• ETRI Journal
• /
• v.29 no.1
• /
• pp.27-35
• /
• 2007

Energy savings in orthogonal frequency division multiplexing (OFDM) systems is an active research area. In order to achieve a solution, we propose a new cooperative relaying scheme operated on a per subcarrier basis. This scheme improves the bit error rate (BER) performance of the conventional signal-to-noise ratio (SNR)-based selection relaying scheme by substituting SNR with symbol error probability (SEP) to evaluate the received signal quality at the relay more reliably. Since the cooperative relaying provides spatial diversity gain for each subcarrier, thus statistically enhancing the reliability of subcarriers at the destination, the total number of lost subcarriers due to deep fading is reduced. In other words, cooperative relaying can alleviate error symbols in a codeword so that the error correction capability of forward error correction codes can be fully exploited to improve the BER performance (or save transmission energy at a target BER). Monte-Carlo simulations validate the proposed approach.

• The Journal of Health Technology Assessment
• /
• v.5 no.1
• /
• pp.31-41
• /
• 2017

Objectives: To explore prevalently used types of medication error and the types of medication error which would be appropriate to be used in Korea. Methods: In depth literature review was performed to explore the mostly used types of medication error in the United States, Canada, Europe, Australia, and Japan. We intended to examine experts' view on the suitability of the types of medication error to be used in Korea. The types of medicati0on error were classified by activity criteria, severity criteria, process criteria, and responsible person criteria based on literature reviews. Results: According to the result of literature review, activity criteria was the most commonly used type of medication error. Ten experts in the area of patient-safety and medication error responded and the top two types of medication error which were appropriate and suitable to be used in Korea were severity criteria and activity criteria. Conclusion: Severity criteria and activity criteria could be recommended to be used as the standard types of medication error in Korea although there are other types of criteria such as process criteria and responsible person criteria.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.736-745
• /
• 2002

In network delivery of compressed video, packets may be lost if the channel is unreliable like Internet. Such losses tend to of cur in burst like continuous bit-stream error. In this paper, we propose an effective error-concealment approach to which an error resilient video encoding approach is applied against burst errors and which reduces a complexity of error concealment at the decoder using data hiding. To improve the performance of error concealment, a temporal and spatial error resilient video encoding approach at encoder is developed to be robust against burst errors. For spatial area of error concealment, block shuffling scheme is introduced to isolate erroneous blocks caused by packet losses. For temporal area of error concealment, we embed parity bits in content data for motion vectors between intra frames or continuous inter frames and recovery loss packet with it at decoder after transmission While error concealment is performed on error blocks of video data at decoder, it is computationally costly to interpolate error video block using neighboring information. So, in this paper, a set of feature are extracted at the encoder and embedded imperceptibly into the original media. If some part of the media data is damaged during transmission, the embedded features can be extracted and used for recovery of lost data with bi-direction interpolation. The use of data hiding leads to reduced complexity at the decoder. Experimental results suggest that our approach can achieve a reasonable quality for packet loss up to 30% over a wide range of video materials.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.109-112
• /
• 2000

Bitstrems corrupted by channel errors are not only difficult to be decoded but also propagate error to other part of the bitstreams when highly compressed video is transmitted over channels with noise such as mobile communication channels. In this paper, error concealment algorithm performed in decoder is proposed when errors occur for transmission. Proposed algorithm searches moving area with homogeneous movement in neighbored blocks when motion vectors are damaged, then recovers motion vectors of missing blocks considering where missing blocks are belong to. Experiment result shows that proposed algorithm exhibits better performance in PSNR than existing error concealment method.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1190-1199
• /
• 2016

This study proposes a classification and compensation algorithm of two non-ideal output signals of a resolver to reduce position errors. Practically, a resolver generates position errors because of amplitude imbalance and quadrature imperfection between the two output signals of the resolver. In this study, a digital signal processor system based on a resolver-to-digital converter is used to reconstruct the two output signals of the resolver. The two output signals, "sin" and "cos," can be represented by a unit circle on the xy-plot. The classification and compensation of the errors can be obtained by using the radius and area of the circle made by the resolver signals. The method computes the integration of the areas made by the two resolver output signals to classify and compensate the error. This system cannot be applied during transient response given that the area integration during the transient state causes an error in the proposed method. The proposed method does not need any additional hardware. The experimental results verify the effectiveness of the proposed algorithm.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.637-645
• /
• 2003

Small area estimation had been studied using data-based methods such as Direct, Indirect, Synthetic methods. However recently, model-based such as based on regression or time series estimation methods are applied to the study. In this paper we investigate a model-data based small area estimation which takes into account the spatial relation among the areas. The Economic Active Population Survey in 2001 are used for analysis and the results from the model based and model-data based estimation are compared with using MSE(Mean squared error), MAE(Mean absolute error) and MB(Mean bias).

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.264-269
• /
• 2014

We consider transmission over body area networks. Due to the difficulty in assessing an accurate statistical model valid for multiple scenarios, we advocate a system design technique favoring robustness. Our approach, which is based on results in [12] and generalizes them, examines the variation of a performance metric when the nominal statistical distribution of fading is replaced by the worst distribution within a given Kullback-Leibler divergence from it. The sensitivity of the performance metric to the divergence from the nominal distribution can be used as an indication of the design robustness. This concept is applied by evaluating the error probability of binary uncoded modulation and the outage probability-the first parameter is useful to assess system performance with no error-control coding, while the second reflects the performance when a near-optimal code is used. The usefulness of channel coding can be assessed by comparing its robustness with that of uncoded transmission.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1989

Nowadays Hyperbolic Navigation System-LORAN, DECCA, OMEGA, OMEGA-is available on the ocean, and Spherical Navigation System, GPS (Global Positioning System) is operated partially. Hyperbolic Navigation System has the blind area near the base line extention because divergence rate of hyperbola is infinite theoretically. The Position Accuracy is differ from the cross angle of LOP although each LOP has the same error of quantity. GDOP(Geometric Dilution of Precisoin) is used to estimate the position accuracy according to the cross angle of LOP and LOP error. Hyperbola and ellipse are crossed at right angle everywhere. Hyperbola and ellipse are used to LOP in Rectangular Navigation System. The equation calculating the GDOP of rectangular Navigation System is induced and GDOP diagram is completed in this paper. A scheme that can improve the position accuracy in the blind area of Hyperboic Navigation System using the Rectangular Navigation System is proposed through the computer simulation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.229-236
• /
• 2003

In this study, for efficient replacemen of sensor modelling of high-resolution satellite imagery, image segmentation method is applied to the test area of the SPOT-3 satellite imagery. After that, a third-order polynomial model in the sectioned area is compared with the RFM which is to the entire in the test area. As results, plane error of the third-order polynomial model is lower(approximately 0.8m) than that of RFM. On the other hand, height error of RFM is lower(approximately 1.0m).

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.4
• /
• pp.7-13
• /
• 2014

In this paper, an area-efficient degree-computationless modified Euclidean (DCME) algorithm is presented and implemented for high-speed Reed-Solomon (RS) decoder. The DCME algorithm can be used to solve the key equation in Reed-Solomon decoder to get the error location polynomial and the error value polynomial. A pipelined recursive structure is adopted for reducing the area of key equation solver (KES) block with sacrifice of an amount of decoding latency. For comparisons, KES block for RS(255,239,8) decoder with the proposed architecture is implemented using Verilog HDL and synthesized using Synopsys design tool and 65nm CMOS technology. The synthesis results show that the proposed architecture can be implemented with less gate counts than other existing DCME architectures.