• 제목/요약/키워드: Area for passenger

검색결과 238건 처리시간 0.026초

대피선 설치를 통한 수도권 광역철도 급행화 방안 (Mixed Operation with Express Train for Urban Railways in Seoul Metropolitan Area)

  • 손기민
    • 대한교통학회지
    • /
    • 제25권5호
    • /
    • pp.195-207
    • /
    • 2007
  • 수도권 광역통행의 과다한 승용차 이용은 서울시 교통문제의 핵이다. 시계 도로망의 혼잡과 더불어 도시내부로 유입된 승용차가 유발하는 2차 통행도 심각하므로 광역 승용차 통행을 줄이는 것이 시급하다. 이러한 문제를 해결하는 가장 효과적인 방안중 하나는 광역철도의 경쟁력 제고이다. 광역철도와 승용차를 비교해보면 대부분 수도권 지역에서 철도의 통행시간이 승용차를 초과하는 실정이다. 본 연구는 광역철도가 통행시간에 대한 경쟁력을 갖게 하기 위한 방안으로 대피선 설치를 통한 급행열차 도입을 제안한다. 급행과 완행열차의 혼합운행은 매우 정교한 기술적 검토를 요구하며 실질적인 운행방안의 제시가 필요하다. 본 연구에서는 급행열차에 대한 운전선도를 시뮬레이션하고 급완행 열차의 교행 패턴을 도출하는 스케쥴 작성 알고리즘을 제시하고 안산선을 대상으로 가상 적용 사례를 제시한다. 시뮬레이션 결과, 안산선의 경우 $1{\sim}2$개의 신규 대피선 설치를 통해 급행열차의 표정속도를 63kph 까지 향상시킬 수 있음을 입증한다.

평택당진항의 갈등 원인과 거버넌스 접근을 통한 해결방안 (Governance-Based Measures to Solve the Conflicts in Pyeongtaek-Dangjin Port)

  • 이동현
    • 한국항만경제학회지
    • /
    • 제29권3호
    • /
    • pp.135-158
    • /
    • 2013
  • 평택당진항은 매립지 관할권, 국제여객터미널 건립, 연육교 건설 등 주요 사안에서 해양수산부, 경기도, 충청남도, 평택시, 당진시, 아산시 등의 의견이 갈려 갈등이 일어나고, 심각한 경우에는 법적 분쟁으로까지 이어지고 있다. 이와 같은 갈등의 원인을 거버넌스 차원에서 해석하면 2가지 문제점이 지적될 수 있다. 첫째, 현행 평택당진항의 거버넌스 구조는 참여주체 간, 이해관계자 간 충돌 및 분쟁 가능성이 높은 구조로 되어 있다. 둘째, 현행 평택 당진항의 거버넌스 구조는 평택당진항의 미래 발전을 책임지고 이끌어갈 수 있는 주도기관의 부재가 중요한 문제점으로 거론된다. 이에 따라 충돌가능성을 저하하고, 주도기관이 존재하는 거버넌스를 설립하는 것이 무엇보다 중요하다. 충돌가능성을 저하하는 방안으로는 갈등조정기구의 설치, 항만개발 및 운영에 관한 사실관계 및 관련 법규의 명확화, 이해관계자 간 교류의 활성화 등이 제시되었다. 주도기관을 설립하기 위한 거버넌스 도입 방안은 단일 거버넌스의 도입, 평택당진항 항만공사(PA)의 신설, 중앙-지방 연합형 거버넌스의 도입, PA에 대한 실질적인 권한의 전면 부여 등이 검토되었다.

해양기상부이 관측자료를 이용한 풍랑특보의 적절성 평가 (Evaluation of the Appropriateness of High Wind Wave Alert by Comparing the Marine Meteorological Observation Buoy Data)

  • 강민균;설동일
    • 한국항해항만학회지
    • /
    • 제46권1호
    • /
    • pp.11-17
    • /
    • 2022
  • 풍랑특보는 우리나라 부근을 항행하는 선박 및 해상 업무 종사자에게 큰 영향을 미친다. 이 연구에서는 최근 11년(2010-2020년) 동안 기상청에서 발표한 서해·남해·동해의 앞바다 및 먼바다의 풍랑특보와 주요 해양기상부이의 관측자료를 비교·분석하여 풍랑특보의 적절성을 평가하였다. 각 해역에 대한 풍랑특보와 해양기상부이 관측자료를 일별, 월별, 연별로 통계를 내어 연평균, 월평균, 계절별로 비교한 결과, 풍랑특보의 적중률이 전 해역에 걸쳐 매우 낮았으며, 특히 남해 앞바다와 제주도 앞바다의 적중률은 겨울에 가장 낮은 것으로 분석되었다. 해상에서의 풍랑특보가 어선의 어업활동, 여객선 운항 및 관광, 해상 레저활동 등에 미치는 영향을 고려할 때 해양기상 예·특보의 정확성을 개선할 필요가 있음을 확인하였다.

순차적 반응표면법을 이용한 상용 트럭 아마추어 코어 경량화 설계 (Light Weight Design of the Commercial Truck Armature Core using the Sequential Response Surface Method)

  • 이현택;김호경;박상준;정영구;홍석무
    • 소성∙가공
    • /
    • 제32권1호
    • /
    • pp.12-19
    • /
    • 2023
  • The armature core is a part responsible for the skeleton of the steering wheel. Currently, in the case of commercial trucks, the main parts of the parts are manufactured separately and then the product is produced through welding. In the case of this production method, quality and cost problems of the welded parts occur, and an integrated armature core made of magnesium alloy is used in passenger vehicles. However, in the case of commercial trucks, there is no application case and research is insufficient. Therefore, this study aims to develop an all-in-one armature core that simultaneously applies a magnesium alloy material and a die casting method to reduce the weight and improve the quality of the existing steel armature core. The product was modeled based on the shape of a commercial product, and finite element analysis (FEA) was performed through Ls-dyna, a general-purpose analysis program. Through digital image correlation (DIC) and uniaxial tensile test, the accurate physical properties of the material were obtained and applied to the analysis. A total of four types of compression were applied by changing the angle and ground contact area of the product according to the actual reliability test conditions. analysis was carried out. As a result of FEA, it was confirmed that damage occurred in the spoke area, and spoke thickness (tspoke), base thickness (tbase), and rim and spoke connection (R) were designated as design variables, and the total weight and maximum equivalent stress occurring in the armature core We specify an objective function that simultaneously minimizes . A prediction function was derived using the sequential response surface method to identify design variables that minimized the objective function, and it was confirmed that it was improved by 22%.

건축물 연면적에 따른 노상·노외 주차수요 산정 모형 구축 (Establishment of a Estimation Model of On-Road and Off-Road Parking Demand Based on the Total Floor Area of Buildings)

  • 남제모;이영우
    • 한국ITS학회 논문지
    • /
    • 제22권2호
    • /
    • pp.44-53
    • /
    • 2023
  • 최근 충분한 주차공간 확보의 어려움으로 심각한 주차문제가 발생하고 있으며 또 다른 교통문제나 사회문제로 이어지기도 한다. 일정 범위 이상의 지역·지구에서 발생하는 주차문제를 해결하기 위해서는 지역특성을 반영한 노상 및 노외주차장에 대한 연구가 필요하며 본 연구에서는 지역·지구의 특성을 고려한 노상 및 노외주차 공급 정책을 수립하는데 기초 연구로 활용하기 위한 주차수요 산정모형을 구축하였다. 연구수행을 위해 대구광역시 동구를 행정동으로 구분하여 주차시설, 주차수요를 조사하였다. 조사시간은 평일에 주간과 야간으로 구분하였으며 차종은 승용차 소형트럭·버스, 대형트럭·버스 3종으로 구분하였다. 주차수요 산정을 위한 설명변수로 단독주택, 공동주택, 근린생활시설, 문화·집회시설, 업무시설, 판매시설 등 6가지의 용도별 건축물 연면적을 사용하였다. 상관분석 결과 6가지 설명변수 중 근린생활시설의 연면적이 노상 및 노외 주차수요와 유의미한 상관관계를 나타내었다. 근린생활시설의 연면적을 설명변수로 하여 회귀분석 모형을 구축하였고 통계적으로 유의미한 결과를 얻었다.

CHANGE OF CATALYST TEMPERATURE WITH UEGI TECHNOLOGY DURING COLD START

  • CHO Y.-S.;KIM D.-S.
    • International Journal of Automotive Technology
    • /
    • 제6권5호
    • /
    • pp.445-451
    • /
    • 2005
  • Most of the pollutants from passenger cars are emitted during the cold-transient phase of the FTP-75 test. In order to reduce the exhaust emissions during the cold-transient period, it is essential to warm up the catalyst as fast as possible after the engine starts, and the Unburned Exhaust Gas Ignition (UEGI) technology was developed through our previous studies to help close-coupled catalytic converters (CCC) reach the light-off temperature within a few seconds after cold-start. The UEGI system operates by igniting the unburned exhaust mixture by glow plugs installed upstream of the catalyst. The flame generates a high amount of heat, and if the heat is concentrated on a specific area of monolith surface, then thermal crack or failure of the monolith could occur. Therefore, it is very important to monitor the temperature distribution in the CCC during the UEGI operation, so the local temperatures in the monolith were measured using thermocouples. Experimental results showed that the temperature of CCC rises faster with the UEGI technology, and the CCC reaches the light-off temperature earlier than the baseline case. Under the conditions tested, the light-off time of the baseline case was 62 seconds, compared with 33 seconds for the UEGI case. The peak temperature is well under the thermal melting condition, and temperature distribution is not so severe as to consider thermal stress. It is noted that the UEGI technology is an effective method to warm up the catalyst with a small amount of thermal stress during the cold start period.

AIS 데이터를 활용한 제주지역 VTS 관제구역 설정 (Setting Up of VTS Areas Around Jeju Using AIS Data)

  • 유상록;김광일
    • 한국항해항만학회지
    • /
    • 제46권3호
    • /
    • pp.209-215
    • /
    • 2022
  • 제주 연안은 국제크루즈선, 여객선, 유 도선 등의 통항이 빈번하고 조업 어선이 많아 해양사고 위험성이 높고 선박 충돌사고가 빈번히 발생하고 있다. 이에 따라 제주 연안 해역을 통항하는 선박의 체계적인 안전관리를 위해 연안 VTS 구축이 시급하다. 본 연구의 목적은 신설될 제주지역 연안 VTS의 관제구역을 설정하고자 한다. 관제사의 업무부하를 측정하기 위해 관제대상 선박과 비관제대상 선박에 대한 모니터링 빈도 및 소요시간 등을 고려한 모니터링 업무량과 선박충돌 조우상황 등에 대한 관제업무량을 반영한 산정식을 설계하여 신설될 제주지역 VTS의 각 관제섹터에 적용하였다. 각 VTS 센터에 3개의 관제섹터를 설정하였으며, AIS 데이터 한 달 치를 이용하여 시간당 평균 관제석을 분석한 결과, 1석 내외로 나타나 섹터간 구획 획정은 적절하여 관제사의 업무부하는 없는 것으로 나타났다. 본 연구에서 제안한 방법은 현재 운영 중인 VTS의 적정 관제석 산출 및 향후 신설될 연안 VTS의 관제구역 설정 등에 기초자료로 활용할 수 있을 것으로 기대된다.

내항선 안전관리강화를 위한 해사안전감독관 제도 개선 연구 (A Study on the Improvement of the Maritime Safety Supervisor System for the Reinforcement of Coastal Ship Safety Control)

  • 이석말
    • 해양환경안전학회지
    • /
    • 제24권1호
    • /
    • pp.43-55
    • /
    • 2018
  • 세월호 사고 이후 내항선 안전관리분야에서의 가장 큰 변화는 해사안전감독관 제도의 도입이라 할 수 있다. 이 제도의 도입으로 내항여객선의 안전관리는 운항관리자와 해양경찰로부터 운항관리자와 새로이 도입된 해사안전감독관으로 변경되었다. 또한 내항화물선의 안전관리도 선박검사관으로부터 해사안전감독관과 선박검사관에 의한 안전관리의 체계로 전환되었다. 그러나 새로이 도입된 이 제도는 전문임기제에 따른 감독관의 신분상의 불안으로 인한 업무연속성 부족, 감독대상의 현실을 무시한 감독관의 자격요건 설정, 내항화물선에 대한 심사와 지도 감독기관의 분리로 인한 업무혼선 및 감항성 확보를 위한 항행정지 개선명령 분야의 한계 등에 대한 문제점이 여전히 남아 있다. 내항선의 안전관리를 보다 강화하기 위해서는 내항선 안전관리 업무를 실질적으로 수행하고 있는 해사안전 감독관 제도의 정착이 필수적이라 아니할 수 없다. 따라서 이러한 문제점을 개선하기 위해서는, 내항화물선에 대해서 통합된 단일기관에 의한 체계적인 안전관리가 이루어져야 하며, 전문임기제인 감독관의 신분상의 제약에 대한 개선이 동시에 이루어져야 한다. 또한 항행정지 개선명령의 분야를 확대하고, 선장 기관장 및 국제선급의 검사원 경험자 위주로 감독관의 자격을 강화해서 보다 체계적이고 실질적인 내항선의 안전관리가 되도록 해야 할 것이다.

실습선 가야호의 선체진동에 대한 승선환경 (Boarding environment of training ship KAYA for the hull vibration)

  • 김민선;신현옥;김민석;한진석
    • 수산해양기술연구
    • /
    • 제45권1호
    • /
    • pp.46-55
    • /
    • 2009
  • To compare and evaluate the suitability and comfort levels of the environment on board a stern trawl training ship, KAYA(GT: 1737 tons, Pukyong National University), with the international standardization guide ISO 6954:2000(E), measurements of the hull vibration on accommodation areas and working areas of the training ship from July 8 to July 10, 2008 were completed upon KAYA's linear sea route. The vibrations along the z-axis were measured with the use of a 3-axis vibration level meter, which included a marine vibration card. Results show accelerations of the vibrations on the passenger's accommodation area to be 42.0-115.8(average: 78.0, standard deviation(SD): 21.0) mm/$s^2$, which is largely below the permissible upper limit, but 75 % of the observation points exceeded the permissible lower limit of 71.5 mm/$s^2$, indicating a comfortable environment. The accelerations of the vibration in a frequency of 10-24Hz lowering the visual performance were measured at 2.5-12.0(average: 7.6, SD: 3.1) mm/$s^2$. The crew s accommodation area experienced vibration accelerations of 42.9-82.3(average: 93.1, SD: 53.1) mm/$s^2$, which is generally below the permissible upper limit of 214.0 mm/$s^2$, and 62.5% of the observation points did not exceed the permissible lower limit of 107.0 mm/$s^2$, denoting a level of comfort. The acceleration of the vibration in a frequency of 10-24Hz were 4.7-28.3(average: 12.4, SD: 8.8) mm/$s^2$. On the crew s working area the accelerations were measured at 86.9-153.9(average 119.3, SD 18.0) mm/$s^2$. These values were generally below the permissible upper limit of 286.0 mm/$s^2$ and only 12.5% of the observation points did not exceed the permissible lower limit of 143.0 mm/$s^2$, the level at which a high level of comfort is maintained. The accelerations in frequency of 10-24Hz and 30Hz were 9.1-29.8 (average 13.8, SD= 4.5) mm/$s^2$ and 8.9-13.7 (average 11.8, SD 2.1) mm/$s^2$, respectively. In conclusion the boarding environment of the training ship was good in general although an improvement of the vibration condition partially needed on the crew s accommodation area near the engine room.

MaaS의 다양한 공공교통수단 연계에 따른 구현 방안 (Implementation Plan of MaaS according to Various Public Transport Links)

  • 서지영;이선하;천춘근;이은호
    • 한국ITS학회 논문지
    • /
    • 제17권2호
    • /
    • pp.73-86
    • /
    • 2018
  • 개인 승용차의 증가로 인해 다양한 교통문제가 발생하고 있다. 이에 따른 교통문제를 해결할 수 있도록 개인 승용차의 이용을 줄이고 대중교통 활성화를 위한 MaaS(Mobility as a Service)의 국내 외 연구가 진행 중이다. 본 연구에서는 카쉐어링, 공공자전거 정보를 통해 이용자들에게 교통수단간 환승을 고려한 최적경로를 Simulation을 통해 구현하고자 하며, 연계된 교통수단을 통해 이용가능한 경로의 효과분석을 하고자 한다. 분석 대상지는 다양한 광역 교통망으로 설계된 세종특별자치시로 선정하였으며, 분석 결과로는 기존 경로는 대중교통(버스, 지하철)으로만 이용 경로가 도출되나 카쉐어링과 공공자전거를 활용해 최종 목적지까지 효율적으로 통행할 수 있는 경로가 분석되었다. 다양한 교통수단 이용정보 및 위치기반 서비스를 스마트폰 Application에 도입할 시 이용자들에게 매우 유용한 정보를 제공할 수 있으며, 향후 교통체증과 환경문제 등 사회적 문제 해결에 도모할 수 있을 것으로 기대된다.