• Korean Journal of Environment and Ecology
• /
• v.25 no.5
• /
• pp.649-657
• /
• 2011

This study had targeted the Manjong Junction~Hongchun interchange section of Jungang highway in order to analyze the efficiency and improvement of the highway wild-life fences. Being analyzed wild-life fence as an effective facility for the prevention of road-kill, it had founded that the wild animals did not jump over even the two layer guardrail, concrete barrier and noise barrier, fence for rock fall. For the section with high road-kill decrease effect after installing the wild-life fence, the effect was higher at wild-life fence with the height of 1.0m where the door had not been installed and the well connected points of road facility than the area with fence height of 1.5m. The road-kill decrease effect was also high at the well managed areas even if the door has not been installed. Also, road-kill had occurred by concentrating around the end of wild-life fence after installing the fence, Moreover road-kill had also occurred around the cutting section. The door of wild-life fence had higher amount of road-kill occurrence as the installation interval was closer. it was analyzed that the door management has a lot of effect on road-kill decrease. The fence for rock fall, two layer guardrail and concrete barrier having the effect of wild-life fence installed on the road would have to be installed by connecting with wild-life fences through proper facility improvement. Although the door should not be installed if possible, it should be installed as automatic door or gravity door to prevent the door from leaving the door open. An escape route has to be formed for the prompt escape away from the road for the animals entered through the ending section of the fence. The eco-corridor has to be made by restoring the soil layer of dual purpose eco-corridor forming a planting area. Also, the dead body after the accident has to be disposed to the outer section of the road immediately in order to prevent the secondary road-kill by the predator from the road-kill. The fence has to be installed as 500m or longer in both ways, in other words 1,000m or longer, from the targeted spot of minimum accident prevention while connecting up to the bridge or box culvert, etc that are next road facilities if possible to guide wild animals safely to the eco-corridor.

• Korean Journal of Environment and Ecology
• /
• v.25 no.5
• /
• pp.767-786
• /
• 2011

This study analyzed and compared characteristic of vegetation structure in Bonghwa mountain, the base Mt. outside urban area, and Hakseoung neighborhood park, Ilsan neighborhood park and Musil neighborhood park, disconnected residual Mt. inside urban area of Wonju. Regarding vegetation of urban forest in Wonju, Quercus mongolica forest and Robinia pseudo-acacia forest were widely distributed in the base Mt. outside urban area. Quercus acutissima forest and Robinia pseudo-acacia forest were widely distributed in the disconnected residual Mt. inside urban area. Forests in both areas were managed as part of forest management campaign. Analysis on importance value of a community classified by DCA and DBH class categorized communities into three groups according to the expected ecological succession. Community B was the one to be maintained as Pinus densiflora community. Community A, D and d were expected to be maintained as Quercus spp. Community. Community C, E, F, e, f and g were classified as exotic plant community. Ecological succession was suspended in both base Mt. outside urban area and disconnected residual Mt. inside urban area. However, importance value of Quercus spp. which appeared in the understory layer and shrub layer and their DBH class showed that the potential for ecological succession of exotic plant community was higher in base Mt. outside urban area than disconnected residual Mt. inside urban area. According to the analysis on number of species and individuals and species diversity, understory and shrub layer were reduced due to Forest Management campaign and plant species which appear at an earlier stage of succession varied as time went by since the campaign began. Species diversity comparison between natural and artificial forest showed no clear difference in both base Mt. outside urban area and disconnected residual Mt. inside urban area due to man-made disruption such as thinning and brush cutting. Six communities in base Mt. outside urban area had 17.76~52.22% of similarity index. Four communities in disconnected residual Mt. inside urban area showed 13.34~37.01% of similarity index, which was lower than base Mt. outside urban area. Among naturalized plants, Tupatorium rugosum and Phytolacca americana appeared more in disconnected residual Mt. inside urban area.

• Korean Journal of Environment and Ecology
• /
• v.24 no.6
• /
• pp.751-762
• /
• 2010

In order to understand the influence that the plant cover condition of the high-rise building outer space causes to the temperature change, we selected 12 high-rise building constructed in Seoul City. The land cover type of the outside was classified into six type(outer road, paved surface, shrub/grassland, single-layer tree planting-site, multi-layer planting-site, and waterscape facilities) and the temperature was measured at the representative point for each type in order to analyze the land cover temperature differential for each type of the high-rise building outer space. The study area showing the temperature tendency to be similar based upon one way analysis of variance after selecting the central part of the outer road for a control and measuring a temperature in order to consider the neighboring environmental difference of the dozen building was classified into 4 groups. As to the one-way layout result of variance analysis with the land cover type of the classified group and outer space temperature, the single-layer tree planting-site, waterscape facilities, and multi-layer planting-site belonged mainly to the low temperature section. The shrub/grassland, paved surface, and outer road belonged to the high temperature region. The temperature difference between low temperature region and high temperature region is about $1.06{\sim}6.17^{\circ}C$. However, the temperature in the Outer Space of the Super-High-Rise Building was variously appeared by the influence such as the cramped of the created planting-site and waterscape facilities area, the increase of amount of solar radiation and the reduction of reflection amount of light due to building etc.. Thus, the composition all produced the area of the green quantity required for each space and water space in advance. It was determined that there were the minimum area displaying an effect and the necessity to it secures the green quantity.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.342-350
• /
• 2018

The purpose of this study was to identify the environmental factors that affect the beginning and end of calling by Hyalessa fuscata and Cryptotympana atrata, which are dominant cicada species in the central urban areas of Korea. The study area was Banpo Apartments in Seoul. The research period included two months, being from the end of July to the end of August 2015. We analyzed the start and end time of cicada calling, and on average H. fuscata started calling at 5:21 am and C. atrata started at 7:40 am. The average end time of calling was 6:31 pm for H. fuscata and 7:51 pm for C. atrata. From the scatter plot and box plot results, H. fuscata started calling at 05:00 am, whereas C. atrata consistently stopped calling at 20:00 pm compared to H. fuscata. Multiple regression analysis of the start and end time of cicada calling showed that sunrise time was a factor affecting the start of H. fuscata calling. The end time of H. fuscata calling was affected by sunset time and total cloud cover. The starting time of C. atrata calling was mostly affected by temperature and sunrise time. The effect of temperature was greater than that of sunrise time. The end time of C. atrata calling was strongly affected by sunset time, whereas peak temperature was also shown to affect the end time. From the above results, sunrise and sunset are thought to be the critical factor affecting the start and end time of H. fuscata calling. Therefore, H. fuscata started calling with sunrise, and the end time was also affected by sunset. Temperature was the factor most affecting the start of C. atrata calling and sunset was identified as the factor affecting the end time. Therefore, the start time of C. atrata calling shows variation with daily temperature changes, and C. atrata stop calling simultaneously with sunset.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1366-1381
• /
• 1997

Background : Uvulopalatopharyngoplasty(UPPP) has become the most common surgical treatment for obstructive sleep apnea syndrome(OSAS). However, the results of this therapeutic modality have been quite variable with successful results by several authors and poor results by others. Until recently, in Korea, there is only a few reports about the clinical efficacy of UPPP. A prospective study was undertaken to evaluate the effectiveness and complications of UPPP. Method : Twenty-six OSAS patients who had undergone UPPP with preoperative and postoperative polysomnographic studies were included in this study. Two definitions of surgical success were used. The responder was defined, using a conventional criteria, as a 50% or more reduction in apnea index(AI) or apneahypopnea index(AHI) after UPPP, or a postoperative AI of <10 or AHI of <20. The initial cure was defined, using our own criteria, as a postoperative AI of <5 or AHI of <10. Complications were categorized in two groups : early(disorders during the first 10 postoperative days) and late. Results : Eighteen patients(69.2%) were responders, and ten patients(38.5%) were considered as initial cure. On the other hand, in five patients (19.2%), postoperative polysomnographic data demonstrated deterioration compared with preoperative data. Reduction rate of AI or AHI following UPPP was not significantly related to the preoperative body mass index, AI or AHI. There was no significant change of sleep architecture before and after UPPP in responder and initial cure groups. Early complications such as pain, dyspnea, bleeding, nasal reflux, dysphagia or wound disruption were observed in all patients. Late complications such as nasal reflux, voice change, dysphagia, loss of taste, pharyngeal dryness or foreign body sensation were discovered in 22 patients (84.6%). However, all early and late complications were of minor importance. Conclusion : The response to UPPP was favorable in approximately 70% of OSAS patient. However, the initial Cure rate of UPPP was relatively low. We suggest that selection of more appropriate surgical candidates and adequate surgical protocol is necessary to obtain a more successful result with UPPP.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• Journal of Intelligence and Information Systems
• /
• v.16 no.2
• /
• pp.73-94
• /
• 2010

The attending system is a medical system that allows doctors in clinics to use the extra equipment in hospitals-beds, laboratory, operating room, etc-for their patient's care under a contract between the doctors and hospitals. Therefore, the system is very beneficial in terms of the efficiency of the usage of medical resources. However, it is necessary to develop a strong support system to strengthen its weaknesses and supplement its merits. If doctors use hospital beds under the attending system of hospitals, they would be able to check a patient's condition often and provide them with nursing care services. However, the current attending system lacks delivery and assistance support. Thus, for the successful performance of the attending system, a networking system should be developed to facilitate communication between the doctors and nurses. In particular, the nursing records in the attending system could help doctors monitor the patient's condition and provision of nursing care services. A nursing record is the formal documentation associated with nursing care. It is merely a data repository that helps nurses to track their activities; nursing records thus represent a resource of primary information that can be reused. In order to maximize their usefulness, nursing records have been introduced as part of computerized patient records. However, nursing records are internal data that are not disclosed by hospitals. Moreover, the lack of standardization of the record list makes it difficult to share nursing records. Under the attending system, nurses would want to minimize the amount of effort they have to put in for the maintenance of additional records. Hence, they would try to maintain the current level of nursing records in the form of record lists and record attributes, while doctors would require more detailed and real-time information about their patients in order to monitor their condition. Therefore, this study developed a system for assisting in the maintenance and sharing of the nursing records under the attending system. In contrast to previous research on the functionality of computer-based nursing records, we have emphasized the practical usefulness of nursing records from the viewpoint of the actual implementation of the attending system. We suggested that nurses could design a nursing record dictionary for their convenience, and that doctors and nurses could confirm the definitions that they looked up in the dictionary through negotiations with intelligent agents. Such an agent-based system could facilitate networking among medical institutes. Multi-agent systems are a widely accepted paradigm for the distribution and sharing of computation workloads in the scientific community. Agent-based systems have been developed with differences in functional cooperation, coordination, and negotiation. To increase such communication, a framework for a multi-agent based system is proposed in this study. The agent-based approach is useful for developing a system that promotes trade-offs between transactions involving multiple attributes. A brief summary of our contributions follows. First, we propose an efficient and accurate utility representation and acquisition mechanism based on a preference scale while minimizing user interactions with the agent. Trade-offs between various transaction attributes can also be easily computed. Second, by providing a multi-attribute negotiation framework based on the attribute utility evaluation mechanism, we allow both the doctors in charge and nurses to negotiate over various transaction attributes in the nursing record lists that are defined by the latter. Third, we have designed the architecture of the nursing record management server and a system of agents that provides support to the doctors and nurses with regard to the framework and mechanisms proposed above. A formal protocol has also been developed to create and control the communication required for negotiations. We verified the realization of the system by developing a web-based prototype. The system was implemented using ASP and IIS5.1.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.133-149
• /
• 2014

One of the main purposes of universities is to create new intellectual resources that will increase social values. These intellectual resources include academic research papers, lecture notes, patents, and creative ideas produced by both professors and students. However, intellectual resources in universities are often not distributed to the actual users or companies; and moreover, they are not even systematically being managed inside of the universities. Therefore, it is almost impossible for companies to access the knowledge created by university students and professors to utilize them. Thus, the current level of knowledge sharing between universities and industries are very low. This causes a great extravagant with high-quality intellectual and human resources, and it leads to quite an amount of social loss in the modern society. In the 21st century, the creative ideas are the key growth powers for many industries. Many of the globally leading companies such as Fedex, Dell, and Facebook have established their business models based on the innovative ideas created by university students in undergraduate courses. This indicates that the unconventional ideas from young generations can create new growth power for companies and immensely increase social values. Therefore, this paper suggests of a new platform for intellectual properties distribution with university-industry cooperation. The suggested platform distributes intellectual resources of universities to industries. This platform has following characteristics. First, it distributes not only the intellectual resources, but also the human resources associated with the knowledge. Second, it diversifies the types of compensation for utilizing the intellectual properties, which are beneficial for both the university students and companies. For example, it extends the conventional monetary rewards to non-monetary rewards such as influencing on the participating internship programs or job interviews. Third, it suggests of a new knowledge map based on the relationships between key words, so that the various types of intellectual properties can be searched efficiently. In order to design the system platform, we surveyed 120 potential users to obtain the system requirements. First, 50 university students and 30 professors in humanities and social sciences departments were surveyed. We sent queries on what types of intellectual resources they produce per year, how many intellectual resources they produce, if they are willing to distribute their intellectual properties to the industries, and what types of compensations they expect in returns. Secondly, 40 entrepreneurs were surveyed, who are potential consumers of the intellectual properties of universities. We sent queries on what types of intellectual resources they want, what types of compensations they are willing to provide in returns, and what are the main factors they considered to be important when searching for the intellectual properties. The implications of this survey are as follows. First, entrepreneurs are willing to utilize intellectual properties created by both professors and students. They are more interested in creative ideas in universities rather than the academic papers or educational class materials. Second, non-monetary rewards, such as participating internship program or job interview, can be the appropriate types of compensations to replace monetary rewards. The results of the survey showed that majority of the university students were willing to provide their intellectual properties without any monetary rewards to earn the industrial networks with companies. Also, the entrepreneurs were willing to provide non-monetary compensation and hoped to have networks with university students for recruiting. Thus, the non-monetary rewards are mutually beneficial for both sides. Thirdly, classifying intellectual resources of universities based on the academic areas are inappropriate for efficient searching. Also, the various types of intellectual resources cannot be categorized into one standard. This paper suggests of a new platform for the distribution of intellectual materials and human resources, with university-industry cooperation based on these survey results. The suggested platform contains the four major components such as knowledge schema, knowledge map, system interface, and GUI (Graphic User Interface), and it presents the overall system architecture.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.123-134
• /
• 2014

Identification of methods to optimize the growth of a plant community, including the capacity of the soil to further sequester carbon, is important in urban design and planning. In this study, to construct and manage an urban park to mitigate carbon emissions, soil organic carbon of varying biomass, different park construction times, and a range of vegetation types were analyzed by measuring aboveground and belowground carbon in Seoseoul Lake Park and Yangjae Citizen's Forest. The urban parks were constructed during different periods; Seoseoul Lake Park was constructed in 2009, whereas Yangjae Citizen's Forest was constructed in 1986. To identify the differences in soil organic carbon in various plant communities and soil types, above and belowground carbon were measured based on biomass, as well as the physical and chemical features of the soil. Allometric equations were used to measure biomass. Soil total organic carbon (TOC) and chemical properties such as pH, cation exchange capacity (CEC), total nitrogen (TN), and soil microbes were analyzed. The analysis results show that the biomass of the Yangjae Citizen's Forest was higher than that of the Seoseoul Lake Park, indicating that older park has higher biomass. On the other hand, TOC was lower in the Yangjae Citizen's Forest than in the Seoseoul Lake Park; air pollution and acid rain probably changed the acidity of the soil in the Yangjae Citizen's Forest. Furthermore, TOC was higher in mono-layered plantation area compared to that in multi-layered plantation area. Improving the soil texture would, in the long term, result in better vegetation growth. To improve the soil texture of an urban park, park management, including pH control by using lime fertilization, soil compaction control, and leaving litter for soil nutrition is necessary.

• Science of Emotion and Sensibility
• /
• v.17 no.3
• /
• pp.129-142
• /
• 2014

Due to the increase of the aged population and population of the disabled today, there is a growing demand for rehabilitation medical instruments. Furthermore, there is a growing demand for evaluation indices for services that should be provided for uses of the rehabilitation medical instruments. In order to evaluate rehabilitation medical instrument designs in this study, the basic index for design evaluations shall be identified to search for assessment plans. Through this, new evaluation indices will be deduced through discussions and analysis of rehabilitation medical experts, biomedical engineers, and designers. The results of this study are summarized as follows. First, the existing design evaluation indices were collected and analyzed to construct 10 rehabilitation medical instrument design evaluation indices and 44 sub-evaluation items. These will be important evaluation standards for designing rehabilitation medical instruments in the future. Second, the design evaluation indices that must be taken into consideration when developing health care rehabilitation medical instruments are the 10 design evaluation indices of usability, cognition, safety, learning, motility, durability, economic feasibility, space, aesthetics and environmental aspects. Third, design evaluation indices of environment, space, cognition, usability, economic feasibility and aesthetics are indices that must be taken into consideration for product design, while learning, safety, motility and durability are factors that must be given special consideration for rehabilitation medical instrument design evaluation indices. Fourth, if existing product design evaluation indices placed importance on environment, space, cognition, usability, economic feasibility and aesthetics of products for design evaluation indices, rehabilitation medical instrument design evaluation indices placed importance on learning, safety, motility and durability on top of usability and economic feasibility, which are the differences between the design evaluation indices of rehabilitation medical instrument and other product designs. The 10 rehabilitation medical device design evaluation indices and 44 sub-evaluation items were carried out in this study. This research is only on the overall rehabilitation medical device design evaluation indices. In future research, the evaluation indices will be applied in the actual rehabilitation medical design device through production of prototypes, while making revisions and supplementations where necessary.