• 제목/요약/키워드: Area for passenger

검색결과 239건 처리시간 0.029초

A Computer Simulator to Assess the Operational Scenarios for the Personal Rapid Transit Systems

  • Lee, Jun-Ho;Lee, Jae-Ho;Kim, Yong-Kyu
    • International Journal of Railway
    • /
    • 제1권3호
    • /
    • pp.117-121
    • /
    • 2008
  • The personal rapid transit (PRT) system is a small scale transportation system that employs a novel concept to solve the traffic congestion problem in the city area. The PRT system is a driverless on-demand system that a passenger calls a vehicle rather than waits for the vehicle. Therefore, one of the most important issues in the PRT system is how to control the vehicle with the satisfaction of the basic concept of the PRT system. In this paper a computer simulator is introduced to evaluate the vehicle. operational control algorithm of the PRT system. The. computer simulator has the commercial embedded processor boards that operate in the real time operating system and pre-designed vehicle control algorithm is coded into the processor boards. The experimental results present the effectiveness of the proposed evaluation apparatus.

  • PDF

승용차 시트 쿨링 & 히팅 모듈의 구조 타당성 검증을 위한 유동 전산모사 (Flow Simulation for Structure Validation of Passenger Car Seat Cooling & Heating Module)

  • 고가진;박설현;마상동;김재열
    • 한국기계가공학회지
    • /
    • 제18권2호
    • /
    • pp.108-113
    • /
    • 2019
  • Due to the special structure of the car seat, the heating and cooling module must be installed in a limited area resulting in difficulty in regards to achieving optimal cooling and heating efficiency. In order to solve these problems, this paper establishes a new structure for heating and cooling modules, verifies the structural feasibility of the thermoelectric module for cooling and heating the seat through fluid simulations, and verifies the proper design of the mechanical components of the thermoelectric module.

세월호 증개축 전후 승선객의 피난성능 예측비교 (Comparative Study on Predictions of Passengers' Evacuation Performances Before and After the Remodelling of MV SEWOL)

  • 황광일
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권1호
    • /
    • pp.105-114
    • /
    • 2015
  • 여객선에서는 승선자의 안전이 가장 중요함에도 불구하고 국내에서는 인간의 피난행동특성을 반영한 피난성능에 관한 기준이 없다. 본 연구에서는 세월호 증개축 전후의 인적피난안전성을 비교 평가하고 이를 통해 현재 기준의 문제점을 도출하고자 하였다. 연구성과를 정리하면 다음과 같다. 첫째, 증개축 전후의 소집장소 면적은 동일하였고, 이 면적은 모두 국내 관련 기준을 만족하는 것으로 평가되지만, 인간의 행동특성을 반영한 인적안전피난시뮬레이션 툴을 활용하면 소집이 불가능한 것으로 판단된다. 둘째, 증개축 전후 선내 공간구성에 대해 각 선실에서 퇴선까지의 피난소요시간예측 시뮬레이션을 50회씩 수행한 결과 힐링각 $0^{\circ}$ 경우에는 모두 SOLAS의 허용기준이내이므로 승객 전원이 충분히 피난할 수 있을 것으로 평가되지만, 힐링각이 $20^{\circ}$인 긴급한 상황에서 피난을 개시할 경우에는 모두 SOLAS의 주간기준은 만족하지만, 야간기준은 만족하지 못하는 것으로 예측되었다. 모든 경우에서 증축 후인 세월호의 피난시간 확률분포가 Naminoue호의 피난시간 확률분포보다 분산되어 있는데 이는 증축후 피난환경이 열악해졌다는 의미이다.

선박의 경사 및 동요효과가 탈출승객의 이동성에 미치는 영향 (The Effect on the Mobility of Evacuating Passengers in Ship with Regard to List and Motion)

  • 김홍태;이동곤;박진형;홍승권
    • 산업공학
    • /
    • 제17권1호
    • /
    • pp.22-32
    • /
    • 2004
  • The most complicated and difficult area in the simulation of evacuation process is the area of human behavior. However, it is generally very difficult to understand and quantify human behaviors since the factors involved vary significantly according to the types of accidents and the environment. The walking speed of passenger is especially affected by dynamic effect and list due to damage and ship motion in wave. There are various methods to get the useful data for evacuation simulation. The onboard experimental approach is one of the strongest method. This paper discusses the onboard experimental results of human mobility of passengers in evacuation from ship. To realize ship trim and heel due to maritime casuality, the passage model for experiment is made. The experiment was carried out at dynamic and static condition respectively using the ship with passage model. The result was evaluated and it will be reflected in evacuation simulation tool.

LoRaWAN을 이용한 선박 내부 격벽통과 신호의 특성 및 거리에 따른 수신율 분석 (Through-the-inner Bulkhead Signal Characteristics and Distance based Analysis on Receiving Rate using LoRaWAN)

  • 박문수;오정수
    • 한국멀티미디어학회논문지
    • /
    • 제23권2호
    • /
    • pp.255-261
    • /
    • 2020
  • As the accidents of cargo and passenger carrying ships occur, the stress faced by the vessel users is increasing. The risk factors for accident deterioration in remote marine area are stronger than those in road accidents, and therefore the need for safety control is greatly emphasized. To overcome such issue, a lot of effort has been made in terms of conducting research and development of the passengers and freights location tracking system. However, the inner bulkhead structures are made of aluminum/steel which is a difficult material to transfer location information through. This study aims to measure the receiving rate of LoRaWAN signal inside the aluminum/steel bulkhead structures with variation in reception strength and distance. The test was taken place at platforms with 6T and 8T enclosures to reflect the same conditions found in fishery patrol boats. The receiving rate of through-the-wall communication at 10M distance turned out to be 86% in case of using two 6T enclosures, and 73% in case of using one 8T enclosure. The result showed that the receiving rate was more affected by the thickness rather than the number of enclosures.

Set Covering 이론을 이용한 시내버스 최적노선망 구축에 관한 연구 (A Study on the Optimal Urban Bus Network Design Using the Set Covering Theory)

  • 이승재;최재성;백혜선
    • 대한교통학회지
    • /
    • 제17권2호
    • /
    • pp.137-147
    • /
    • 1999
  • 지금까지 시내버스 노선계획에 관한 대다수의 연구는 개별노선에 대한 지엽적인 분석을 바탕으로 하고 있으나 본 연구에서는 각 노선의 개별적 고려가 아닌 네트워크 차원의 최적화를 위한 노선계획 방법론을 제시하였다. 본 연구에서 제시하는 방법론은 계획가적 관점에서 버스이용자를 포함한 모든 통행자는 최단경로로 통행하기를 희망한다는 기본 전제하에 각 기종점의 최단경로로 구성된 대안 노선망을 도출하고 matrix 형태의 집합개념을 도입한 Set Covering 이론을 적용하여 노선공급수준을 축소하였다. 또한 노선축소과정에서 지금까지 부수적 통행요소로 인식되어온 환승을 활용하여 통행수요를 만족하는 최소규모의 노선망을 도출하였다. 본 연구는 고정수요를 가정하는 기존 연구와 달리 통행자 행태를 반영한 최적 노선망을 도출하기 위하여 시내버스 노선망 대안에 대한 가변수요를 구현하였다. 따라서 본 연구를 통하여 자가용이용자와 버스이용자로 구성된 전체 네트워크의 통행비용을 최소화하며 서비스 제공규모를 최소화하는 최적 시내버스 노선망을 도출하였다. 연구결과 기존연구와 비교하여 서비스 공급수준을 축소할 뿐 아니라 통행자의 행태를 고려한 해를 도출함으로써 현실성을 제고하였다.

  • PDF

FEM을 이용한 Belt Width와 Separation에 관한 연구 (A Study on the Belt width and Separation of Tire using FEM)

  • 김성래;성기득;김선주;조춘택
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.2006-2010
    • /
    • 2005
  • This study is concerned with the relation between steelbelt and belt edge separation. Belt edge separation causes tire burst and threatens passenger's safety. For that reason, it is important to predict durability caused by belt edge separation first in tire structure design step. In this study, to predict belt edge separation, we suggest the prediction method of belt edge separation and evaluate the effect of steelbelt width on the belt edge separation using FEM. We study on analysis parameter also to do exact estimation about the shear behaviour of belt edge area.

  • PDF

철도승강장 모니터링을 위한 스테레오카메라 개발연구 (Development of Stereo Camera for Railway Platform Monitoring)

  • 원종운;오세찬;김길동
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.293-293
    • /
    • 2010
  • In this paper, we propose a stereo vision based monitoring concept for passenger's safety on railroad platform. In general, basic concept of stereo image processing technique uses the correlations between left and right images, and extracts additional distance information. It provides easy removal of ambient illumination changes, which has been difficult to achieve with conventional 2D based image processing technique. In the paper, we present developed stereo camera and stereo vision based detection algorithm in order to monitor possible accidents at platform area, and verified the detection performance of proposed system with experimental results.

  • PDF

산란을 고려한 수중 프로펠러 소음해석 (Prediction of Marine Propeller Noise Considering Scattering Effect)

  • 김종도;홍석윤;송지훈
    • 한국소음진동공학회논문집
    • /
    • 제21권5호
    • /
    • pp.468-474
    • /
    • 2011
  • Underwater radiated noises from marine vehicles are mostly due to the propulsion systems. Recently, the propeller noise problems are becoming crucial issues in terms of habitability of passenger ships. Especially in military area, propeller noise is directly related to the survivability of submarines and warships, and thus propeller noise analysis and reductions are very important. Generally, propeller noise can be classified into non-cavitating noise and cavitating noise which is dominant. In this paper the methodology of propeller noise analysis is announced and new approach to consider scattering effect is proposed. Unsteady blade surface pressure and sheet cavity volume analyzed with potential based panel method are used as noise source.

Scattering 을 고려한 수중 프로펠러 소음해석 (Prediction of marine propeller noise with scattering effect)

  • 김종도;홍석윤;송지훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2011년도 춘계학술대회 논문집
    • /
    • pp.475-481
    • /
    • 2011
  • Underwater radiated noises from marine vehicles are mostly due to the propulsion systems. Recently, the propeller noise problems are becoming crucial issues in terms of habitability of passenger ships. Especially in military area, propeller noise is directly related to the survivability of submarines and warships, and thus propeller noise analysis and reductions are very important. Generally, propeller noise can be classified into non-cavitating noise and cavitating noise which is dominant. In this paper the methodology of propeller noise analysis is announced and new approach to consider scattering effect is proposed. Unsteady blade surface pressure and sheet cavity volume analyzed with potential based panel method are used as noise source.

  • PDF