• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1276-1285
• /
• 2015

Full-duplex communications have emerged as a key technology for next-generation wireless local area networks (WLANs). Although the key enabling technology for full-duplex communications is the self-interference cancellation (SIC) technique in the physical layer, the employment of full-duplex communications has huge potentials to substantially increase the throughput at the medium access control (MAC) layer. At the same time, full-duplex communications pose non-trivial challenges to the MAC protocol design. In this article, we first identify salient problems in supporting full-duplex communications in WLAN MAC protocols. After that, we survey the state-of-the art to address those problems and analyze their pros and cons. Finally, we present open research challenges to improve the effectiveness of full-duplex communications in WLANs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.165-173
• /
• 2010

WMN(Wireless Mesh Network) is an wireless backbone network technology that is an easily configurable network in the low cost compared to the wireless LAN(Local Area Network). Most of the previous researches have evaluated their algorithms by the simulations rather than by the implementation. There exist some implementation papers, however, they have the limitations of the flexibility on the link establishment and the link quality utilization. Consequently, the benefit of the WMN - configuration flexibility is degraded and the performance deterioration occurs in the multi-hop wireless environment. In this paper, we introduce a Linux-based link layer Wireless Mesh Routing System - WBMR. The design and implementation of WBMR provides the dynamic link establishment and the effective multi-channel usage. We have modified the ntroof the original WLAN operation for the dynamic link establishment, and the Linux bridge for the link layer routing. The result of performance evaluation verifies that our WBMR supports fast self-configuration and increases data transmission throughput compared to the other researches of the wireless multi-hop environment.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.761-766
• /
• 2018

Droplet-based microfluidic device has led to transformational new approaches in various applications including materials synthesis and high-throughput screening. However, efforts are required to enhance the production rate to industrial scale because of low production rate in a single droplet generator. In here, we present a method for enhancing production rate of monodisperse droplets via parallelization of flow-focusing generators. For this, we fabricated a three-dimensional monolithic elastomer device (3D MED) that has the 3D channel structures in a single layer, using a double-sided imprinting method. We demonstrated that the production rate of monodisperse droplet is increased by controlling the flow rate of continuous and dispersed phases in 3D MED with 8 droplet generators. Thus, we anticipate that this microfluidic system will be used in wide area including microparticle synthesis and screening system via encapsulation of various materials and cells in monodisperse droplets.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.31-36
• /
• 2005

In this paper, we propose a new optical switching system as a infrastructure of the BcN, in which the high traffic volume will be expected due to the multimedia service, like P2P services. Because the JET protocol, the most popular protocol in OBS (Optical Burst Switching) research area, has high blocking probability for burst, it prevents commercialization in real network for its low throughput in TCP layer. To improve high blocking rate in OBS network, we segment large network into small network and perform burst scheduling to avoid burst loss. By using proposed scheme, Internet provider can reduce network deployment cost in Metro network as well as large mesh core networks

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.1-8
• /
• 2004

A simple AMC (Adaptive Modulation and Coding) technique using ARQ (Automatic Repeat Request) for a MIMO (Multiple Input Multiple Output) system is proposed which does not require the additional feedback. In addition, the proposed AMC technique is different from the conventional technique in the aspect of considering the MCS (Modulation and Coding Scheme) level from the previous packet. The proposed technique can discard fewer amounts of unsuitable packets than the conventional technique. In the proposed system not only same rate control method for transmit antennas but also individual rate control method can be applied. The performance of the proposed technique is verified under a MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system based on WLAN (Wireless Local Area Network), IEEE 802.11a. The results of the computer simulation show that a MIMO system with the proposed technique achieves higher throughput than one with a fixed transmission rate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.9-19
• /
• 2004

WLAN (Wireless Local Area Networks) needs error recovery and flow control schemes to support reliable multicast protocol. Limited wireless bandwidth, as well as queuing losses caused by the asymmetric wired/wireless interactions, demands more effective approaches for reducing packet losses. Moreover, since the wireless channel is a shared broadcast medium, if sender receives feedback information simultaneously from several receivers, the feedback delays data frame transmission of forward direction by introducing channel congestion and burden at the sender. Therefore, it is important to minimize the amount of feedback information from receivers. In this paper, we propose an ARS(Adaptive Redundancy Scheme) that combines FEC(Forward Error Correction) using channel state estimation and ARQ(Automatic Repeat Request) both to reduce the amount of feedback information and the number of retransmissions and to guarantee high data reliability in a WLAN multicast environment. Performance of the proposed scheme is evaluated by means of analysis and simulations in AWGN and Rayleigh fading channels. The results show that the proposed scheme reduces the amount of feedback information and the number of retransmissions and guarantees high data reliability, while keeping throughput efficiency similarly with the conventional FEC and ARQ scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.796-804
• /
• 1992

This paper presents a design of a backbone network which uses a rigister-Insertion ring structure, The introduction of a high speed register in sertton backbone ring enables high performance inter-network 4ommunicatlons In a simple and modular structure at low cost and Its concurrent communications.. Two or more bridge nodes can be used to construct a register Insertion backbone ring network. The high bandwidth of the backbone ring sup ports heavy traffic for Inter-segment Eornrnunicatlons. The bridge node does both local address filtering to block data entering the ring and remote address filtering to block data entering the local LAN segment . Title local address greatly reduces the rate on the backbone ring and the remote address filterlng greatly reduces the traffic rate on each LAN segment. An feature makes the network the network reconflguratlon simpler and transparent to users. A throughput analysis Is used to deterrune the bandwidth of the backbone rlr)g transmission medium.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.387-396
• /
• 2016

Multiuser communication has been an important research area of underwater acoustic communications and networking. This paper studies the use of adaptive orthogonal frequency-division multiple access (OFDMA) in a downlink scenario, where a central node sends data to multiple distributed nodes simultaneously. In practical implementations, the instantaneous channel state information (CSI) cannot be perfectly known by the central node in time-varying underwater acoustic (UWA) channels, due to the long propagation delays resulting from the low sound speed. In this paper, we explore the CSI feedback for resource allocation. An adaptive power-bit loading algorithm is presented, which assigns subcarriers to different users and allocates power and bits to each subcarrier, aiming to minimize the bit error rate (BER) under power and throughput constraints. Simulation results show considerable performance gains due to adaptive subcarrier allocation and further improvement through power and bit loading, as compared to the non-adaptive interleave subcarrier allocation scheme. In a lake experiment, channel feedback reduction is implemented through subcarrier clustering and uniform quantization. Although the performance gains are not as large as expected, experiment results confirm that adaptive subcarrier allocation schemes based on delayed channel feedback or long term statistics outperform the interleave subcarrier allocation scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.202-208
• /
• 2015

A wireless ship area network is required to configure and control various sensors and electrical instruments embedded or boarded in a ship. In such environment, wireless communication protocol adopting relaying function is needed because direct link or communication between two nodes is hardly guaranteed due to spatial constraints in a ship. In this study, we introduce and analyze a WiMedia Distributed MAC (D-MAC) based approach considering throughput and energy constraint of wireless communication module. Performance evaluation results demonstrate that the relay-based wireless communication protocol improves reliability of wireless communication network in a ship.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3C
• /
• pp.255-263
• /
• 2010

In this paper, we present an efficient cooperative transmission scheme for high speed 60GHz WPAN system. In 60GHz, the cooperative transmission with relay is effective scheme because signals are exceedingly attenuated according to the distance and the transmission is impossible when there is no LOS between transmitter and receiver. Moreover, the reliability of signal in destination can be improved by receiving data from a relay as well as a transmitter. However, the overall data rate is reduced because transmission time is more required for relay. To solve this problem, we propose a cooperative transmission scheme with RS-CC serial concatenated codes. In the proposed cooperative transmission scheme, the relay can reduce the transmission data size because the only parity bits of systematic RS code are transmitted after encoding by CC. But the computational complexity is increased at the relay and the destination.