• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.247-254
• /
• 2010

유리섬유강화 폴리에스터(GFRP) 복합소재는 가볍고 내구성이 뛰어나 강재, 콘크리트, 나무 등과 같은 기존의 구조 재료들을 대체할 수 있는 재료로 최근 각광 받고 있다. 이러한 복합소재를 활용하기 위해 쉽게 조립할 수 있는 수직결구식 복합소재 데크를 활용한 아치가교 유형을 선행 연구에서 제안하였고 유한요소해석을 통해 검증하였다. 이 논문에서는 선행연구에서 제안된 볼트결합에 의한 복합소재 데크 조립식 아치가교의 안전성 및 사용성을 구조성능시험을 통해 검증하여 문제점을 파악하고 그 문제점을 해결하기 위해 개선된 아치가교 유형을 제안한다.

• 한국전산구조공학회논문집
• /
• 제21권3호
• /
• pp.217-223
• /
• 2008

유리섬유강화 폴리에스터(GFRP) 복합소재는 가볍고 내구성이 뛰어나 강재, 콘크리트, 나무 등과 같은 기존의 구조 재료들을 대체할 수 있는 재료로 최근 각광 받고 있다. GFRP 복합소재 데크를 조립하여 아치가교를 만들면 짧은 시간에 시공이 가능하고 복합소재 데크의 재사용이 가능할 수 있다. 이 논문에서는 쉽게 조립할 수 있는 수직결구식 복합소재 데크를 활용한 아치가교 시스템을 개발하고자 한다. 이를 위해 몇 가지 가능한 아치가교의 유형을 제안하고 이를 유한요소해석을 통해 검증한다.

• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.567-583
• /
• 2013

Experimental studies and finite element analyses have been carried out to establish the effect of tendon damage on the structural behavior of concrete filled tubular tied arch girder (CFTA girder). The damage of tendon is considered in different stages by varying the number of damaged cables in the tendon. Static and dynamic structural parameters are observed at each stage. The results obtained from the experiments and numerical studies have been compared to validate the studies. The tendons whose damage can significantly affect the stiffness of the CFTA girder are identified by performing the sensitivity analysis. The locations in the girder which are sensitive to the tendon damage are also identified.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.229-233
• /
• 2003

This paper describes a practical formulation of Non-Bernoulli-Compatibility Truss Model. Not only equilibrium conditions but also some approximations are employed to solve for the unknowns included in the proposed model. By assuming that the ratio of $V_a$ to V remains to be constant along the shear span, the relationship between $\alpha$ and z is mathematically established as an arch shape function. $V_m$ is also approximated to be an empirical value that is equal to the least membrane shear strength. The coefficient a is made utilizing a nonlinear finite element analysis. The adequacy of the model is examined by test results available in literatures, and the predicted values are shown to be in excellent agreement with the experimental results.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.191-199
• /
• 1999

A Precast frame system with hybrid beam-column connections was proposed in this study. An analytical study evaluated the system under seismic loadings. Four buildings with different heights were modeled in which each building had three types of joint details (A. B, C). Thus, twelve buildings were examined with variables such as building height and joint detail. Four earthquake records were applied to the buildings as input ground motions. All the records were normalized to the intensity of 0.25g to assess behavior under the same intensity of seismic excitation. All the joint types showed almost identical results except for the Mexico earthquake which was scaled up from 0. 1g to 0.25g. Buildings with the type C joint exhibited the largest deflection for the Mexico earthquake. It was concluded that type B joint could be used in a high seismic zone and the type C joint could possibly be used in the regions of low to medium seismic activity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.299-304
• /
• 1995

An equation is proposed to predict ultimate shear strength. The equatiion on ultimate shear strength, which is purely based on analytical premises, is similar form to ACI code(11-6) which is derived mainly from empirical approach. Furthermore, the strength predicted by the proposed equation show better correlation with the tested values than the values calculated by Zsutty's formula.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.209-212
• /
• 2005

This paper presents, basic concepts on deformation models for D-regions critical to shear. Strut-and-tie models are used to construct for deformation estimation at yielding and ultimate deformation. A generic: strut-and-tie model is proposed to investigate deformation patterns and failure mode identification. Superposition of the basic models enables us to explain deformation limits of arch action and truss action. Displacement at yielding is assessed by consideration of deformation of reinforcing steel only while the ultimate displacement is calculated by limits of ultimate strain of concrete in compression and failure mechanisms.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.374-377
• /
• 2006

The measured longitudinal reinforcement tensions in the shear-critical RC beams were significantly higher than the calculated values by the beam theory. This may be attributed to the reduction of the internal-moment arm length by the development of the arch action. In this paper, the measured longitudinal reinforcement tensions in the test performed by Kim were compared with those predicted by the new truss model on the basis of the compatibility condition of the shear deformation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.273-276
• /
• 2006

This paper presents shear deformation characteristics in reinforced concrete beams. Based on the relationship between shear and bending moment in beams subjected to combined shear and bending, the behavior of a beam is explicitly divided into two base components of the flexural action and the tied arch action. Transverse elongation of the web and deflections are calculated from shear compatibility condition in a beam and compared with test results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.181-184
• /
• 2008

단순지지된 콘크리트 보 부재의 경우 전단 경간에서 내부 모멘트 팔길이가 변화하는 아치 현상이 발생하게 된다. 최근 이러한 점을 고려한 전단해석모델이 개발되었으나 집중 하중에 대해서만 적용할 수 있어 등분포 하중과 같은 보다 일반적인 하중에 대해서는 적용할 수 없는 실정이다. 따라서 본 연구에서는 일반적인 분포하중에 대해 내부 모멘트 팔길이의 변화에 대한 기본 식을 유도하고, 특히 등분포하중이 작용할 경우 아치 작용에 의한 전단력의 비율을 산정하는데 있어 이용되는 전단변형적합 조건을 도출하였다. 제안된 해석 모델을 이용하여 기존 연구자가 수행했던 RC보를 해석하여 그 경향을 분석한 결과, 등분포하중을 받는 RC보의 경간에 따른 전단변형률의 변화를 어느 정도 잘 묘사하는 것으로 나타났다. 하지만, 전단변형률이 작게 예측되는 것으로 보아 아치 작용에 의한 전단력의 영향을 추가적으로 고려해야 할 것으로 사료된다.