• Journal of the Korean housing association
• /
• v.16 no.2
• /
• pp.1-10
• /
• 2005

The purpose of this study is providing useful information for consumer-friendly house plan by investigating remodeling apartments according to the area type and size. In order to achieve this aim, case study was applied. The case study was conducted of five small, medium, and large size apartments through depth-interviews, actual survey, and questionnaires on the remodeling behavior, interior design, and interior atmosphere. The results of the study are as follows: Structural alterations were frequent in communal area, and then in private and household areas. Changing lighting fixtures was frequent in all area types, and especially, in communal areas installing extra decoration was frequently observed. Besides, alterations of doors and window frames were carried out in communal, private, housework and service areas by using wood, aluminum sashes, double-glazing, and paint coating. Finally, in housework areas the material and color of counters were changed into wooden and achromatic.

• Journal of the Korean housing association
• /
• v.13 no.3
• /
• pp.45-53
• /
• 2002

The purpose of this study is to examine the characteristics of unit plans in the high-rise mixed-use condominium and to provide the data fur architectural planning and design. The tools of statistical analysis are frequency, percentage, mean, cross-tab, and correlation. The results of this study are as fellows; The most frequently found shape of unit is a deformed polygon. The common rooms in housing units are dressing room, powder room, offset-kitchen, family room, passage, hallway, and foyer. The specially prepared spaces are wash room, home bar, independent porch, and garden. As to room size and area ratio in a dwelling unit, those of living room are biggest and highest irrespective of unit size. As the floor area of unit increases, does the size of each room and space but the area ratio of each room decreases. This research is made to develop an Apartment Information System. This integrated information system is to be designed to provide residents of high-rise mixed-use condominiums with convenient, economical, and safe life.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1241-1245
• /
• 2009

As FFT(Fast Fourier Transform) processor is used in OFDM(Orthogonal Frequency Division Multiplesing) system. According to increase requirement about mobility and broadband, Research about low power and low area FFT processor is needed. So research concern in reduction of memory size and complex multiplier is in progress. Increasing points of FFT increase memory area of FFT processor. Specially, SRU(Signal Reordering Unit) has the most memory in FFT processor. In this paper, we propose a reduced method of memory size of SRU in FFT processor. SRU of 64, 1024 point FFT processor performed implementation by VerilogHDL coding and it verified by simulation. We select the APEX20KE family EP20k1000EPC672-3 device of Altera Corps. SRU implementation is performed by synthesis of Quartus Tool. The bits of data size decide by 24bits that is 12bits from real, imaginary number respectively. It is shown that, the proposed SRU of 64point and 1024point achieve more than 28%, 24% area reduction respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.65-71
• /
• 1996

In the design of wood structures, the consideration of the dynamic load effect has been increased. Generally, damping ratio is presented as the method of considering dynamic load effect. So, the relationship between joint type and damping ratio was investigated. It has been known that the joint extremely damp the dynamic load in wood structures. Static test was performed to determine the effects of nail size and friction area on joint strength and stiffness. Joint strength and stiffness were increased with nail size. However, the static properties of joint was not affected by friction area. Cyclic test was performed to determine the effects of nail size, friction area and load magnitude on damping ratio, Damping ratio was affected by all factors. Increasing the width of the bottom plate was suggested as the most adequate method to increase the damping ratio without the reduction of the static properties of the structures.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.17-30
• /
• 2011

The polarizer is an important optical element used in a variety of applications. Nano-wire grid polarizers in the form of sub-wavelength metallic gratings are an attractive alternative to conventional polarizers, because they provide high extinction ratio. This study has been carried out to fabrication of the 17inch area size nano-wire grid polarizer(NWGP) The master for NWGPs with a pitch of 200nm and the area size $730mm{\times}450mm$ were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the Roll to-Roll UV imprinting and was applied to flexible PET film. The results were a transmission of light (Tp) 46.7%, reflectance (Rs) 40.1% and Extinction ratio of above 16 for the visible light range.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.53-57
• /
• 2002

The purpose of this study was to investigate the remodeling of apartments according to the area type and size in order to provide some information for the future plans for more consumer-friendly dwelling units. To achieve this goal, quantitative data analyses was employed. The sample was a total of 100 apartments analysed on apartments remodeling. The data were analyzed by SPSS WIN program package in terms of frequency, percentage, and x 2-test on the actual remodeling behaviors according to the area type and size of apartments. For the future research case studies recommended small, medium, and large sizes of apartments respectively through interviews, actual surveys, and questionnaires on remodeling behavior, interior design, and interior atmosphere according to the area type and size of apartments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.985-988
• /
• 1997

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study ,a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented in up end milling process using measured cutting forces. Size effect was identified from the analysis of specific cutting resistance obtained by using the modified undeformed chip section area.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.7 no.1
• /
• pp.33-44
• /
• 2001

This study is about the Spatial Composition and Area Calculation in Plastic Surgical Clinics. 1. The space of the plastic surgical clinics are divided into 4 sections; exam, exam support, the staffs, and waiting and reception area. 2. The average G/N ratio of width was 1.46. The Plastic surgical clinics which had great deviation in the ratio showed these characteristics; first, when they were planned at first, the operation rooms were not assigned enough space; second. space for supporting exam and the activities of staffs was given too little consideration in their first drafts. 3. The average size of operation rooms was $21.76m^2$. The most desirable size was found to be $26.4m^2$ when we put the number of staffs, the movement area of stretcher, and the movement lines of operation room into consideration.

• Korean Journal of Materials Research
• /
• v.23 no.2
• /
• pp.81-88
• /
• 2013

In this study, using a tin chloride solution as the raw material, a nano-sized tin oxide powder with an average particle size below 50 nm is generated by a spray pyrolysis process. The properties of the tin oxide powder according to the nozzle tip size are examined. Along with an increase in the nozzle tip size from 1 mm to 5 mm, the generated particles that appear in the shape of droplets maintain an average particle size of 30 nm. When the nozzle tip size increases from 1 mm to 2 mm, the average size of the generated particles is around 80-100 nm, and the ratio of the independent particles with a compact surface structure increases significantly. When the nozzle tip size is at 3 mm, the majority of the generated particles maintain the droplet shape, the average size of the droplet-shaped particles increases remarkably compared to the cases of other nozzle tip sizes, and the particle size distribution also becomes extremely irregular. When the nozzle tip size is at 5 mm, the ratio of droplet-shaped particles decreases significantly and most of the generated particles are independent ones with incompact surface structures. Along with an increase in the nozzle tip size from 1 mm to 3 mm, the XRD peak intensity increases, whereas the specific surface area decreases greatly. When the nozzle tip size increases up to 5 mm, the XRD peak intensity decreases significantly, while the specific surface area increases remarkably.

• Fashion & Textile Research Journal
• /
• v.25 no.5
• /
• pp.615-625
• /
• 2023

This study aimed to analyze the characteristics of the lower-body shape of middle-aged males with abdominal obesity by type and consider dimensional distribution to present a suit-pants size. The criteria were having a waist circumference greater than 90 cm and a waist-to-hip ratio(WHR) greater than 0.90; a total of 566 middle-aged males were surveyed. The findings revealed that, first, compared to standard lower-body types, the average body size of abdomenobese middle-aged males was significantly larger, especially in the horizontal area than in the vertical ares. Second, through a cluster analysis, a total of three categories of abdominal obesity were defined: small oval, large cylinder, and trapezoid type. The coverage rates of each type were 93.8%, 75.9%, and 93.0%, respectively. Finally, the suit-pants size system established according to lower-body types indicated the basic body size and reference body size were different for each type and also for the KS K 0050 male adult's garments size system. According to the definition of abdominal obesity, the types of abdominal obesity and the dimensions of each area are different, even if they belong to the same obesity group, suggesting that it is necessary to develop a pattern based on the analysis of obesity types.