• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.290-295
• /
• 2000

An experimental study was carried out in a cavity with upper channel and square heat surface by visualization equipment with Mach-Zehnder interferometer and laser apparatus. The visualization system consists of 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system(CACTUS'2000). Obtained result showed various flow patterns. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach-Zehnder are also compared in terms of constant heat flux.

• 비파괴검사학회지
• /
• 제14권4호
• /
• pp.219-227
• /
• 1995

아르곤 이온 레이저를 광원으로 시편을 주기적으로 가열하여 광음향신호를 발생시키고 가속도 센서로 측정하는 2차원 광음향 현미경을 제작하였다. 다양한 결함을 가진 알루미늄 시편을 검사하고 광음향현미경의 특성을 조사하였으며 변조주파수, 레이저광의 단면적 등 실험 조건에 대한 의존성을 조사하여 적절한 실험조건을 확립하였다.

• 태양에너지
• /
• 제20권4호
• /
• pp.53-60
• /
• 2000

An experimental study was carried out in a cavity with upper channel and square heat surface by visualization equipment with Mach-Zehnder interferometer and laser apparatus. The visualization system consists of 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system(CACTUS'2000). Obtained result showed various flow patterns. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach-Zehnder are also compared in terms of constant heat flux.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1361-1365
• /
• 2013

The smallest ketenimine and hydrogen cyanide N-methylide ($CH_2CNH$ and $CH_2NCH$) are provided from the argon/acetonitrile matrix samples exposed to radiation from laser ablation of transition-metals. New infrared bands are observed in addition to better determination of the vibrational characteristics for the previously reported bands, and the $^{13}C$ substituted isotopomers ($^{13}{CH_2}^{13}CNH$ and $^{13}CH_2N^{13}CH$) are also generated. Density functional frequency calculations and the D and $^{13}C$ isotopic shifts substantiate the vibrational assignments. $CH_2CNH$ is probably produced through single-step conversion of $CH_3CN$, whereas $CH_2NCH$ through two-step conversion via 2H-azirine. Inter-conversions between these two products evidently do not occur during photolysis and annealing.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.212-213
• /
• 2000

레이저로 발생시킨 플라즈마의 시간적, 공간적인 분광학적인 특성을 조사하였다. 진공분위기(약1x$10^1$에서 1x$10^{-5}$ Torr) 및 Argon분위기(약 1x$10^{0}$에서 1x$10^{-3}$ Torr)에서 INVAR 시편에 대해 detector의 gate 지연시간을 조정하여 시간적인 플라즈마의 분광선 세기를 측정하였다. 또한 레이저광의 조사방향과 수직되게 놓여 있는 시편에 대해 그림 1과 같이 시편 표면 위로부터 약 0, 2, 4, 6 mm 떨어진 위치에서 플라즈마의 분광선 세기를 관찰하였다. (중략)

• 한국광학회지
• /
• 제2권3호
• /
• pp.133-138
• /
• 1991

Eosin을 첨가한 boric acid 유리질 포화흡수체의 포화세기는 비교적 낮은 것으로(약 700 mW/$\textrm{cm}^2$) 측정되었고, 세기가 낮은 경우에서도 축퇴4광파혼합에 의해 광학적 위상공액파를 발생시킬 수 있었다. 파장이 488nm인 Ar-ion laser를 사용하여 이 매질에서 DFWM에 의한 위상공액파의 편광특성을 보였고, 위상공액 반사율의 빛의 세기와 파장에 대한 의존성을 측정하였다. 이 매질에서 비축퇴2광파혼합에 의한 에너지 교환은 두 광속의 주파수차가 약 100 Hz 정도인 경우에 최대가 되었다.

• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.26-33
• /
• 2002

This study was undertaken to obtain the fundamental knowledges on the weld deflects and it's realtime monitoring method. The paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurements during $CO_2$ laser welding of STS 304 stainless steel and A5083 aluminum alloy in different welding condition. The characteristic frequencies of plasma and keyhole fluctuations at different welding speed and shield gases were measured and compared with the results of Fourier analyses of temporal AE and LE spectra, and they had considerably good agreement with keyhole and plasma fluctuation. Namely, the low frequency peaks of AE and LE shifted to higher frequency range with the welding speed increase, and leer the argon shield gas it was higher than that in helium and nitrogen gases. The low frequencies dominating in fluctuation spectra of LE probably reflect keyhole opening instability. It is possible to monitor the weld bead deflects by analyzing the acoustic and/or plasma light emission signals.

• Bulletin of the Korean Chemical Society
• /
• 제10권5호
• /
• pp.411-414
• /
• 1989

A new sensitive fluorimetric method for the determination of N-methylcarbamates, a class of well known insecticides, based on the derivatization with 7-chloro-4-nitrosobenz-2-oxa-1,3-diazole (NBD-Cl) has been developed. Unreacted NBD-Cl was eluted ahead of derivatized carbamates from C-18 bonded column. An argon ion laser was used as an excitation source of chromatographic eluents and its fluorescence signal was monitored with optical multichannel analyzer. The detection limits of various carbamates were about 100 pg range and the working curves were linear to $10^4-10^5$ nanogram ranges.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권6호
• /
• pp.540-545
• /
• 2008

Since mid 20th century, dental treatments with laser have been introduced and improved a lot. Because early $CO_2$, Nd:YAG, diode, argon, and holmium lasers are used for dealing soft tissue, so it applied just limited field. But, in 1997 the lasers of erbium family that able to dealing soft and hard tissue also were introduced, laser application fields are enlarged. In today, the application fields reach on implantation treatment, so clinicians can use the laser to make holes for implantation, and flap elevation, even though treating peri-implantitis. So our class want to discover the optimal setting of Er:YAG laser when treating peri-implantitis. We observed the surface that initially treated by RBM and TPS passion and laser with varied options of exposure time and power with SEM image. For this we conclude the optimal setting range that does not alter the implant surface structure and report it.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2054-2063
• /
• 2020

The high-temperature oxidation behavior of ZrSi₂ used as a coating material for nuclear fuel cladding was investigated for developing accident-tolerant fuel cladding of light water reactors. Bulk ZrSi₂ samples were prepared by spark plasma sintering. In situ X-ray diffraction was conducted in air at 900, 1000, and 1100 ℃ for 20 h. The microstructures of the samples before and after oxidation were examined by scanning electron microscopy and transmission electron microscopy. The results showed that the oxide layer of zirconium silicide exhibited a layer-by-layer structure of crystalline ZrO₂ and amorphous SiO₂, and the high-temperature oxidation resistance was superior to that of Zircaloy-4 owing to the SiO₂ layer formed. ZrSi₂ was coated on the Zircaloy-4 tube surface using laser 3D printing, and the coated tube was oxidized for 2000 s at 1200 ℃ under a vapor/argon mixture atmosphere. The outer surface of the coated tube was hardly oxidized (10-30 ㎛), while the inner surface of the uncoated tube was significantly oxidized to approximately 300 ㎛.