Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Shear Performance of Reinforced Concrete Beams for Varying Reinforcement Details of Web Opening

유공부 보강상세에 따른 철근콘크리트 유공 보의 전단 성능 평가

  • Received : 2017.12.15
  • Accepted : 2018.06.29
  • Published : 2018.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study evaluates the shear performance of reinforced concrete members with web opening reinforcement. A total of 4 reinforced concrete members with or without openings were cast then tested. The main variables investigated were with or without of web openings and with or without of web opening reinforcement, respectively. The proposed web opening reinforcement was a rectangle and rhombus-shaped spiral considering of construct ability. Test result showed that the proposed web reinforcement had improved shear capacity and ductility of the specimens. It was found that the web opening reinforcement proposed in this study had a positive effect on the shear strength and crack control of RC beams with web openings. In addition, it was confirmed that the analytical results by the current design codes underestimates the test results of the specimens with the proposed web opening reinforcement.

이 연구는 유공보강근의 형상에 따른 철근콘크리트 유공 보의 전단저항성능을 평가하기 위하여 4체의 실험체를 제작하여 전단실험을 수행하였다. 실험의 주요변수는 유공의 유무, 유공보강 유무, 유공 보강근의 형상으로 하였으며, 제안 유공 보강근은 시공성을 고려하여 사각형과 마름모형이 혼합된 나선형 형태이다. 실험결과, 이 연구에서 제안된 유공보강근은 유공 주변의 균열을 효과적으로 제어하여 실험체의 전단력 향상에 효과적임을 확인하였다. 또한 현행설계기준은 유공 보강근을 배근한 실험체의 실험결과를 과소평가하는 것으로 나타났다.

Keywords

References

  1. ACI Committee 318. (2014), "Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary", American Concrete Institute, Farmington Hills.
  2. Ahmed A., Fayyadh M. M., Naganathan S., Nasharuddin K. (2012), Reinforced concrete beams with web openings: a state of the art review. Materials and Design, 90-102.
  3. Architectural Institute of Japan. (2010), AIJ standard for Structural Calculation of Reinforced Concrete Structure, Architectural Institute of Japan, Tokyo.
  4. Bower, John E. (1968), Design of Beams with Web Openings, ASCE Journal of the Structural Division, 94(3), 783-807
  5. Heller, S. R. (1951), The stress around a small opening in a beam subjected to bending with shear, Proceedings of 1'st National congress of Applied Mechanics, American Society of Mechanical Engineers, Illinois, 239-245.
  6. Land Housing Institute (Korea). (2015), Development of Reinforced Concrete Beams with Web Opening Details for Reduced Story height of LH Frame apartment buildings, Land Housing Institute, Daejeon, 3-7.
  7. Lorenstren, M. (1962), Holes in Reinforced Concrete Girders, Byggmdstren, 41(7), 141-152.
  8. Mansur M.A. (2006), Design of reinforced concrete beams with web openings, Proceedings of the 6th Asia-Pacific Structural Engineering and Construction Conference (ASPEC 2006), Kuala Lumpur, 104-120.
  9. Mansur, M. A, Tan, K. H and Lee, S. L. (1985), Design Method for Reinforced Concrete Beams with Large Openings, American Concrete Institute Journal, 82(4), 517-524.
  10. Mansur, M. A. (1983), Combined Bending and Torsion in reinforced Concrete Beams with Rectangular openings, Concrete International: Design and Construction, 5(11), 51-58.
  11. Nasser, K. W., Acavalos, A., and Daniel, H. R. (1967), Behavior and Design of Large Openings in Reinforced Concrete Beams, American Concrete Institute Journal, 64(1), 25-33.