• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1147-1156
• /
• 2011

CLECDiS 는 면적변화형 정전용량 센서의 단점을 극복하고 나노미터 수준의 분해능으로 밀리미터 이상의 큰 변위를 측정하도록 개발된 접촉식 변위센서이다. 그러나 접촉구동 특성으로 인하여 표면평탄도와 마찰에 의해 작은 접촉상태의 변화에도 출력 신호는 크게 왜곡될 수 있어 실제 이를 활용하기 위해서는 전극간 접촉상태를 안정적으로 유지하는 것이 중요하다. 이에 본 연구에서는 전극간 접촉상태의 변화에 따른 신호의 왜곡 특성을 실제 출력 신호와 비교하여 분석하고, 접촉면 내 압력 분포와 센서의 운동 오차 측정을 통해 접촉상태의 변화를 파악하였다. 이를 통하여 센서의 운동 오차와 마찰력의 영향을 최소화하기 위한 접촉 유지 기구를 설계하고 제작하였으며 이를 이용한 구동실험을 통해 보다 안정적인 센서 출력 신호를 획득하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.841-842
• /
• 2011

• 산업경영시스템학회지
• /
• 제33권4호
• /
• pp.201-208
• /
• 2010

This research is about developing an efficient solution procedure for the vehicle routing problem under varying vehicle moving speeds for hour-based time interval. Different moving speeds for every hour is too difficult condition to solve for this type of combinatorial optimization problem. A methodology to divide the 12 hour based time interval offered by government into 5 different time intervals and then divide delivery area into 12 small divisions first and then re-organizing them into 5 groups. Then vehicle moving speeds are no longer varying in each of the 5 divisions. Therefore, a typical TSP solution procedure may be applied to find the shortest path for all 5 divisions and then connect the local shortest paths to form a delivery path for whole area. Developed solution procedures are explained in detail with 60 points example.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.47-52
• /
• 2007

Organic field-effect transistors (OFETS) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with varying channel length. The CuPc FET device was made a top-contact type and the channel length was a $100\;{\mu}m,\;50\;{\mu}m,\;40\;{\mu}m,\;and\;30\;{\mu}m$ and the channel width was a fixed at 3 mm. We observed a typical current-voltage (I-V) characteristics in CuPc FET with varying channel length (L) and we calculated the effective mobility. Also, we measured a capacitance-voltage (C-V) by applied bias voltage with varying frequency at 43, 100, 1000 Hz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.275-278
• /
• 2003

The aim of the study is to scrutinize the relationship between the area of resonance and center frequency with varying thickness by analyzing the characteristics of 2-port resonator. This was done through ideal design using Leach model equivalent model modified Mason model equivalent circuit for the application of bandpass filter high-frequency band with resonator Moreover, through the design of ladder-type BPF, we were able to observe changes in bandwidth, resonation, out-of-band rejection depending on the number and area of resonator.

• 자원환경지질
• /
• 제29권5호
• /
• pp.545-559
• /
• 1996

Rare metal (Nb-Zr-REE) ore deposits are located in the Chungju area. Geotectonically, the rare metal ore deposits are situated in the transitional zone between Kyeonggi massif and Okcheon belt. The rare metal deposits are distributed in Kyemyeongsan Formation which consist of schist and alkaline igneous rocks. Alkali granite has suffered extensive post-magmatic metasomatism and hydrothermal processes. The ore contains mainly Ce-La, Ta-Nb, Y, Y-Nd, Nd-Th group minerals. More than 15 RE and REE minerals are found in the ore deposits. Allanite, one of the Ce-La rich REE minerals belonging to the epidote group, is the most common mineral in the studied area. The allanite- bearing rocks may be devided into seven types by features of occurrence and mineral associations; zircon type (ZT), allanite-vein type (AT), feldspar type (KT), fluorite type (FT), quartz-mica type (QT), iron-oxide type (MT), and amphibole type (HT). The allanite veins (AT) and zircon rich rocks (ZT) contain the highest total REE contents. Differences in REE abundance can be interpreted in terms of varying portions of magmatic hydrothermal fluid. Petrographical and chemical data are presented for allanites which were collected from different types. The allanites show wide variations in optical properties, due in part to differences in their chemical composition (depending on the types) and to the degree of crystallinity of the individual specimens. Allanite metamicts in biotite are generally surrounded by well developed pleochroic haloes. Usually, allanite is accompanied by zircon and other REE-bearing minerals. CaO and total REE contents $({\sum}RE_2O_3)$ range from 9.29 to 18.79% and 11.66 to 26.31%, respectively. Also, SiO, (28.87~32.61%), $Al_2O_3$ (8.30~16.88%), and $Fc_2O_3$ (16.74~24.38%) contents show varying contents from type to type. The ${\sum}RE_2O_3$ of allanite has positive relationships with $Fe_2O_3$ and negative relaton with CaO, $SiO_2$, and $Al_2O_3$ Backscattered electron microscope images (BEl) of allanite shows that the its mineral composition and texture is very complex. The allanite-bearing hosts show distinct light REE enrichment with strong negative Eu anomaly except for HI. The HT has an almost flat REE distribution pattern with a small negative Eu anomaly. The chemical variation of the allanites with occurrences and mineral association can be related to condition of temperature and oxidation states in precipitation environment.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.602-607
• /
• 2003

We show three-dimensional distribution of voltages resulted from the leakage current originated from outdoor electrical facilities in a submerged area. In case these facilities are grounded by the neutral line multiple grounding method, the existence of ungrounded electrical facilities can cause a disastrous effect on near-by passengers. In order to investigate this situation, we installed a real-scale test field for the experiment type I (for the leakage current path between a enclosure grounded electrical facility and another enclosure grounded one), and that for the experiment type II (for the leakage current path between a enclosure grounded electrical facility and another ungrounded one). For both cases, we carried out three-dimensional monitoring of the voltage distribution while varying additional conditions such as the exposure of the underground cables and the finishing of cable connection part. The result shows that a disastrous effect on human safety can arise from the leakage current without a pertinent measure for the construction and maintenance of outdoor electrical facilities.

• 물과 미래
• /
• 제29권2호
• /
• pp.143-151
• /
• 1996

중간류 유출, 지표표화지역, 흙수분저류량들의 동적 반응을 Richards 방정식을 이용한 수치실험을 통하여 유도하였다. 그리고 수치실험에서 경사면 모양, 토양종류, 경계조건 등을 변화시켜서 지표포화지역-중간류유출 동적 관계 및 지표포화지역-흙수분저류량 동적 관계를 결정하였다. 모의결과에 의하면, 지표포화지역-중간류유출 동적 관계 및 지표포화지역-흙수분 저류량 동적 관계는 각 관계들의 정상류 관계에 의해 근사적으로 설명될 수 있다. 그리고 강우양상이 단순한 펄스입력일지라도 중간류유출 및 지표포화지역의 동적 반응은 중복첨두치에 의해 특징지어지며, 중복첨두치의 발생에 대한 물리적 메케니즘은 "variable source area"의 개념을 이용하여 설명하였다.용하여 설명하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.47-53
• /
• 2003

Screen filter of PDP TV plays an important role in satisfying the EMI/EMC specifications. Two types of filters, the mesh type and the sputter type, are used in PDP TVs, and this paper presents measurement results of the shielding effectiveness (SE) in the frequency range from 50MHz to 1GHz. Two methods were used for the measurement, one using network analyzer (NA) in an open area test site(OATS), and the other using the screen room. The overall conclusion is that the shielding effectiveness of the screen filter is related to the surface resistance of the screen filter. The mesh type screen filters are superior to the sputter types in the shielding effectiveness, which is varying with the frequency.

• 산업경영시스템학회지
• /
• 제24권69호
• /
• pp.51-64
• /
• 2001

A laboratory experiment was conducted to investigate the effects of working posture. work/rest ration, and task type on the physical workload in automobile assembly jobs. Ten healthy male university students participated as subjects in the experiment. East subject performed 18 experimental session with combination of 3 working posture 3 work/rest ratio and 2 task types. To examine the effect of various working conditions on workload, DMG analysis was performed on 4 different muscles in the neck an arm area, Also RPE scale and heart rate were taken as response variables. The result showed that all working conditions considered in the experiment had significant effects on the workload concluding that labor intensity in auto assembly jobs should be adjusted with respect to different levels of working posture, work/rest ratio, and task type. Detailed analysis are presented in the paper.