27 no.1
• /
• pp.11-18
• /
• 2020

Background: As technology has progressed, various robot-assisted devices have been developed to reduce therapists' labor and assist in therapy. However, due to their many limitations, it is more practical to use traditional mechanical devices. The grahamizer is one such traditional mechanical device used clinically to rehabilitate the upper extremities. No study has yet established the efficacy of the grahamizer in individuals with stroke. Objects: This study investigated the immediate change in arm reaching after the use of a grahamizer. Methods: Twenty-two stroke survivors participated in this study (11 males and 11 females). The reaching of the more-affected arm was measured three times using the three-dimentional electromagnetic motion tracking system "trakSTAR". After the first measurement, the subjects performed 500 rotatory arm exercises using the grahamizer. To assess the grahamizer's effect, the subjects were remeasured in the same way. Results: There were significant increases in the reaching distance (p < 0.05) and movement smoothness (p < 0.05) of the more-affected arm after using the grahamizer. Conclusion: Our study confirms that using the grahamizer is beneficial in the rehabilitation for improving movement of the more-affected arm in stroke survivors.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1541-1544
• /
• 1997

The rehailitation robot, one of the service robot, is the important area in the service automation. In the paper, we describe the overall configuration of KARES(KAIST Rehabilitation Engineering System), which is an intellingent rehabilitaion robotic system designed to assist the independent livelihood of the handicapped and the eldrly. KARES consists of the 6 degree of freedom robot arm mounted on a wheelchair, the controller ofr the arm, sensors to perceive environment, and user interface. Basic desired hobs in KARES are gripping the target object and moving it to the user's face for eating, drinking, or cooperation work wiht the mouth. Currently, the manual operation of the arm is available for gripping to target objects. The autonomous functionality will be ginven for the facilities of the human operator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.161.5-161
• /
• 2001

Robots are required to assist our activities in daily life. In this paper, we focus on arm movement to catch moving object as one of important tasks frequently performed by human. We propose an algorithm which enables a robot to perform human-like arm motion to catch a moving object. First we analyze human hand trajectories and velocity profiles to catch an object. From the experimental results, we extract some characteristics in the process of approaching and following a moving object and confirm that these are necessary to realize human-like motion. We then adopt an instantaneous optimal control method which evaluates the error and energy cost at each sampling step, and design two time-varying weight matrices to introduce human characteristic into robot motion. The matrix concerning the error is defined as a time-increasing ...

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1172-1175
• /
• 2020

Automotive ECU integrates CPU core, IVN controller, memory interface, sensor interface, I/O interface, and so on. Current automotive ECUs are often developed with proprietary processor architectures. However, demends for standard processors such as ARM and RISC-V increase rapidly for saftware compatibility in autonomous vehicles and connected cars. In this paper, an automotive ECU is designed for parking assist system based on RISC-V with open instruction set architecture. It includes 32b RISC-V CPU core, IVN controllers such as CAN and LIN, memory interfaces such as ROM and SRAM, and I/O interfaces such as SPI, UART, and I2C. Fabricated in 65nm CMOS technology, its operating frequency, area, and gate count are 50MHz, 0.37㎟, and 55,310 gates, respectively.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.2
• /
• pp.93-98
• /
• 2019

Objective: The purpose of this study was to investigate the effect of robot arm reach training on upper extremity functional movement in chronic stroke survivors. Design: One group pretest-posttest design. Methods: Thirteen chronic stroke survivors participated in this study. Robot arm reach training was performed with a Whole Arm Manipulator (WAM) and a 120-inch projective display to provide visual and auditory feedback. During the robotic arm reach training, WAM provided gravity compensation and assist-as-needed (AAN) force according to the robot control mode. When a participant could not move the arm toward the target for more than 2 seconds, WAM provided AAN force to reach the desired targets. All patients participated in the training for 40 minutes per day, 3 times a week, for 4 weeks. Main outcome measures were the Fugl-Meyer Assessment (FMA), Action Research Arm Test (ARAT) and Box and Block Test (BBT) to assess upper extremity functional movement. Results: After 4 weeks, significant improvement was observed in upper extremity functional movement (FMA: 42.15 to 46.23, BBT: 12.23 to 14.00, p<0.05). In the subscore analysis of the FMA upper extremity motor function domains, significant improvement was observed in upper extremity and coordination/speed units (p<0.05). However, there were no significant differences in the ARAT. Conclusions: This study showed the positive effects of robot arm reach training on upper extremity functional movement in chronic stroke survivors. In particular, we confirmed that robot arm reach training could have a positive influence by leading to improvement of motor recovery of the proximal upper extremity.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.2
• /
• pp.115-123
• /
• 2017

This paper presents the design and the control performance of a novel dynamic compliant-arm support with parallel elastic actuators that was developed to assist with the daily living activities of those whose arms are compromised by muscular disease or the aging process. The parallel elastic-arm support consists of a compliant mechanism with combined passive and active components for human interaction and to reach the user's desired positions. The achievement of these tasks requires impedance control, which can change the virtual stiffness, damping coefficients, and equilibrium points of the system; however, the desired-position tracking by the impedance control is limited when the end-effector weight varies according to the equipping of diverse objects. A prompt algorithm regarding weight calibration and friction compensation is adopted to overcome this problem. A result comparison shows that, by accurately assessing the desired workspace, the proposed algorithm is more effective for the accomplishment of the desired activities.

• The Journal of Korea Robotics Society
• /
• v.18 no.4
• /
• pp.376-384
• /
• 2023

In this paper, we introduce an upper extremity rehabilitation robot, NREH (NRC End-effector based Rehabilitation arm at Home). Through NREH, stroke survivors could continuously exercise their upper extremities at home. NREH allows a user to hold the handle of the end-effector of the robot arm. NREH is a end-effector-based robot that moves the arm on a two-dimensional plane, but the tilt angle can be adjusted to mimic a movement similar to that in a three-dimensional space. Depending on the tilting angle, it is possible to perform customized exercises that can adjust the difficulty for each user. The user can sit down facing the robot and perform exercises such as arm reaching. When the user sits 90 degrees sideways, the user can also exercise their arms on a plane parallel to the sagittal plane. NREH was designed to be as simple as possible considering its use at home. By applying error augmentation, the exercise effect can be increased, and assistance force or resistance force can be applied as needed. Using an encoder on two actuators and a force/torque sensor on the end-effector, NREH can continuously collect and analyze the user's movement data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1535-1538
• /
• 2004

In this paper, an Intelligent Bed Robot System (IBRS) is proposed, that is a special bed equipped with robot manipulator. To assist a patient using IBRS, pose and motion estimation process is fundamental. It is designed to help the elderly and the disabled for their independent life in bed without other assistants. For this purpose, we use the pressure sensor distributed mattress for detecting the change of motion on the bed. Using that data, we control the robot arm to move to the appropriate position and serve to the user. In addition, we can estimate the user's intention based on the change of pressure and use those data to control the robot arm guide.