• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.835-839
• /
• 2011

토치형 상압 플라즈마 반응기를 통한 방전 및 플라즈마 flame에 대한 분석과 발생된 플라즈마 현상을 이용하여 E. coli에 대한 살균효과를 측정하였다. 상압 플라즈마 반응기를 통해 나오는 플라즈마 flame의 길이는 입력전압, 반응기의 유량 그리고 아르곤/산소 혼합기체에서의 산소비율에 영향을 크게 받았다. 플라즈마 flame에 의한 가열효과는 10분 조사 후에도 $43^{\circ}C$ 미만으로 저온처리가 가능했다. E. coli에 대한 살균처리에서 입력전압의 증가, 아르곤/산소 혼합기체에서의 산소비율 증가 그리고 플라즈마 flame에 대한 노출시간의 증가에 따라 전체적인 살균효과를 향상되었다. 플라즈마 처리 시에 오존농도가 높은 공정조건에서 플라즈마 flame의 직접적인 접촉시간을 증가시키면 살균효과를 극대화할 수 있다.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.802-808
• /
• 1994

The purpose of this paper is to describe an application of plasma polymerized thin film as an electron beam resist. Plasma polymerized thin film was prepared using an interelectrode capacitively coupled gas-flow-type reactor, and chosen methylmethacrylate(MMA)and methylmethacrylate-tetrameth-yltin(MMA-TMT) as a monomer. This thin films were also delineated by the electron-beam apparatus with an acceleration voltage of 30kV and an expose dose ranging from 20 to 900$\mu$C/cmS02T. The delineated pattern in the resist was developed with the same reactor which is used for polymerization using an argon as etching gas. The growth rate and etching rate of the thin film is increased with increasing of discharge power. Thin films by plasma polymerization show polymerization rate of 30~45($\pm$3) A/min, and etching rate of 440($\pm$30) A/min during Ar plasma etching at discharge power of 100W. In apparently lower than that of conventional PMMA, but the plasma-etching rate of PP(MMA-TMT) was higher than that of PPMMA.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.313-320
• /
• 2012

For the preparation of hardened films which can be applied as a binder for flame-resistant materials such as silica, linseed oil was subjected to a low temperature plasma treatment with argon, or oxygen gas. The film was produced much faster than so-called drying of oil in air. The SEM analysis for silica particles embedded in the hardened film after plasma treatment showed that the silica particles were immobilized on substrate and were evenly dispersed. The FT-IR spectral analysis for the plasma-treated linseed oil films demonstrated that the radicals which were formed during the plasma treatments caused the linseed oil to be cross-linked, and the plasmas attacked carbon chains of the oil randomly without focusing on specific vulnerable bonds such carbon double and carbonyl bonds intensively unless exposure times of the plasmas were prolonged too much, while the cross-linking of the air-dried film was considered to occur at the well-known typical sites, i.e., carbon-carbon double bond and ${\alpha}$-methylene carbon. Burning times, as a measure of flame/fire resistance, of silica-filled cellulose substrates, increased with increasing contents of silica.

• 공업화학
• /
• 제22권3호
• /
• pp.261-265
• /
• 2011

아르곤과 산소 대기압 플라즈마를 이용한 미생물인 E. coli의 살균효과를 분석하였다. 유전체 격막 방전 형태의 플라즈마 반응기는 아르곤과 산소 혼합기체에서 균일한 플라즈마 방전과 오존 생성에 효과적이었다. 직접적인 대기압 플라즈마 조사에 따른 E. coli의 살균처리 공정에서 산소에 대한 혼합비와 인가전력의 증가는 방전기체의 오존 발생농도를 높여 미생물의 살균효과를 증가시켰다. 반응기와 시료와의 거리는 살균효과를 증가하기 위하여 가급적 작게 하는 것이 효율적이었다. 본 연구를 통하여 대기압 플라즈마는 오존과 같은 산화촉진제의 발생으로 저온에서 E. coli와 같은 미생물을 효과적으로 살균할 수 있어 기존의 살균법을 대체 할 수 있는 차세대 살균기술로서의 개발 가능성을 확인 할 수 있었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1996년도 추계학술발표회논문집
• /
• pp.63-66
• /
• 1996

Electron temperature and electron density were measured in a radio-frequency(rf) inductively coupled plasma using probe measurements. Measurements were made in an argon discharge for pressures from 10 to 100mTorr and input rf power from 100 to 800W. Spatial distribution Electron temperature and electron density were measured for discharge with same aspect ratio. Electron temperature and Electron density were found to depend on both pressure and power. Electron density was creased with increasing pressure, but peaked in a 70mTorr discharge. Radial distribution of the electron density was peaked in the plasma fringes. These results were compared to a simple model of inductively coupled plasmas.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.510-514
• /
• 2004

Iron-carbon nanocapsules were synthesized by plasma arc discharge (PAD) process under various atmosphere of methane, argon and hydrogen gas. Characterization and surface properties were investigated by means of HRTEM, XRD, XPS and Mossbauer spectroscopy. Fe nanocapsules synthesized were composed of three phases $({\alpha}-Fe,\;Y-Fe\;and\;Fe_{3}C)$ with core/shell structures. The surface of nanocapsules was covered by the shell of graphite phase in the thickness of $4{\~}5$nm.

• Carbon letters
• /
• 제1권3_4호
• /
• pp.129-132
• /
• 2001

Carbonaceous thin films were prepared from acetylene and argon gases by plasma assisted chemical vapor deposition (Plasma CVD) at 873 K. The carbonaceous thin films were characterized by mainly Raman spectroscopy, and their electrochemical properties were studied by cyclic voltammetry and charge-discharge measurements in propylene carbonate (PC) solution. Raman spectra showed that crystallinity of carbonaceous thin films is correlated by the applied RF power. The difference of the applied RF power also affected on the results of cyclic voltammetry and charge-discharge measurements. In PC solution, intercalation and de-intercalation of lithium ion can occur as well as in the mixed solution of EC and DEC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1898-1900
• /
• 1996

The Laser aided diagnostic method makes it possible to diagnose plasma characteristics which have never been done by other one. The aim of this study is to measure the electron density profile of an arc plasma by Mach-Zenhder interferometer. The two laser beams (He-Ne and Argon Lasers), which are different in wavelength, pass across an arc plasma and meet a change of refractivity which makes fringe shifts. From this effects we could find densities of electron and neutral particle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.145-148
• /
• 2001

A large area plasma source using parallel $2{\times}2$ ICP antennas showed improved etching uniformity by the E-ICP operation. ITO etching process with $CH_4$ gas chemistry is optimized with the DOE (Design of Experiment) based on Taguchi method. Various methane ratios in methane and argon mixture are compared to confirm the effect of polymerization. The analysis shows that the effect of bias power is the largeset. We obtained higher ITO etching rate and better uniformity on $350{\times}300mm$ substrate at the 50Hz magnetization frequency of the E-ICP operation technique,

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1400-1402
• /
• 1994

Plasma polymerized thin films was prepared using an interelectrod inductively coupled gas-flow-type reactor. Styrene was chosen as the monomer to be used. This thin films were also delineated by the electron-beam apparatus with an acceleration voltage 30kV, and the pattern in the resist was developed with RIE 80 with argon gas mixture ratio, pressure and RF power. The molecular structure of thin films was investigated by GPC and FT-IR and then was discussed in relation to its quality as a resist. In the case of plasma polymerization, thickness of resist could be controlled by discharge duration and power. Also etch rate is increased as to growing pressure with RIE 80.