• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.292-299
• /
• 1998

The effect of characteristic of surface roughness on friction and sliding wear was studied experimentally with ball-on-disk type wear tester. The test was conducted with specimens those have varying arithmetic mean value, skewness and kurtosis under the condition of different load, sliding speed and lubricant viscosity. The surface of the lower skewness in negative value or the highel kurtosis tends to have low friction for the same arithmetic mean value. There is optimum arithmetic mean value surface roughness for operating variables have load, speed, etc.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.759-768
• /
• 2005

K-means clustering has been widely used in many applications, such that pattern analysis, data analysis, market research and so on. It can identify dense and sparse regions among data attributes or object attributes. But k-means algorithm requires many hours to get k clusters, because it is more primitive and explorative. In this paper we propose a new method of k-means clustering using the grid-based representative value(arithmetic and trimmed mean) for sample. It is more fast than any traditional clustering method and maintains its accuracy.

• Journal of Preventive Medicine and Public Health
• /
• 제41권2호
• /
• pp.128-134
• /
• 2008

Objectives : This study was conducted to determine the reference interval of serum thyroid hormones(TSH, $FT_3$, $FT_4$) in healthy Korean adults. Methods : Health examination data from 1,591 healthy Korean adults who visited an university hospital were analyzed. Patients with specific health conditions capable of altering laboratory results were excluded from the study. Serum thyroid hormones were measured using IMMULITE 2000 (DPC, USA, 2002). Subjects were 18-65 years old; 911 were male, and 690 were female. Results : The arithmetic means of TSH, $FT_3$, and $FT_4$ values for male subjects were $1.28{\pm}1.84\;{\mu}IU/ml$, $3.23{\pm}0.57\;pg/ml$, and $1.42{\pm}0.22\;ng/dl$, respectively. In female subjects, the arithmetic means of TSH, FT3, and FT4 values were $1.49{\pm}2.08\;{\mu}IU/ml$, $3.08{\pm}0.54\;pg/ml$, and $1.29{\pm}0.24\;ng/dl$, respectively. The arithmetic mean $FT_4$ value for males decreased with age (p<0.01). The arithmetic mean $FT_3$ value for females increased with age (p<0.01). The arithmetic mean thyroid hormone values of all study subjects differed significantly based on season. The arithmetic mean of male $FT_4$ decreased with increasing BMI (p<0.01). The arithmetic mean of female $FT_3$ increased with increasing BMI (p<0.01). The reference intervals recommended by the IMMULITE 2000 manufacturer are $0.40-4.00\;{\mu}IU/ml$ for TSH, 1.80-4.20 pg/ml for $FT_3$, and 0.80-1.90 ng/dl for $FT_4$ (same values for both genders). Conclusions : There was a significant difference in the interval of thyroid hormones between males and females, but the reference interval of IMMULITE 2000 was not established by gender. There is a need to reestablish the reference interval for thyroid hormones in Korean healthy adults.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1343-1358
• /
• 2020

In the stagewise arithmetic orthogonal matching pursuit algorithm, the weak threshold used in sparsity estimation is determined via maximum iterations. Different maximum iterations correspond to different thresholds and affect the performance of the algorithm. To solve this problem, we propose an improved variable weak threshold based on the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the residual error value to control the weak threshold. When the residual value decreases, the threshold value continuously increases, so that the atoms contained in the atomic set are closer to the real sparsity value, making it possible to improve the reconstruction accuracy. In addition, we improved the generalized Jaccard coefficient in order to replace the inner product method that is used in the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the covariance to replace the joint expectation for two variables based on the generalized Jaccard coefficient. The improved generalized Jaccard coefficient can be used to generate a more accurate calculation of the correlation between the measurement matrixes. In addition, the residual is more accurate, which can reduce the possibility of selecting the wrong atoms. We demonstrate using simulations that the proposed algorithm produces a better reconstruction result in the reconstruction of a one-dimensional signal and two-dimensional image signal.

• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.493-505
• /
• 2015

Objectives: The purpose of this study was to evaluate the relevance of adjusting a urinary sample for urine hippuric correction value and its effects. Urinary biological monitoring data are typically adjusted to a constant creatinine and specific gravity concentration to correct for variable dilutions among spot samples. This study was conducted to evaluate the suitability of adjusting the urinary concentrations of urine creatinine and specific gravity(SG). Methods: We measured the concentrations of hippuric acid, in spot urine samples collected from control(119), case(120) individuals. The value of hippuric acid was adjusted by SG and urinary creatinine(HPLC & Jaffe). Results: The major results were as follows. The concentrations of urinary creatinine and SG for the control group were 1.84 g/L(SD 0.99) for arithmetic mean and 1.56 g/L(GSD 1.86) for geometric mean by HPLC method, 1.57 g/L (SD, 0.82) for arithmetic mean and 1.33 g/L(GSD 1.85) for geometric mean by Jaffe method, 1.028(SD 0.09) for arithmetic mean and 1.02(GSD 1.06) for geometric mean by refractometer. Hippuric acid levels were 0.40 g/L(SD 0.51) by arithmetic mean and 0.20 g/L(GSD 3.59). In that case the exposed group was 1.40 g/L(SD 0.58) for arithmetic mean and 1.28 g/L(GSD 1.55) for geometric mean by HPLC method, 1.27 g/L(SD 0.56) for arithmetic mean and 1.14 g/L(GSD 1.62) for geometric mean by Jaffe method, 1.045 L(SD 0.27) for arithmetic mean and 1.02(GSD 1.13) for geometric mean by refractometer(P<0.05). Hippuric acid levels were 0.67 g/L(SD 0.79) for arithmetic mean and 0.39 g/L(GSD 2.94)(p<0.05). The urine creatinine concentrations were affected by gender(p < 0.01) but SG levels were not affected by gender or age(p>0.05). After adjustment, urine hippuric acid was correlated with creatinine(HPLC & Jaffe)(r=0.723, P<0.05, r=0.708, P<0.05) and SG(r=0.936, P<0.05) and the control group shows significantly higher than the case group. In the case group for adjusted urine hippuric acid was correlated with creatinine(HPLC & Jaffe), (r=0.736, P<0.05), r=0.549, P<0.05), SG(r=0.549, P<0.05). After adjusting urine hippuric acid by urine creatinine(HPLC and Jaffe method) and specific gravity, significant associations were found between the control group and case group, respectively(r=0.832, P<0.05, r=0.845, P<0.05) and (r=0.841, P<0.05, r=0.849, P<0.05). Specific gravity adjustment appears to be more appropriate for variations in the urine creatinine method. Conclusion: we found that urinary creatinine concentrations were significantly affected by gender, and other factors and that care should therefore be exercised when correcting urinary metabolites according to the urinary creatinine concentration in spot urine. It is determined that additional study is needed for biological monitoring.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.18-24
• /
• 2004

The effect of surface characterization parameters, such as surface roughness, skewness and kurtosis, on sliding friction and wear was studied experimentally. The friction coefficient was examined under the various parameters and sliding speed, normal load and type of lubricant with ball-on-disk type tribo-meter. The surface of the lower skewness in negative or the higher kurtosis between the same arithmetic mean value tends to indicate low friction.

• 한국산업보건학회지
• /
• 제22권1호
• /
• pp.42-51
• /
• 2012

Objectives: To compare the exposure level of extremely low frequency (ELF) magnetic fields among semiconductor workers, shipyard welders and office workers. Methods: To measure the ELF magnetic field concentration, EMDEX LITE (Enertech, USA) were used and monitored for eight hours continuously. Five companies handling the electric and magnetic field (EMF) source were investigated, which the exposure groups were classified into three groups: semiconductor workers, welders, and office workers. Welder group was chosen as a high exposed group and office group as a low exposed group. Results: The arithmetic mean (${\pm}SD$) and geometric mean (GSD) of personal exposure level of semiconductor workers were 0.73 (${\pm}1.33$) ${\mu}T$, 0.43 (2.88) ${\mu}T$, respectively. The ceiling value ranged between 0.18 and 123.2 ${\mu}T$. Welders were exposed high with the arithmetic mean value of 3.46 (${\pm}\;13.46$) ${\mu}T$ and geometric mean value of 0.45 (4.70) ${\mu}T$, respectively, and ceiling value range of 75.5~129.6 ${\mu}T$. The exposure levels of office workers were low compared to other exposed groups; the arithmetic mean 0.05 (${\pm}0.13$) ${\mu}T$, geometric mean 0.03 (2.38) ${\mu}T$ and ceiling value range 0.37~3.35 ${\mu}T$. This study revealed statistically significant differences of the mean ELF magnetic field exposure doses among three groups (p < 0.01). Conclusions: The average ELF magnetic field exposure doses of semiconductor workers were much higher than those of office workers in control group, but were lower than those of welders in high exposure group.

• 대한수학회보
• /
• 제50권1호
• /
• pp.263-273
• /
• 2013

A mean-value result, saying that the difference quotient of a differentiable function in a real interval is a mean value of its derivatives at the endpoints of the interval, leads to the functional equation $$\frac{f(x)-F(y)}{x-y}=M(g(x),\;G(y)),\;x{\neq}y$$, where M is a given mean and $f$, F, $g$, G are the unknown functions. Solving this equation for the arithmetic, geometric and harmonic means, we obtain, respectively, characterizations of square polynomials, homographic and square-root functions. A new criterion of the monotonicity of a real function is presented.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2003년도 추계학술대회
• /
• pp.229-238
• /
• 2003

K-means clustering has been widely used in many applications, such that pattern analysis, data analysis, market research and so on. It can identify dense and sparse regions among data attributes or object attributes. But k-means algorithm requires many hours to get k clusters, because it is more primitive and explorative. In this paper we propose a new method of k-means clustering using the grid-based representative value(arithmetic and trimmed mean) for sample. It is more fast than any traditional clustering method and maintains its accuracy.

• Wind and Structures
• /
• 제19권5호
• /
• pp.505-522
• /
• 2014

While effects of the atmospheric boundary layer flow on engineering infrastructure are more or less known, some local transient winds create difficulties for structures, traffic and human activities. Hence, further research is required to fully elucidate flow characteristics of some of those very unique local winds. In this study, important characteristics of observed vertical velocity profiles along the main wind direction for the gusty Bora wind blowing along the eastern Adriatic coast are presented. Commonly used empirical power-law and the logarithmic-law profiles are compared against unique 3-level high-frequency Bora measurements. The experimental data agree well with the power-law and logarithmic-law approximations. An interesting feature observed is a decrease in the power-law exponent and aerodynamic surface roughness length, and an increase in friction velocity with increasing Bora wind velocity. This indicates an urban-like velocity profile for smaller wind velocities and rural-like velocity profile for larger wind velocities, which is due to a stronger increase in absolute velocity at each of the heights observed as compared to the respective velocity gradient (difference in average velocity among two different heights). The trends observed are similar during both the day and night. The thermal stratification is near neutral due to a strong mechanical mixing. The differences in aerodynamic surface roughness length are negligible for different time averaging periods when using the median. For the friction velocity, the arithmetic mean proved to be independent of the time record length, while for the power-law exponent both the arithmetic mean and the median are not influenced by the time averaging period. Another issue is a large difference in aerodynamic surface roughness length when calculating using the arithmetic mean and the median. This indicates that the more robust median is a more suitable parameter to determine the aerodynamic surface roughness length than the arithmetic mean value. Variations in velocity profiles at the same site during different wind periods are interesting because, in the engineering community, it has been commonly accepted that the aerodynamic characteristics at a particular site remain the same during various wind regimes.