• 제목/요약/키워드: Area for passenger

검색결과 238건 처리시간 0.025초

2004년 서아시아 지진해일 현장조사: 안다만-니코바 제도 (Field Survey for 2004 West Asia Tsunami: Andaman and Nocobar Islands)

  • 조용식;손대희;김성민
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.579-582
    • /
    • 2006
  • 본 논문의 주요 목적은 2004년 12월 26일 발생한 서아시아 지진해일의 안다만-니코바 제도에서의 처오름높이를 현장조사하여 기록하는 것이다. 안다만-니코바제도에서는 지진해일로 약 1,925명이 사망하였으며, 5,555명이 실종된 것으로 보고되었다. 현장조사는 26개 지역에서 이루어졌으며, 최대 처오름높이는 리틀 안다만의 17.26m였으며, 포트블레어 지역은 해변에서 약 500m 지점까지 범람이 발생하였다.

  • PDF

후미추돌사고의 유효충돌속도가 차량손상 및 승차자 상해에 미치는 영향에 관한 연구 (A Study on the Effect of Delta-V Based on Vehicle Damages and Injuries Subjected by Rear-End Collisions)

  • 강성모;안병준
    • 한국안전학회지
    • /
    • 제23권2호
    • /
    • pp.72-80
    • /
    • 2008
  • In a case of an automobile collision, vehicle damage and injury of the driver and the passenger occur. The scale of the collision which is effected by the extent of vehicle damage and the injury of the passenger, depends on the delta-V. Based on the photograph interpretation o the actual case of accidents in the Seoul and the Incheon area, this study measured the depth of crush and calculated the delta-V. Through verifying the correlation of the depth of crush and the change of velocity, relative equation was evaluated and compared with the prior study results to prove that they are almost identical. Thus, the depth of crush can be used as an index of the degree of impact, which can be utilized as the change of velocity to evaluate the level of injury done to the passengers. However, the period of hospitalization and diagnostics claimed by the injured proves to have no correlation with the delta-V and the extent of vehicle damage, this is due to the non-objective way of diagnosis and the anamnesis of the injured. This study established the absolute limit harmlessness and the choosing limit harmlessness, allowing the appraisal for Yes or No of the injury or the harmlessness based on the prior studies. Moreover, utilizing the relative equation formed between the depth of crush and the delta-V, each case of collision was compared and evaluated in comparison to the limit harmlessness to prove that the 90.4% of the so-called 'claiming-to-be-injured' were exaggerating or fabricating.

UTIS를 활용한 수요 기반의 능동형 버스우선신호 제어 알고리즘에 관한 연구 (A Study on the Active Transit Signal Priority Control Algorithm based on Bus Demand using UTIS)

  • 홍경식;정준하;안계형;이영인
    • 대한교통학회지
    • /
    • 제29권6호
    • /
    • pp.107-116
    • /
    • 2011
  • 본 연구에서는 수도권을 중심으로 구축 운영 중인 UTIS를 활용하여 버스의 서비스 개선 및 운행 효율성을 증진함과 동시에 일반 차량의 지체를 최소화하기 위한 버스 수요 기반의 TSP 제어 알고리즘을 개발하였다. 이를 위해 버스의 수요를 기반으로 버스 우선신호의 우선권 강도를 조정하는 알고리즘을 제안하였으며, 주도로의 버스 우선권 제공으로 인한 부도로의 지체 증가를 막기 위해 부도로의 포화도에 따른 우선권 강도를 조정하는 보상 알고리즘을 제안하였다. 또한 연구 결과를 CORSIM RTE를 활용할 HILS 기반의 평가시스템을 통해 효과 분석하여 현장의 적용 가능성을 검증하였다. 시뮬레이션 결과 버스의 통행시간은 10% 정도 개선 효과가 있었으나, 이 경우 전체차량의 제어지체에는 큰 영향을 받지 않음을 확인하였다. 이러한 연구 결과는 국내의 대중교통 활성화 정책에 기여할 것으로 기대된다.

다차원척도법에 의한 서울주민의 교통수단선호 분석 (Multidimensional Scaling of User Preferences for the Transportation Modes in Seoul.)

  • 허우선
    • 대한교통학회지
    • /
    • 제4권1호
    • /
    • pp.12-27
    • /
    • 1986
  • This study examined user preferences toward transportation modes in Seoul. Two multidimensional scaling models, the ideal point and vector models, were applied to data on mode preferences of 114 adults in the metropolitan area. While both models produced fairly similar results, the vector model performed slightly better than the other in terms of interpretability of the results. The transport attributes elicited are comfort, flexibility, travel cost, travel time, privacy, and safety; among which comfort is salient most. The comfort variable is a multi-faceted attribute in nature. The variations of attribute preferences are most significant between the gender groups as well as worker/nonworker groups. In particular, male workers, female workers and female nonworkers form three distinctive market segments. An unidimensional scaling of the preference data reveals that subway, auto-driver, and subscription bus modes are preferred most, whereas motorcycle and bicycle least. The other modes of express bus, taxt, auto-passenger, bus and walk rank intermediately. An examination of how preference orders vary among modal groups hints that users align their stated attitudes to their choice in order to reduce cognitive dissonance.

  • PDF

승용차 후향거울 주위의 3차원 유동특성 해석 (A Study on Flow Analysis of Exterior Rear View Mirror of Passenger Car)

  • 정수진;김우승
    • 한국자동차공학회논문집
    • /
    • 제5권3호
    • /
    • pp.35-46
    • /
    • 1997
  • In order to satisfy customer's requirements of ride comfort and high performance, it is necessary for designers to fully understand vehicle aerodynamics and wind noise of newly produced cars because characteristics of flow and wind noise are heavily dependent on each other. In this study numerical and experimental study have been carried out to analyse the effect of flow characteristics at around of rear view mirror on wind noise and soiling on the front S/W. As a result, it's found that the spiral flow mear the front pillar is weakened and spreaded because rear view mirror obstructs the flow. It is also shown that there is abrupt change of gradient of separa- tion line, separation area, intensity of spiral flow and turbulent kinetic energy with varying shape of neck and housing of rear view mirror.

  • PDF

철도투자 효율성 향상을 위한 투자전략에 관한 연구 (A Study on the Investment Strategy that improves the Rail-infrastructure Investment Efficiency)

  • 김성;이종국;김윤양
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.1574-1586
    • /
    • 2008
  • Railway is the most effective transportation than any other traffic. But due to the its expensive maintenance fee and various components like roadbed, rail, rollingstock, electric and signal etc, the construction cost of the railway is usually higher than highway. Such a reason, a lot of cost and period are needed to complete the railway project. In addition that considering the decreasing of the SOC budget, the investment in the railway industry is getting hard than ever. This study analyzed the cost, term of work, freight & passenger transportation demand of the wide area railway electrification project and main line improvement project. And it compared the estimation value and real value of the projects like cost and period etc. And this study surveyed the economic feasibility including factors which are not considered in the feasibility study guide. With those results, This study suggest the project management and evaluation method to enlarge the efficiency of the railway construction project.

  • PDF

궤도 승용차 시스템의 적용 검토 (Study on the Application of Personal Rapid Transit System)

  • 최재혁
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
    • /
    • pp.31-38
    • /
    • 1998
  • Guideway Transportation will provide the break-through to solve the traffic problems, which a lot of big cities have over the world. APM (Automated People Mover) system, Guideway Transportation, is classified by PRT, GRT, and MRT according to the capacity of passenger to be carried by its system. In the Application of PRT (Personal Rapid Transit) system, the enact analysis of the traffic problem on the area to be applied should be preceded. PRT system is characterized by Off-Line and Demand Operation. The Network of PRT system depends on the Load Time and Load Pattern. The operation of PRT system will have move efficient way when it is applied to the network with evenly distributed Load Time and Load Pattern.

  • PDF

철도차량의 비선형 안정성에 영향을 미치는 인자 연구 (A Study on the Factors Influencing the Non-Linear Stability of Railway Vehicles)

  • 정우진;신정렬
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집B
    • /
    • pp.513-518
    • /
    • 2001
  • This research has been performed to estimate the hunting motion hysteresis of railway passenger cars. An old and a new car with almost same structure are chosen as analysis models. To solve effectively a set of simultaneous equations of motion strongly coupled with creep relations, shooting algorithm in which the nonlinear relations are regarded as a two-point boundary value problem is adopted. The bifurcation theory is applied to the dynamic analysis to distinguish differences between linear and nonlinear critical speeds by variation of parameters. It is found that there are some factors and their operation area to make nonlinear critical speed respond to them more sensitivity than linear critical speed. Full-scale roller rig tests are carried out for the validation of the numerical results. Finally, it is concluded that the wear of wheel profile and the stiffness discontinuities of wheelset suspension caused by deterioration have to be considered in the analysis to predict hysteresis of critical speed precisely.

  • PDF

고효율 항균 필터의 항균력 평가에 관한 연구 (A Study on Antibacterial Assesment of High Efficiency Antibacterial Air Filter)

  • 권혁구;정진도;류해열;정우성;박덕신
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2002년도 춘계학술대회 논문집
    • /
    • pp.549-554
    • /
    • 2002
  • Recently, interest in hygiene has been arouse in the health care field. Consequently, Filters with antibacterial agent applied to improve air quality by sterilizing bacteria, fungi, etc. We actually installed antibacterial air filter containing 2.5wt%Ag zeolite on the air intake route to air-conditioner in passenger cu, and evaluated filter's performance on antibacterial effect. By the microbe liquid spattering method, we found that the antibacterial air filter has notably sufficient antibacterial efficiency against standard strains and wild type strains. Antibacterial effect was observed at whole area of filter media by zone of inhibition test. The evaluation of microbe quantity was conducted through mixing dilution plate culture method. In comparison with ordinary filter, the amount of germs attached on antibacterial air filters was larger. The amount of germs attached on ordinary filters was very small since ordinary filters contained less dust. In comparison in antibacterial air filter with thickness, the amount of germs attached on 9mm filter was smaller than that of on 6mm filter. i.e. thicker filter, superior efficiency.

  • PDF

스폿용접된 자동차 차체용 알루미늄 박판의 피로균열진전의 파괴역학적 평가 (A fracture mechanics evaluation on the fatigue crack propagation at spot welded aluminum joint in passenger car body)

  • 박인덕;남기우;강석봉
    • 한국해양공학회지
    • /
    • 제11권3호
    • /
    • pp.20-28
    • /
    • 1997
  • The fatigue crack propagation properties and fatigue life of two kinds of Al body panel for automobile were examined experimentally by using the plate specimen and the single spot welding specimen. The fatigue limit of spot welding specimens was lower than that of a plate specimen. The fatigue limit was similar in two kinds of spot welding specimen. The shape and size of crack propagation were observed and measured on beach mark of fracture surface. The crack propagation of surface crack specimen showed almost same tendency to that of a thick plate as almost semi-elliptical. In spot welding specimen, the fatigue crack occurred in inside surface of nugget area was almost semi-elliptical. The crack growth rate can be explained using equation of stress intensity factors.

  • PDF