• 제목/요약/키워드: Arch shape

검색결과 249건 처리시간 0.024초

일부 대학생의 사용잇솔 분석과 잇솔규격에 관한 연구 (Study of the standardization of toothbrush and analysis of some university students using a toothbrush)

  • 김설희
    • 한국산학기술학회논문지
    • /
    • 제15권8호
    • /
    • pp.5109-5115
    • /
    • 2014
  • 본 논문은 치열궁 변화에 따른 잇솔규격 변화의 필요성을 연구하고자 일부 대학생을 대상으로 사용하고 있는 잇솔을 수집하여 잇솔의 각 부위별 규격을 측정하고, 치열궁을 측정하여 성인의 구강환경에 적합한 잇솔규격기준을 마련하는 기초자료를 제안하고자 하였다. 그 결과 잇솔 종방향은 25 mm이내, 잇솔 횡방향은 11 mm이내의 잇솔 개발이 요구되었다. 잇솔이 모든 치면에 적용되어 치면세균막 관리에 적합한 잇솔 선정을 위해서는 잇솔규격 변화와 함께 올바른 잇솔을 선정할 수 있는 전문가의 교육도 필요하다.

The Structural Engineering Design And Construction Of The Tallest Building In Europe Lakhta Center, St. Petersburg. Russia

  • Abdelrazaq, Ahmad;Travush, Vladimir;Shakhvorostov, Alexey;Timofeevich, Alexander;Desyatkin, Mikhail;Jung, Hyungil
    • 국제초고층학회논문집
    • /
    • 제9권3호
    • /
    • pp.283-300
    • /
    • 2020
  • The Lakhta Center is a Multifunction Complex Development (MFCD) consisting of 1) an 86 story office tower rising 462 m above the ground to provide high-end offices for Gazprom Neft and Gazprom Group affiliates 2) a Multi-Function Building (MFB) that includes, a scientific/educational center, a sport center, a children's technopark, a planetarium, a multi-transformable hall, an exhibition center, shops, restaurants, and other public facilities 3) a Stylobate 4) "The Arch, which forms the main entrance to the tower, restaurants, and cafes 5) underground parking and 6) a wide range of large public plazas. While each of the MFCD buildings is technically challenging in its own right, the focus of the paper is to present the development and integration of the structural and foundation systems of the bowed, tapered, and twisted shape of the tower into the fabric of the tallest Tower in Europe.

플라스틱 온실의 폭설피해 방지를 위한 가지주 장치 개발 (Development of a Temporary Pole Supporting System to Protect the Plastic Greenhouses from Heavy Snow Damage)

  • 남상운
    • 한국농공학회지
    • /
    • 제44권4호
    • /
    • pp.107-113
    • /
    • 2002
  • The pipe framed and arch shape plastic greenhouse, which is the most popular greenhouse in Korea, is relatively weak in snowdrift. Reinforcement of rigid frame or column is required to reduce the damage from heavy snow in this type. But additional rigid frames or columns decrease light transmissivity or workability, and increase construction cost. So it is desirable to prepare some temporary poles and to install them when the warning of heavy snow is announced. This study was carried out to develop the temporary pole supporting system using galvanized steel pipes for plastic housing and to evaluate the safe snow load on a temporary pole. A pipe connector, which is inserted in the top of pipe used in the temporary pole and supports the center purline, was designed and manufactured to be able to carry the upper loads safely. And a bearing plate was safely designed and manufactured in order to carry the loads acting on it to the ground. When temporary poles of ${\phi}$ 25 pipe are installed at 2.4m interval, it shows that the single span plastic greenhouses with 5~7 m width are able to support the additional snow depth of 13.9~25.3 cm beyond the snow load supported by main frame.

안전하고 효과적인 광대축소술 (Safe and Effective Reduction Malarplasty)

  • 강영호
    • 대한치과의사협회지
    • /
    • 제58권2호
    • /
    • pp.103-113
    • /
    • 2020
  • Background: Reduction malarplasty is one of the most popular facial contouring surgeries in east Asia for making patients' faces smaller. Currently in Korea, reduction malarplasty surgeries are performed mostly at plastic surgery clinics, but few cases are done at oral and maxillofacial surgery clinics. The reason might be because of post-operative complications after reduction malarplasty, such as undercorrection, overcorrection, asymmetry, cheek drooping, malunion, pain and noise. Those complications should be uneasy to be handled by oral and maxillofacial surgeons, however, they can be prevented by knowing the effective and safe reduction malarplasty techniques. Therefore, in this article the author as an oral and maxillofacial surgeon, would like to suggest safe and effective surgical methods for reduction malarplasty customized for Korean patients. Method: L- shape osteotomy of zygomatic body was performed with intraoral approach via vestibular incision, and the zygomatic arch was osteotomized with extraoral approach via sideburn incision. Then zygomatic complex was separated and rotated mesio-superiorly without removal of a bony strip and fixed with miniplates and microplates without making a bony gap. Conclusion: Surgical results were favorable and satisfied by the patients without cheek drooping, malunion, undercorrection and asymmetry.

  • PDF

디지털 치의학 시대의 교합 (Occlusion and articulation in digital dentistry: A review)

  • 이재현
    • 대한치과의사협회지
    • /
    • 제58권8호
    • /
    • pp.505-512
    • /
    • 2020
  • With the fourth industrial revolution, digitization is accelerating in all healthcare areas. In the field of dentistry, active discussions on digital dental technologies are ongoing, with increasing interest from clinicians daily. Thus far, accuracy and efficiency have primarily been emphasized in digital dentistry, and interest in occlusion has been relatively low. This is because digital dentistry has been predominantly used to restore small numbers of teeth rather than extensive prosthetic reconstruction. However, in the future, most dental treatments will undergo a digital transformation that will require the application of digital technology to more extensive prosthetic rehabilitation, for which discussion of occlusion is essential. In extensive prosthetic reconstruction, occlusion and articulation involve determining the position of the dental arch in relation to the reference plane of the skull or the long axis of the face and the position of the transverse horizontal axis. It also includes determining an occlusal surface with a shape that allows the mandible to move in an eccentric path and masticate most efficiently without any occlusal interference. To better understand how digitization will impact dentistry, this review article summarizes and discusses occlusion and articulation using digital dental technologies. This discussion is divided into several aspects, including facial scan, virtual articulation, augmented reality, and virtual reality.

  • PDF

Nondestructive damage evaluation of a curved thin beam

  • Kim, Byeong Hwa;Joo, Hwan Joong;Park, Tae Hyo
    • Structural Engineering and Mechanics
    • /
    • 제24권6호
    • /
    • pp.665-682
    • /
    • 2006
  • A vibration-based nondestructive damage evaluation technique for a curved thin beam is introduced. The proposed method is capable of detecting, locating, and sizing structural damage simultaneously by using a few of the lower natural frequencies and their corresponding mode shapes before and after a small damage event. The proposed approach utilizes modal flexibilities reconstructed from measured modal parameters. A rigorous system of equations governing damage and curvature of modal flexibility is derived in the context of elasticity. To solve the resulting system of governing equations, an efficient pseudo-inverse technique is introduced. The direct inspection of the resulting solutions provides the location and severity of damage in a curved thin beam. This study confirms that there is a strong linear relationship between the curvature of modal flexibility and flexural damage in the selected class of structures. Several numerical case studies are provided to justify the performance of the proposed approach. The proposed method introduces a way to avoid the singularity and mode selection problems from earlier attempts.

Nonlinear analyses of steel beams and arches using virtual unit moments and effective rigidity

  • Koubova, Lenka;Janas, Petr;Markopoulos, Alexandros;Krejsa, Martin
    • Steel and Composite Structures
    • /
    • 제33권5호
    • /
    • pp.755-765
    • /
    • 2019
  • This study examined geometric and physical nonlinear analyses of beams and arches specifically from rolled profiles used in mining and underground constructions. These profiles possess the ability to create plastic hinges owing to their robustness. It was assumed that displacements in beams and arches fabricated from these profiles were comparable with the size of the structure. It also considered changes in the shape of a rod cross-section and the nonlinearities of the structure. The analyses were based on virtual unit moments, effective flexural rigidity of used open sections, and a secant method. The use of the approach led to a solution for the "after-critical" condition in which deformation increased with decreases in loads. The solution was derived for static determinate beams and static indeterminate arches. The results were compared with results obtained in other experimental tests and methods.

치아의 활주 이동시 브라켓 폭이 브라켓과 호선 사이의 마찰력에 미치는 효과 (The effect of bracket width on frictional force between bracket and arch wire during sliding tooth movement)

  • 최원철;김태우;박주영;곽재혁;나효정;박두남
    • 대한치과교정학회지
    • /
    • 제34권3호
    • /
    • pp.253-260
    • /
    • 2004
  • 치아의 활주 이동시 교정용 브라켓과 호선 사이의 마찰력은 많은 요인들, 예를 들면 브라켓과 호선의 크기, 형태 그리고 재료, 결찰방법 그리고 브라켓-호선간 각도 등과 관련이 있다. 이런 요인들 대부분에 관하여 명확한 결론이 내려져 있지만 브라켓 폭이 마찰력에 미치는 효과에 관해서는 논란이 있다. 이번 연구는 임상에서와 비슷한 모의 치아 이동시 브라켓 폭이 발생되는 마찰력의 양에 미치는 효과를 조사하기 위해 고안되었다. 폭이 다른 세 가지 브라켓 $(0.018{\times}0.025\;standard)$ 즉 좁은 것 (2.40mm), 중간 것 (3.00mm), 그리고 넓은 것(4.25mm) 등을 $0.016{\times}0.022$ 스테인레스 스틸 호선과 함께 사용하였다 세 가지 브라켓-호선 조합들은 분속 0.5mm로 4분 동안 장치 에서 움직이도록 하였고 각각 7회씩 반복 측정하였다. 생물학적인 상태를 재현하기 위해 치 아 치조 모형은 치근막과 유사한 탄성을 갖는 재료를 이용하는 간접법으로 제작되었다. 게다가 결찰력의 효과를 최소화하기 위하여 브라켓에 레진을 덧붙여서 고무로 결찰함으로써 브라켓 폭의 차이를 보상해주었다. 결과는 다음과 같다: 1. 각 브라켓-호선 조합의 최대 마찰력은; 좁은것(2.40mm): $m4.69gmf$ 중간것 (3.00mm): $72.7\pm54.98gmf$ 넓은것(4.25mm): $72.5\pm94.54gmf$ 2. 호선이 브라켓 슬롯을 지나서 나아갈수록 마찰력은 증가하였다. 3. ANOVA 사후검정 결과 임상과 비슷한 모의 실험에서 브라켓 폭은 마찰력에 아무런 영향을 미치지 않았다(p>0.05).

삼국시대(三國時代) 병기체제(兵器體制)의 연구(硏究) (This Study of the Arms Used in the Three Kingdoms)

  • 김성태
    • 헤리티지:역사와 과학
    • /
    • 제34권
    • /
    • pp.20-58
    • /
    • 2001
  • In order to unravel the characteristics of arms used in the 'Three Kingdoms,' Kokuryo, Silla and Paikje. the classification and the developing procedures of the arms should be first discussed. At first, the basic arms of the soldiers of Three Kingdoms were iron swords, iron spearheads, and bows. During that period, swords attached a ring pommel were commonly used. But after 5A. D. a sword with a decoration pommel appeared. Infantry generally used iron spearheads. From the late 4A. D. the long spearheads were broadly used in cavalry battles. In the late 6A. D. infantry mainly used long spearheads, and this resulted in the foundation of long spearheads units. There were two kinds of bows: Short Bow whose arch is small and Long Bow whose arch is long. It is known that the Short Bow was widely used in Kokuryo and Paikje up to 5A. D. In the early era, infantry used Long Bow, yet it was vastly used after 6A. D. when a castle's strategical value was great and defending a castle was. significant. Above mentioned, as basic combat weapons, iron spearhead and bow were fundamental. In particular, the spearhead was the essential weapon to a soldier. Yet, arrow gun and hook-shape cutters were important weapons. Especially, after 6A.D., when a castle became strategically pivotal in military, the arrow gun became the important weapon. This resulted in the foundation of arrow gun units. Hook-shape cutters were used to snatch horsemen or to climb up to fall the castle. Yet, the cutter was not the Three Kingodoms' basic weapon. In addition, the three stages of arms development in the Three Kingdoms are formation stage, development stage, and settlement stage. The formation stage was the period when premitive military unit appeared in the Three Kingdoms. It ranged from 1B. C. to the mid 3A. D. At that time according to regions. there were two weapon systems operating: North area including Kokuryo and the northern part of Paikje and South area including Silla, Kaya and the southern part of Paikje. ln North area a sword with a ring attached at the end of the holder, iron spear with neck and mid-size flat holder and iron arrowhead with an extension to fix, were used. In this period, during a war calvary units were mostly used and their weapon systems seemed possibly to succeed in that of Kochosun. In the development stage, when LoLang's influence on surroundings became weak, Koguryo, Paikjae and Silla had directly contacted each other. In the late 3A.D. to the early 6A.D., Silla achieved a drastic improvement in weapon system. This was the period when Kokuryo played a leading role in arms race. Kokuryo's arms manufacturing techniques passed onto Silla, Kaya and Paikje. In combat strategy a joint operation between infantry and calvary prevailed even if their military tactics were different. In a calvary battle heavily armed horsemen played import roles at this period. The horsemen and even horses were heavily guarded with iron armors. After all, the appearance of fully armed horsemen implies the very need of powerful destructive forces in weapon system. At that time, basic weapons were a big sword with a ring attached at the end of the holder, swallow's tail-shape spear with neck, and iron spearhead with neck and an extension. The settlement stage began at the mid 6A.D., when it was the revolutionary period in the arms development history. Of course, actual proofs and picture documents were not sufficient enough to penetrate full scale of the weapon system. But, according to historical circumstances and historic records, it is very certain that this period was the peak in arms development. In this period special military units, such as infantry-calvary companies, Archery units and Long spear units, that executed particular duties with special weapons, were founded. This became the characteristics of the settlement stage.

안면비대칭과 상악치열궁형태의 연관성에 관한 연구 (The relationship between facial asymmetry and maxillary dental arch shape)

  • 김동우;손우성
    • 대한치과교정학회지
    • /
    • 제27권3호
    • /
    • pp.445-456
    • /
    • 1997
  • 본 연구는 안면비대칭이 존재하는 사람에 있어서 상악치열궁의 좌우측 치아에서 전후방, 측방 그리고 수직 비대칭의 존재 유무와 상악 중절치의 치축경사 변화 정도및 이러한 비대칭 양상과 하악골의 편위 정도와의 상관성을 알아보고 정상군과의 비교를 통하여 상대적인 비대칭의 양상을 파악하고자 고안되어졌다. 부산대학교병원 교정과에 내원한 환자들 중 하악골의 편위를 동반한 골격성 비대칭을 가진 21명을 안면비대칭군으로 선정하고 임상적으로 양호한 안모를 가지고 골격성의 비대칭이 없는 20명을 정상군으로 선정한 후 상악치열궁모형과 정모두부방사선규격사진을 이용하여 상악치열궁을 이루는 좌우측 치아의 위치와 상악 중절치 치축경사, 그리고 상악 제1대구치의 수직위치를 계측하고 분석하여 다음과 같은 결과를 얻었다. 1. 안면비대칭군에서 치성 비대칭의 정도와 하악의 편위정도 사이에는 높은 상관성을 나타내지 않았다. 2. 안면비대칭군에서 악골이 편위된 측의 치아들이 더 측방으로 확장되어 있었다. 그리고 상악 제1대구치와 제2대구치의 전후방위치와 상악 중절치의 치축경사에서 차이가 있었다. 3. 안면비대칭군에서 측방 비대칭은 후방치아로 갈수록 증가되었으며 전후방 비대칭에 비해 더 크게 나타났다.

  • PDF