• 한국건축시공학회지
• /
• 제12권4호
• /
• pp.401-414
• /
• 2012

The adoption of Green Frame is expected to provide economic benefits, since construction costs are reduced by the in-situ production of precast concrete column and beam. The cost reduction can ultimately be realized by saving transportation costs and the overhead and profit of PC plants. The cost structure of Green Frame, which is built up using composite precast concrete members, is similar to that of a bearing-wall structure, but the difference in construction process has resulted in some cost differences for a few items. In particular, production and installation is the principal work involved in Green Frame made by precast concrete members, while form and concrete work is the principal work for a bearing-wall structure. As such, the rental time and fee for a tower crane should be compared through time analysis. To verify reliability, this study focused on developed residential projects to estimate the construction costs. Through this analysis, it was found that the costs of Green Frame were 1.57% lower than the costs of bearing-wall structure. The results of this study will help in the development of a management plan for the structural work of Green Frame.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.159-167
• /
• 2017

본 연구의 목적은 능동제어기의 최적 제어력을 산정하는 과정에서 추정된 응답을 사용하기 위하여 고층건물의 풍응답을 정확하게 추정하는 것이다. 응답 추정을 위하여 칼만필터를 사용하였으며, 진동대에 설치된 3층 축소모형 구조물을 사용하여 추정 정확도를 검증하였다. 사용된 모델의 시스템 행렬은 시스템 식별에 의해 얻어진 모드 정보를 바탕으로 구성되었다. 가속도 응답으로부터 추정된 변위는 변위계로 계측된 변위와 거의 일치하는 결과를 보였다. 마지막으로 태풍 무이파에 의해 가진된 실제 39층 건축물의 풍응답을 추정하였다.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.29-36
• /
• 2019

Modular construction has benefits such as short construction duration and high productivity owing to the production in factory and owing to simultaneous on-site work. However, rework occurs in modular construction and the rework affects the efficiency of modular construction. The almost of causes of rework are exist in design process. To reduce the cause of rework, the information flow of the design process should be managed and the plan to reduce rework should be included. However, the modular construction has complex process because of impeded unit production so it is hard to manage the information flow in design process. Moreover, when the plan to reduce rework is included, the design process will be more complicated. Therefore, the objective of this research is to suggest the design process including the rework reduction plan and to alleviate the complexity of design process by using Dependency Structure Matrix(DSM). By using DSM, the iteration and feedback in design process is reduced and it can be expected that rework in modular project can be reduced by using suggested design process.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.41-48
• /
• 2018

Carbonation is one of the major detrimental factors to the reinforced concrete structures owing to penetration of atmospheric CO2 through the micro pores, thereby it reduces the durability of the concrete. The maintenance periods and cost for concrete according to the coefficient variation of different finishing materials is documented in literature. However, it is required to carry out the systematic and well planned studies. Therefore, keeping them in mind, surface repair was carried out to the carbonated concrete and the maintenance cost was calculated to measure the durability life after repair with different variable. The deterministic and probabilistic methods were applied for durability and repair cost of the concrete. In the existing deterministic model, the cost of repair materials increases significantly when the concrete structure reaches its service life. In present study using a stochastic model, the maintenance period and cost was evaluated. According to obtained results, there was no significant difference in the number of maintenance of the coefficient variation. The initial durability has a great influence on the maintenance time and cost of the structure. Unlike the deterministic model, the probabilistic cost estimating model reduces the number of maintenance to the target service life expectancy.

• Architectural research
• /
• 제3권1호
• /
• pp.45-52
• /
• 2001

In this paper, a pressurized single vertical arch and a pressurized leaning arch composed of flexible fabric material are considered. These arches have also been considered as a possible support structure for the tent-like structures. Two different boundary conditions are considered in leaning arches with fixed bases and pinned bases. The behaviors of the leaning arches are investigated for two tilt angles as 15, 30. For each angle, two loading conditions are considered as uniformly distributed load and wind loads. The F.E.M. is used through the all analysis procedures. For the results, load-deflection relationships, buckling modes, differences between two boundary conditions and deformed configurations are discussed.

• 건축역사연구
• /
• 제22권6호
• /
• pp.7-22
• /
• 2013

The purpose of this paper is to study on the spatial characteristics from the "The Holy Trinity" fresco painted by Masaccio in the early Renaissance paintings. The results of this study are as follows. 1. The elevation composition of the "The Holy Trinity" fresco is divided into the upper and lower structure through horizontal axis on horizontal line around vanishing point. The upper structure is composed of vertical axis formed through the disposition of the "Trinity" elements and horizontal axis on horizontal line. The lower structure is composed of the sarcophagus and skeleton in such inside and the altar supported through circular columns of left and right. 2. The section composition of the "The Holy Trinity" fresco is composed of the ceiling structure of cylindrical-shaped vault on upper part around basic square floor plan that is interior space and upper structure. The exterior space and lower structure is placed with sarcophagus in inner part that altar and step is projected as same height and width in the outside direction. 3. The basic floor composition of the "The Holy Trinity" fresco is planned by square shape around structural columns that is placed at corners as symmetry through transverse, longitudinal and diagonal axis. The whole floor composition planned through the altar and step that is in exterior space at front, the apse of round form at rear part and the structure of the middle story concept at interior. 4. The visual aspect of the "The Holy Trinity" fresco is composed of the stable balance in relation with distance and height because the interior and exterior space as well as the upper structure and lower structure is formed by regular proportion system. The elevation angle of visual range was planned to view in detail generally or partially the architectural composition system and element, characters through proper visual distance, center and position.

• 한국가구학회지
• /
• 제20권1호
• /
• pp.15-20
• /
• 2009

Marvelous calligraphy-woodcarving artwork was made by using the mysterious beauty of anatomical structure of wood. The wooden artwork uses not only beautiful external appearance of wood, but it also uses the mysterious beauty of anatomical micro structure of wood which can only be observed through optical microscope or scanning electron microscope. The characteristics of anatomical structure of wood were presented through various carving techniques. The used wood species for the artwork include Quercus acutissima Carruth., Cinnamomum japonicum Sieb., Betula davurica PALL, Magnolia kobus A.P.DC, Populus maximowiczii HENRY, Betula schmidtii REGEL and Plerocaya stenoptera DC. These various types of woodcarving techniques are anticipated to be applied to the techart marketing for architecture as a field of environment art.

• Wind and Structures
• /
• 제6권4호
• /
• pp.249-262
• /
• 2003

The purpose of this study is to propose a procedure for evaluating quantitatively the increase of the equivalent damping ratio of a structure with passive/active vibration control systems subjected to a stationary wind load. A Lyapunov function governing the response of a structure and its differential equation are formulated first. Then the state-space equation of the structure coupled with the secondary damping system is solved. The results are substituted into the differential equation of the Lyapunov function and its derivative. The equivalent damping ratios are obtained from the Lyapunov function of the combined system and its derivative, and are used to assess the control effect of various damping devices quantitatively. The accuracy of the proposed procedure is confirmed by applying it to a structure with nonlinear as well as linear passive/active control systems.

• Architectural research
• /
• 제4권1호
• /
• pp.45-52
• /
• 2002

Selection procedures of earth retention systems are increasingly complex and directly related to the serviceability of the retaining structure selection systems since significant changes in earth retention technology motivates the review of design, and selection processes of earth retaining structures. Collection and classification of retaining structure selection knowledge are key issues because two expert groups, geotechnical and structural engineers, are mainly involved in the retaining structure selection. The course of natural tendency of expert knowledge are investigated considering the decision factors. The decision factors for selecting retaining structures are divided into four categories: application of the structure, and spatial, behavior, and economic constraints.

• 한국공간구조학회논문집
• /
• 제17권1호
• /
• pp.41-47
• /
• 2017

Structures of steel frame buildings getting vary depending on the development of construction technology. Fire-resistant steel beams and Columns accredited by accreditation bodies from the performance of various fire-resistant coating is applied to the current pillar method is most H-beams. H-beam has been proposed a non-load test specifications in the relevant regulations, its scope of accreditation to be granted without limitation of size H-beams from the performance of the test specification. However, in the case of the rectangular steel structure is to check its performance and to a separate one of the receive acknowledge and so take advantage of the cross-sectional shape factor in this study to test the performance of the fire-resistant structure proposed for standard test specimen.