• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.19-26
• /
• 2018

이 연구는 유공보강근의 형상에 따른 철근콘크리트 유공 보의 전단저항성능을 평가하기 위하여 4체의 실험체를 제작하여 전단실험을 수행하였다. 실험의 주요변수는 유공의 유무, 유공보강 유무, 유공 보강근의 형상으로 하였으며, 제안 유공 보강근은 시공성을 고려하여 사각형과 마름모형이 혼합된 나선형 형태이다. 실험결과, 이 연구에서 제안된 유공보강근은 유공 주변의 균열을 효과적으로 제어하여 실험체의 전단력 향상에 효과적임을 확인하였다. 또한 현행설계기준은 유공 보강근을 배근한 실험체의 실험결과를 과소평가하는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제32권5호
• /
• pp.587-608
• /
• 2009

Modern earthquake-resistant design aims to isolate architectural precast concrete panels from the structural system so as to reduce the interaction with the supporting structure and hence minimize damage. The present study seeks to maximize the cladding-structure interaction by developing an energy-dissipating cladding system (EDCS) that is capable of functioning both as a structural brace, as well as a source of energy dissipation. The EDCS is designed to provide added stiffness and damping to buildings with steel moment resisting frames with the goal of favorably modifying the building response to earthquake-induced forces without demanding any inelastic action and ductility from the basic lateral force resisting system. Because many modern building facades typically have continuous and large openings on top of the precast cladding panels at each floor level for window system, the present study focuses on spandrel type precast concrete cladding panel. The preliminary design of the EDCS was based on existing guidelines and research data on architectural precast concrete cladding and supplemental energy dissipation devices. For the component-level study, the preliminary design was validated and further refined based on the results of nonlinear finite element analyses. The stiffness and strength characteristics of the EDCS were established from a series of nonlinear finite element analyses and are discussed in detail in this paper.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.71-79
• /
• 2011

Mount Angel Abbey library shows not only the general characteristics which Aalto had shown in his 60s but also special features of his last library project. Special features of Mount Angel library are the result of considering geography and existing context of the site. General characteristics of the library mainly come from the Aalto's concept for library especially considering light. Due to steep site, Mount Angel Abbey library has multi-layered and dynamic spatial configuration. Aalto considered the importance of daylight in the library and applied various kinds of openings to induce natural light. Therefore, Mount Angel Abbey library is the final result of his library type that developed from the Viipuri library of 1930s and his architectural thoughts of 1960s. As a combination of space and light, Mount Angel Abbey library is the outcome of Aalto's unique functional thoughts which maximize the function of the library through efficient induction of natural light.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.59-60
• /
• 2020

Large fires continue to spread throughout the building, including the fire in Uijeongbu in 2015, the fire in Jecheon in 2017, and the fire in Miryang in 2018. According to the above fire case investigation, major problems were the fire resistance performance of compartment members such as fire doors, the fire spread due to damage to exterior wall openings, and smoke spread through vertical openings. However, in South Korea, only specification design is implemented for buildings that are not subject to performance design. In addition, the analysis of the fire resistance performance standards of building members in the specification design showed that fire doors were not specified in detail for 60 minutes of insulation performance and 60 minutes of fire resistance performance of E/V doors, limiting the prevention of fire spread. Therefore, the purpose of this research is to prepare measures to prevent the spread of fire by presenting simple transplants for calculating the required fire time according to the architectural design conditions for the performance design of the components of the fire room according to the purpose of use of the front of the building.

• Structural Engineering and Mechanics
• /
• 제88권5호
• /
• pp.419-437
• /
• 2023

The use of reinforced concrete (RC) shear walls (SW) as an efficient lateral load-carrying system has gained recent attention. However, creating openings in RC shear walls is unavoidable due to architectural requirements. This reduces the walls' strength and stiffness, resulting in the development of wall piers. In this study, the cyclic behavior of RC shear walls with openings, reinforced with carbon fiber reinforced polymer (CFRP) sheets in various patterns, was numerically investigated. Finite element analysis (FEA) using ABAQUS software was employed. Additionally, the retrofitting of sub-standard buildings (5, 10, and 15-story structures) designed based on the old and new versions of the Iranian Code of Practice for Seismic-Resistant Structures was evaluated. Nonlinear static analyses, specifically pushover analyses, were conducted on the structures. The best pattern of CFRP wrapping was determined and utilized for retrofitting the sub-standard structures. Various structural parameters, such as load-carrying capacity, ductility, stress contours, and tension damage contours, were compared to assess the efficiency of the retrofit solution. The results indicated that the load-carrying capacity of the sub-standard structures was lower than that of standard ones by 57%, 69%, and 67% for 5, 10, and 15-story buildings, respectively. However, the retrofit solution utilizing CFRP showed promising results, enhancing the capacity by 10-25%. The retrofitted structures demonstrated increased yield strength, ultimate strength, and ductility through CFRP wrapping and effectively prevented wall slipping.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.863-882
• /
• 2016

This study aims to introduce a new bracing system by which even super-wide frames with large openings can be braced. The proposed system, hereafter called Cable-Pulley Brace (CPB), is a tension-only bracing system with a rectilinear configuration. In CPB, a wire rope passes through a rectilinear path around the opening(s) and connects the lower corner of the frame to its opposite upper one. CPB is a secondary load resisting system with a nonlinear-elastic hysteretic behavior due to its initial pre-tension load. As a result, the required energy dissipation would be provided by the MRF itself, and the main intention of using CPB is to contribute to the initial and post-yield stiffness of the whole system. Using a stiffness calibration technique, optimum placement of the CPBs is discussed to yield a uniform displacement demand along the height of the structure. A displacement-based design procedure is proposed by which the MRF with CPB can be designed to achieve a uniform distribution of inter-story drifts with predefined values. Obtained results indicated that CPB leads to significant reductions in maximum and residual deformations of the MRF at the expense of minor increase in the maximum base shear and developed axial force demands in the columns. In the case of a typical 5-story residential building, compared to SMRF system, CPB system reduces maximum amounts of inter-story and residual drifts by 35% and 70%, respectively. Moreover, openings of the frame are not interrupted by the CPB. This is the most appealing feature of the proposed bracing system from architectural point of view.

• 한국음향학회지
• /
• 제35권6호
• /
• pp.491-500
• /
• 2016

본 논문에서는 공기를 통과시켜 풍압을 저감하면서 소음을 제어할 수 있는 새로운 개념의 방음벽의 음향감쇠 특성을 분석하였다. 통기형 방음벽의 소음저감 특성을 조사하기 위하여 우선 개구부의 크기 및 공명기의 체적 등을 변화시켜 총 17가지 방음벽 모델의 음향감쇠계수를 측정하였다. 실험결과 공명기의 체적과 개구부의 면적에 따라 음향감쇠계수 값이 달라지고 있으며, 목표 주파수대역(400 ~ 1250 Hz)에서 단일 방음벽보다 이중 방음벽의 음향감쇠계수가 더 높게 나타났다. 이를 통해 개구부 및 공명기의 물리적 특성이 통기형 방음벽의 차음특성에 영향을 미친다는 점을 밝혀냈다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권5호
• /
• pp.76-85
• /
• 2021

이 연구에서는 유공보강근의 형상에 따른 RC 유공보의 구조성능을 평가하기 위하여 전단실험을 수행하였다. 실험체는 총 4체이며, 주요변수는 유공의 유무, 유공 보강 유무, 유공 보강근의 형상이다. 이 연구에서는 사각형과 팔각형이 혼합된 나선형의 유공보강근을 개발하였으며, 이를 기존 Band형과 비교하였다. 실험결과, 제안 유공 보강근으로 유공을 보강한 실험체는 타 실험체에 비하여 최대 전단력과 최대 전단력 이후 에너지소산면적이 증가하는 것으로 나타났다. 따라서 제안 유공 보강근은 유공 주위의 균열제어와 함께 전단성능의 향상에 효과적임을 확인하였다.

• 건축역사연구
• /
• 제22권2호
• /
• pp.31-42
• /
• 2013

This study identifies the current status of hanok design process and required design information through individual survey and interview with hanok architects and builders to suggest a proposal. Current design system turns out to be a common design process not reflecting hanok's unique mechanism of production. The proposal consists of the alternative design process, 'Initial survey / Site and structural planning / Spatial layout and form / Openings, interior and exterior elements design / Detail design', containing the specialty of hanok's mechanism, and the lists of design information required in its each stage. The proposed design process also emphasizes the significance of consultation in a way of designing coordination, and classifies the specific contents for each consultation moments. The study is expected to contribute for architects including the group who are not specialized in hanok to improve the architectural quality by following the systematic design process. Also the design system provides a framework to organize the vast range of design information being recently developed in the technique-oriented area.

• 한국공간구조학회논문집
• /
• 제20권3호
• /
• pp.71-79
• /
• 2020

In this paper, the hybrid prefabricated retrofit method that improve structural performance and reduce construction period was developed by using a finite element analysis. The hybrid prefabricated retrofit method consist of a Z-shaped side plate, a L-shaped lower plate, and a bottom plate containing an steel plate with openings. This shape has advantage that a retrofit method is possible regardless of the size of the beams and a follow-up process such as reinforcement bars placing are not required. The finite element analysis of hybrid Prefabricated retrofit method showed the most ideal stress distribution when the thickness of bottom plate was 10mm, the thickness of the L-shaped lower plate was 5mm, the thickness of the Z-shaped side plate was 2.5mm, and the bolt spacing was 200mm. The bending strength equation of Hybrid prefabricated retrofit method was proposed through the plastic stress distribution method in KDS 41 31 00. The result of Comparison the proposed equation with the finite element analysis, it is determined that the design of hybrid prefabricated retrofit method is possible through the KDS 41 31 00.