• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.31-38
• /
• 2010

It is difficult to design accurately the bandgap of metamaterial depending on metamaterial pattern and array configuration. In this paper, we propose a design method for the wanted bandgap frequency using any metamaterial pattern in 2 dimensional array. Metamaterial structure is consisted of periodic array. Therefore the calculation area in FDTD(finite difference time domain) method can be reduced by applying the periodic boundary condition to 2-D metamaterial array. The method for design and calculation the L and C values by using 2-D is also considered. So it can be designed more accurately and rapidly. For example, we designed metamaterial square pattern array in 5 GHz, and compared with the 1-D metamaterial pattern using analysis method in microstrip line. As a result, we found that the accuracy of this proposed method can be incresed to 14.7%.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.2
• /
• pp.84-92
• /
• 2007

This paper proposes an interconnect delay fault test (IDFT) solution on boards and SoCs based on IEEE 1149.1 and IEEE P1500. A new IDFT system clock rising edge generator which forces output boundary scan cells to update test data at the rising edge of system clock and input boundary scan cells to capture the test data at the next rising edge of the system clock is introduced. Using this proposed circuit, IDFT for interconnects synchronized to different system clocks in frequency can be achieved efficiently. Moreover, the proposed IDFT technique does not require any modification of the boundary scan cells or the standard TAP controller and simplifies the test procedure and reduces the area overhead.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.87-94
• /
• 2012

This study is to evaluate flood inundation and to recommend measures of damage reduction on sediment by concentrated torrential rainfall at Gonjiamcheon Watershed (183.4 $km^2$). Firstly, the SWAT (Soil and Water Assessment Tool) was simulated streamflow and sediment at upstream. Then, we produced a map of floodplain boundary by using HEC-RAS (Hydrologic Engineering Centers River Analysis System) at downstream. The SWAT model was calibrated with 2 years (2008~2009) daily streamflow and validated for another years (2010~2011. 7. 31). The SWAT model was simulated with 3 years (2008~2010) by monthly water quality (Sediment) at Gonjiamcheon water quality station. The streamflow and sediment from SWAT model were input as boundary conditions to HEC-RAS. The results of HEC-RAS indicated that mapping of floodplain boundary was Jiwol and Jiwol 2 district. Additionally, inundation area and depth were assessed and applied BMPs scenario for managing the sediment yield.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.1 s.30
• /
• pp.37-49
• /
• 1997

The buckling behavior of the web of steel girders are largely dependent on the size and the location of stiffeners and the restraining effect of top and bottom flanges. Elastic and inelastic buckling analyses based or the Spline Finite Strip Method were executed to study the stiffening effect of the longitudinal stiffener on the web of box girders and to find how the top and bottom flanges had effects on the web, where geometric boundary conditions were limited by both hinged, both fixed and the flange sections. The basic assumption for the longitudinal end boundary conditions was that the vertical stiffeners had the rigidity enough to force nil deflection line on the web panel so that the junction line between web and vertical stiffener was assumed to be hinged boundary conditions. The provisions on the longitudinal stiffener of the plate and box girders of the Korean Standard Highway Bridge Specifications(1995) and AASHTO Specifications(1994 LRFD) were compared with the results obtained numerically for the various longitudinal stiffener size of box girders. Simple equations and design curves for the longitudinal stiffener of the web were proposed for the practical use.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.577-584
• /
• 2000

Seismic refraction survey was peformed for 10 lines along NE-SW and NW-SE directions above Nampoong gallery at Makyo-ri, Dogye, Samcheok, Kangwon-do. 48 geophones were laid in line with the interval of 1m, and a 5Kg hammer was used as a source at 5 points for each line. Data processing was done using reciprocal time method, GRM, and traveltime tomography which utilizes wavefront expansion method for forward process and SIRT for inversion. The result shows that the first layer has its lower boundary between 3.49m and 8.88m. The P-wave velocity of the first and the second layer were estimated as 270 360m/s and 1550 1940m/s respectively. When the boundary of the first and second layer is smooth enough and the velocity difference is large enough, GRM has little advantage over reciprocal time method. The result of reciprocal method and traveltime tomography shows consistency. The northeast part of the boundary has syncline structure, which is similar to the topography above. This implies that the collapse of the cavities of Nampoong gallery result in the subsidence of the ground surface. The subsidence is in progress across the Youngdong railroad, therefore a proper reinforcement work is required.

• The Journal of Fisheries Business Administration
• /
• v.28 no.1
• /
• pp.1-26
• /
• 1997

The Proposal of this paper is to draw up solution about fishing disputes in Korea coastal waters. Small fishing vessels under 8 metric tons which is regulated by the provincial governors, must operate within provincial boundary on the sea as in fishery policy of Korea. on this, I think that the present situations of fishing disputes have related to the fishing license system. Problem of this kind, Before 1970's, fishing disputes rarely took place, and it, if any, did not bring any social conflicts or disputes. Since 1980's, some of fishing disputes have been reported within fisheries society Recently, The disputes have been increasing to become social conflicts between local people concerned and have evoked an argument on whether the provincial boundary on the sea exists. If such disputes continues to increases or remains unsolved, they will bring a tremendous social cost such as an accelerated decrease in fish resources, degradation of fishing grounds, disorder in fishing, destruction of fisheries culture and so on. The reasons for the growing disputes can be specified as fellows : the degradation of fish resources, the present fishing license system which inherently causes competitions in fish catching, irrational ceiling system of fishing vessels, legal problem on existing boundary between neighbouring two provinces, the functional problem of national or regional fishery coordination committee which has been established to coordinate general fishing disputes. This study has also dealt with Japan's experiences in fishing disputes which has the history of more than a hundred years and its coordinating mechanism. In the discussion section, some possible solutions have been briefly touched fer further study.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.375-388
• /
• 2009

Numerical simulation is essential to indicate the flow of the atmosphere in the region with a complicated topography which consists of many mountains in the inland while it is neighboring the seashore. Such complicated topography produces land and sea breeze as the mesoscale phenomenon of meteorology which results from the effect of the sea and inland. In the mesoscale simulation examines, the change of the temperature in relation to the one of the sea surface for the boundary condition and, in the inland, the interaction between the atmosphere and land surface reflecting the characteristic of the land surface. This research developed and simulated PNULSM to reflect both the SST and vegetation effect as a bottom boundary for detailed meteorological numerical simulation in coastal urban area. The result from four experiments performed according to this protocol revealed the change of temperature field and wind field depending on each effect. Therefore, the lower level of establishment of bottom boundary suitable for the characteristic of the region is necessary to figure out the atmospheric flow more precisely, and if the characteristic of the surface is improved to more realistic conditions, it will facilitate the simulation of regional environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.754-757
• /
• 2003

In Oriental medicine, the shape of collarette that formed with position in iris of patients often used by health diagnotcian to grasp health condition. In this paper, we present method that effectively extract collarette that exist in Iris image. After proposed method detert iris area using circular edge detector, derides boundary candidate point through radial line search and threshold value establishment. And boundary candidate line is treated to use nearest neighbor calculation at each boundary candidate point, finally extracts collarette through linear interpolation. As a result of experimenting about iris images, We Confirmed that can be used as assistant tool of diagnostic system that can presume state of ventriculus of human body.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.395-400
• /
• 2005

The ship hull part is always exposed to severe corrosive environments. Therefore, it should be protected in appropriate ways to reduce corrosion problems. So there are two effective methods in order to protect the corrosion of ship hull. One is the paint coating as a barrier between steel and electrolyte (seawater) and the other is the cathodic protection(CP) supplying protection current. In the conventional design process of the cathodic protection system the required current densities of protected materials have been used. However, the anode position of field or laboratory experiment for obtaining the required current density for CP is significantly different from anode position for real structures. Therefore, the recent CP design must consider the optimum anode position for potential distribution equally over the ship hull. The CP design companies in the advanced countries can obtain the potential distribution results on the cathodic materials by using the computer analysis module. This study would show how to approach the potential analysis in the field of corrosion engineering. The computer program can predict the under protection area on the structure when the boundary condition and analysis procedure are reasonable. In this analysis the polarization curve is converted to the boundary condition in material data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.517-528
• /
• 2007

Extraction of the coastal boundary is important because the boundary serves as a reference in the demarcation of maritime zones such as territorial sea, contiguous zone, and exclusive economic zone. Accurate nautical charts also depend on well established, accurate, consistent, and current coastline delineation. However, to identify the precise location of the coastal boundary is a difficult task due to tidal and wave motions. This paper presents an efficient way to extract coastlines by applying digital image processing techniques to Synthetic Aperture Radar (SAR) imagery. Over the past few years, satellite-based SAR and high resolution airborne SAR images have become available, and SAR has been evaluated as a new mapping technology. Using remotely sensed data gives benefits in several aspects, especially SAR is largely unaffected by weather constraints, is operational at night time over a large area, and provides high contrast between water and land areas. Various image processing techniques including region growing, texture-based image segmentation, local entropy method, and refinement with image pyramid were implemented to extract the coastline in this study. Finally, the results were compared with existing coastline data derived from aerial photographs.