• ETRI Journal
• /
• 제26권6호
• /
• pp.535-544
• /
• 2004

With video compression standards such as MPEG-4, a transmission error happens in a video-packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re-used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.

• 응용통계연구
• /
• 제21권1호
• /
• pp.109-123
• /
• 2008

많은 소지역 추정량이 제안되었으며, 국내외에서 소지역 추정에 관한 많은 연구가 진행되고 있다. 또한 소지역 추정량의 특성과 우수성을 비교하기위한 비교통계량도 연구되고 있다. 기존의 소지역 추정량은 MSE(Mean square error)를 최소화하여 얻어지며, 이에 따라 추정량의 우수성도 MSE를 기준으로 판단하고 있다. 본 논문에서는 최근 새롭게 재조명 되고 있는 MSPE(Mean square percentage error)를 최소화하는 추정량을 제안하였다. 신기일 등 (2007)에서 사용된 비교통계량과 MSE 그리고 MSPB를 이용하여 제안된 추정량과 기존의 소지역 추정량을 비교하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.115-118
• /
• 2005

A workpiece with a large surface area is likely to be uneven due to form error and waviness. These geometric disturbances can cause inaccurate micro shapes to be formed when micro features are micro-grooved into the surface and cause the resulting workpiece to fail to function as desired. Thus, real-time measurement and compensation is required to guarantee the form accuracy of micro features while machining a workpiece with a large surface area. In this study, a method is suggested for real-time measurement of geometric error for the micro grooving of a large flat surface using a laser displacement sensor. The measurements are demonstrated for the workpieces with large surface areas and the experimental results show that the waviness and form error are well detected.

• Communications for Statistical Applications and Methods
• /
• 제22권4호
• /
• pp.349-359
• /
• 2015

We study a semiparametric Bayesian approach to small area estimation under a nested error linear regression model with area level covariate subject to measurement error. Consideration is given to radial basis functions for the regression spline and knots on a grid of equally spaced sample quantiles of covariate with measurement errors in the nested error linear regression model setup. We conduct a hierarchical Bayesian structural measurement error model for small areas and prove the propriety of the joint posterior based on a given hierarchical Bayesian framework since some priors are defined non-informative improper priors that uses Markov Chain Monte Carlo methods to fit it. Our methodology is illustrated using numerical examples to compare possible models based on model adequacy criteria; in addition, analysis is conducted based on real data.

• 로봇학회논문지
• /
• 제5권1호
• /
• pp.55-63
• /
• 2010

This paper describes performance improvement of GPS/DR Integration system using area decision algorithm and vehicle movement information. In GPS signal blockage area, i.e., tunnel and underground parking area, DR sensor errors are accumulated and navigation solution is gradually diverged. We use the car movement information according to moving area to correct the DR sensor error. Also, vehicle movement is decided as stop, straight line, turn and movement changing region through DR sensor data analysis. The car experiment is performed to verify the supposed method. The results show that supposed method provides small position and heading error than previous method.

• 복식문화연구
• /
• 제7권2호
• /
• pp.275-288
• /
• 1999

The purpose of this is providing a simple, relatively errorless body surface area calculation. Subjects were 10 married women and 10 singles women whose age was 20 to 29 years old. The Gypsum method has applied for the sampling of body surface. The Weight method has been used to measure body surface by means of transferring gypsum shape on uniform plane polypropylene films. In this study, compare analyzed errors between the traditional formulas for measuring body surface area and measuring data in this experiment. More than all, it has been to induce a regression equation for measuring body surface area, which is so simple to calculate with less errors, with variable factors as weight and height. The results of this experiment as follows : 1. In the traditional formulas, weight formula was shown high average error : Niya\`s height formula. which was modified K value as 0.62 in the height formula (S = KH) is shown lower average error than Lassabliere\`s Height formula. 2. In the weight-height formula (S=K √WH), it was shown high average error according to the increasing of K value. Kawanami\`s formula, which 5.378 as K value, was shown low average error both the singles and the married women. 3. Dubois weight-heingt formula (S=W/sup a/·H/sub b/·K) was shown low average error than the weight, height, weight-height (S=K√WH) formula. 4. The regression equations with variable factors as weight and height are 156.74W + 86.05H - 660.25 (Single women) and 136.02W + 90.57H - 6241.32 (Married women) the average error and absolute average error to the singles are 0.09%, 0.94% and resoectively -0.13%, 1.16% for the married women.

• 한국지능시스템학회논문지
• /
• 제18권5호
• /
• pp.611-616
• /
• 2008

Error correcting codes는 일반적으로 soft error를 막기 위해서 사용된다. single error의 수정과 double error의 검출(SEC-DED) 코드들은 이런 목적으로 사용된다. 본 논문에서는 이러한 회로의 크기, 지연시간, 전력 소비를 선택적으로 최소로 하는 SEC-DED의 설계방법을 제안한다. 이러한 SEC-DED의 설계는 비선형 최적화 문제로 포함되는데 우리는 다목적 유전자 알고리즘을 이용하여 이 문제를 해결한다. 제안하는 방법은 여러 가지 SEC-DED code들을 제공하여 사용자의 환경에 따라 알맞은 회로를 선택할 수 있도록 한다. 제안하는 방법을 효율적인 ECC코드로 알려져 있는 odd-column weight Hsiao code에 적용하여 그 효율성을 입증하였다.

• 한국항공운항학회지
• /
• 제22권3호
• /
• pp.74-81
• /
• 2014

The coverage area of GNSS regional ionospheric correction model is mainly determined by the disribution of GNSS ground monitoring stations. Outside the coverage area, GNSS users may receive ionospheric correction signals but the correction does not contain valid correction information. Extrapolation of the correction information can extend the coverage area to some extent. Three interpolation methods, Kriging, biharmonic spline and cubic spline, are tested to evaluate the extrapolation accuracy of the ionospheric delay corrections outside the correction coverage area. IGS (International GNSS Service) ionosphere map data is used to simulate the corrections and to compute the extrapolation error statistics. Among the three methods, biharmonic method yields the best accuracy. The estimation error has a high value during Spring and Fall. The error has a high value in South and East sides and has a low value in North side.

• Spatial Information Research
• /
• 제18권4호
• /
• pp.43-53
• /
• 2010

댐은 생활에 필요한 물을 안정적으로 공급하고 여름철 집중강우에 의한 홍수피해를 저감하는 효과가 있으나, 댐 건설로 많은 토지나 가옥 등이 수몰되고 댐 주변지역의 환경에도 큰 영향을 주고 있다. 이러한 댐 주변지역의 생활환경을 개선하고 지원하기 위한 사업들이 시행되고 있으며, 본 연구에서는 GIS 공간중첩 기능을 이용하여 공간정보 축척에 따른 용담댐 수몰지역과 댐주변지역 면적오차 특성을 분석한 결과 다음의 결론을 얻었다. 첫째, 1/3,000 수치지형도를 기준으로 각 축척별 수몰지역 면적오차를 분석한 결과, l/5,000 수치지형도가 1/25,000 수치지형도에 비해 면적오차의 합과 표준오차 그리고 수몰지역 전체면적에 대한 면적오차의 합의 비율에서 각각 9.5배, 9.0배, 10.5배로 정확도 측면에서 매우 효과적임을 알 수 있었다. 둘째, 댐주변지역 면적오차를 분석한 결과, l/5,000 수치지형도가 l/25,000 수치 지형도에 비해 진안군 진안읍이 2km 이내 및 2~5km의 집수구역내 지역에서 각각 13.8배와 20.6배로 가장 큰 차이를 보였다. 또한 2km 이내의 집수구역외 지역에서는 점유면적 자체가 매우 작아 오차특성에 큰 차이를 보이지 않았으며, 2~5km 구간의 집수구역외 지역에서는 금산군 남이면이 31.8배로 가장 큰 오차특성을 나타냄을 알 수 있었다. 마지막으로 댐주변지역 면적오차의 합과 표준오차 그리고 주변지역 전체면적에 대한 면적오차의 합의 비율에서도 1/5,000 수치지형도는 1/25,000에 비해 각각 7.4배, 11.8배, 7.4배로 정확도 측면에서 매우 효과적임을 알 수 있었다.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.721-728
• /
• 2014

In this paper, it is proposed a method of optimizing path parameters for large-area laser processing. On-the-fly system is necessary for large-area laser processing of uniform quality. It is developed a MOTF(Marking On-The-Fly) board for synchronizing the stage and scanner. And it is introduced the change of the error due to the change of parameters and algorithm for large-area laser processing. This algorithm automatically generates stage path and a velocity profile using acceleration and deceleration parameters. Since this method doesn't use a G-code, even if without expert knowledge, it has an advantage that can be accessed easily. Angle of one of the square of $350{\times}350mm$ was changed from $50^{\circ}$ to $80^{\circ}$ and analyzed the error corresponding to the value of Ta. It is calculated the value of Ta of the best with a precision of 20um through measurement of accuracy according to the Ta of each angle near the edge.