• Advances in Traditional Medicine
• /
• v.7 no.5
• /
• pp.549-555
• /
• 2008

Bupleuri radix (Umbelliferae), the dried root of Bupleurum Chinense DC, has been clinically used to mitigate pain sensation. The descending pain control system consists of three major components, and modulation of pain in the periaqueductal gray is the most extensively studied descending pain control system. However, the relation of Bupleuri radix on the descending pain control system has not been clarified. In the present study, modulation of the aqueous extract of Bupleuri radix on glycine-induced ion current in the acutely dissociated periaqueductal gray neurons was investigated by using nystatin-perforated patch-clamp technique under voltage-clamp condition. In the present results, the glycine-induced ion current was significantly suppressed by 0.1 mg/ml Bupleuri radix, while treatment with $10^{-5}\;M$ naltrexone, opioid receptor antagonist, alleviated Bupleuri radix-induced inhibition on glycine-induced ion current. The present study showed that the aqueous extract of Bupleuri radix may activate descending pain control system through inhibition on glycine-induced ion current in the periaqueductal gray neurons and this effect is mediated by opioid receptors.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.216-225
• /
• 1995

Simulation for a dynamic analysis of the electrolytic preparation of U(IV) in two-phases system, which consisted of mass transfer of U(VI) from TBP phase into HNO$_3$ solution and electrolytic re-duction of U(VI) to U(IV) at a cathode in aqueous phase, was carried out in order to establish the most suitable operating condition and best electrode area as basic design data for the system. It was found that maintaining an appropriate mass transfer rate was more significant rather than enlarging the surface area of the cathode for more effective production yield of U(IV). The electrode area and the operation time affected deeply the production composition of U(IV) in the resulting aqueous phase. And optimal electrode areas ore evaluated to meet production criteria of U(IV) of resulting solution in several system conditions. Though about 0.37M HNO$_3$ was preferable to prepare the solution of U(IV), nitric acid concentration should be higher than 0.5M to prevent a hydrolysis of U(IV) in the aqueous phase.

• YAKHAK HOEJI
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2006

The purpose of the present study was to formulate the aqueous solution of 1-cyclopent-3-enylmethyl-6(3,5-dimethyl-benzoyl)-5-ethyl-1H-pyrimidine-2,4-dione (CPD), a novel antivirus compound containing pirimidine structure. For this purpose, the effects of various solubilization agents such as cosolvents [ethanol, propylene glycol (PG), polyethylene glycol 300 (PEG 300), polyethylene glycol 400 (PEG 400), glycerin], surfactants (Tween 80, Cremophor$^{(R)}$ RH40, Cremophor$^{(R)}$ EL, Poloxamer 407, Poloxamer 188) and a complexation agent [hydroxypropyl-${\beta}$-cyclodextrin (HPBCD)] , on the solubility of CPD in aqueous solution were evaluated. The solubility of CPD in water was under $1\;{\mu}g/ml$ at $20^{\circ}C$. Cosolvents such as ethanol, PG, PEG 300, PEG 400 and glycerin did not enhance the solubility of CPD at the $0{\sim}40\%$ concentration range. The solubility of CPD was significantly elevated by the addition of cosolvents over the $80\%$ concentration range. On the other hand, tween 80, Cremophor$^{(R)}$ L, Cremophor$^{(R)}$ RH40, and HPBCD showed enhanced effects on the solubility of CPD. The enhanced effects of Poloxamer 407 or Poloxamer 188 on the CPD solubility were less pronounced compared with tween 80, Cremophor$^{(R)}$ L or Cremophor$^{(R)}$ RH40. As a results, tween 80 aqueous solution was selected as an optimum solvent system. The aqueous solutions containing $20\%$ tween 80 were formulated as a dosing solution containing CPD for its intraperitoneal and intrahypodermic administration, respectively, The formular showed physical stability after stored for 7 days at $4^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.5
• /
• pp.385-391
• /
• 2004

The purpose of the present study was to formulate the aqueous solution of $20-O-{\beta}-D-glucopyranosyl-20(S)-protopanaxadiol\;(IH-901)$, an intestinal bacterial metabolic derivative from Ginseng protopanaxadiol saponin. For this purpose, the effects of various solubilization agents such as cosolvents [ethanol, propylene glycol (PG), polyethylene glycol 300 (PEG 300), polyethylene glycol 400 (PEG 400), glycerin], surfactants $(Tween\;80,\;Cremophor^{\circledR}\;RH40,\;Cremophor^{\circledR}\;EL,\;Poloxamer\;407,\;Poloxamer\;188)$ and a complexation agent $[hydroxypropyl-{\beta}-cyclodextrin\;(HPBCD)]$, on the solubility of IH-90l in aqueous solution were evaluated. The solubility of IH-901 in water was under $1\;{\mu}g/ml\;at\;20^{\circ}C$. Cosolvents such as ethanol, PG, PEG 300, PEG 400 and glycerin did not enhance the solubility of IH-901 at the 0 - 40% concentration range. The solubility of IH-901 was significantly elevated by the addition of cosolvents over the 80% concentration range. On the other hand, tween 80, $Cremophor^{\circledR}\;EL,\;Cremophor^{\circledR}\;RH40$ and HPBCD showed enhanced effects on the solubility of IH-901. The enhanced effects of Poloxamer 407 or Poloxamer 188 on the IH-901 solubility were less pronounced compared with $Cremophor^{\circledR}\;EL\;or\;Cremophor^{\circledR}\;RH40$. As a results, $Cremophor^{\circledR}$ aqueous solution was selected as an optimum solvent system. The aqueous solutions containing 10% $Cremophor^{\circledR}\;EL$ and 7% $Cremophor^{\circledR}\;RH40$ were formulated as dosing solutions containing 5.0 mg/ml of IH-901 for its intravenous and oral administration, respectively. The formular showed physical stability after stored for 7 days at $4^{\circ}C$.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.73-76
• /
• 2000

A novel, continuous bioreactor system combining a bubble column (absorption section) and a two-phase bioreactor (degradation section) has been designed to treat a gas stream containing benzene. The bubble column contained hexadecane as an absorbent for benzene, and was systemically chosen considering physical, biological, environmental, operational and economic factors. This solvent has infinite solubility for benzene and very low volatility. After absorbing benzene in the bubble column, the hexadecane served as the organic phase of the two-phase partitioning bioreactor, transferring benzene into the aqueous phase where it was degraded by Alcaligenes xylosoxidans Y234. The hexadecane was then continuously recirculated back to the absorber section for the removal of additional benzene. All mass transfer and biodegradation characteristics in this system were investigated prior to operation of the integrated unit, and these included: the mass transfer rate of benzene in the absorption column, the mass transfer rate of benzene from the organic phase into the aqueous phase in the two-phase bioreactor, the stripping rate of benzene out of the two-phase bioreactor, etc. All of these parameters were incorporated into model equations, which were used to investigate the effects of operating conditions on the performance of the system. Several experiments were conducted to show the feasibility of this system. This process is believed to be very practical for the treatment of high concentrations of gaseous pollutants.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.71-81
• /
• 2000

The water-based ink has lately attracted considerable attention because of problems of energy and population. Carbon blacks have been widely utilized in water-based systems to provide pigmentation. One of the most important factors in the successful formulation of an aqueous system containing carbon black is the dispersion and the selection and proper utilization of the dispersing agent. This is similar to water-based ink. This paper discusses dispersion of carbon black with the factors affecting the dispersing agent requirement (DAR) and describes a laboratory method for determining it. Variables that affect the dispersion, such as structure, surface area, and oxidation level of the carbon black are examined through test data. Anionic and nonionic dispersing agents are evaluated using the DAR method. From this study, the increased surface area, the increased DAR is indicated. DAR is indicated to depend on HLB(Hydrophilic Lipophilic Balance) of dispersing agent and pH of dispersing system.

• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.511-515
• /
• 2000

The effect of Ba2+ ion dissolution with different pH and amount of PAA on microstructural changes of green and sintered bodies and its electrical properties was studied in aqueous nano-size BaTiO3 slurry system. The dissolution of Ba2+ was least at strong base, pH 10.8 and by addition of amount of 0.15 wt% PAA. The green body with the lowest of dissolution of Ba2+ at pH 10.8 and 0.15 wt% PAA had minimum values of average pore size, 40nm and shown high increase of sintered density. The compact sintered at 125$0^{\circ}C$ for 2 hr with highest Ba2+ dissolution had low density and dielectric constant due to abnormal grian growth. However, the sintered body with the lowest Ba2+ dissolution had high sintered density and then shown high dielectric constant.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.294-302
• /
• 1997

Falling-film evaporation experiments for aqueous solution of lithium bromide (LiBr) were performed on a horizontal smooth 19.05-mm-dia copper tube. Average heat transfer coefficients were obtained with varied film Reynolds numbers, system pressures, LiBr concentrations and degrees of wall superheat. Heat transfer coefficients increase with increasing system pressure and decreasing concentration. For degrees of wall superheat, the heat transfer coefficient did not't show the distinct trend. For this experimental ranges, heat transfer coefficients showed maximum values at an optimal film Reynolds number. The results of this work were compared with pool boiling data reported previously, and it was shown that the heat transfer performance is superior to the pool boiling.

• Journal of Power System Engineering
• /
• v.20 no.1
• /
• pp.42-49
• /
• 2016

This study showed that on-site ferrate(VI) solution was synthesized by wet oxidation method and applied aqueous 2,4-dichlorophenol(DCP) solution to evaluate the degradation efficiency. On-site ferrate(VI) solution was synthesized by putting $FeCl_3{\cdot}6H_2O$ in the strong alkali solution with NaClO and NaOH and applied DCP solution directly. DCP solution was extracted by the liquid-liquid method and analyzed by GC-ECD. The factors such as pH, DCP initial concentration, injected ferrate(VI) dosage, temperature were investigated. The optimum pH and temperature conditions of DCP degradation were obtained in neutral condition and $35^{\circ}C$. And the experimental results showed that DCP removal efficiency also increased with the decrease of DCP initial condition and the injected ferrate(VI) dosage.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.234-240
• /
• 2005

In this study, we have prepared three kinds of enteric tablet coating formulations for prevention the crack incidence and enhanced process improvement of enteric tablet using aqueous system. we determined the mechanical strength of three formulatons on the enteric film-coating process. The compared experiment of one-layer and two-layer (A), (B) coating treated having placebo tablets without breakline and logo. In result, the breaking force time of two-layer (B) film strength was found to increase 0.8min than two-layer (A). We confirmed the half reduction of working hour and the simplification in the one-layer coating process, and the coating troubles was solved as setting up a dehumidifier in inlet of coater. In result, we recovered that optimum running capacity(g/kg) of dehumidifier is 10g/kg and below.