• 한국광물학회지
• /
• 제5권2호
• /
• pp.61-71
• /
• 1992

화산 유리질 암석인 진주암을 대상으로 60-150${\circ}C$의 온도 범위에서 다양한 농도의 알칼리 용액으로 수열 처리하므로서, 유리질 성분의 변질 양상 및 제올라이트의 합성 과정을 폐쇄계의 조건에서 연구하였다. 진주암을 속성 기원 제올라이트의 생성 환경에 해당되는 80${\circ}C$ 및 pH=8-12의 조건에서 100일간 처리하여도, 양간의 단순 용해 양상이 인지될 뿐 제올라이트는 합성되지 않았다. 여기서 처리 용액의 pH가 증가함에 따라, Si과 Al의 농도는 점진적으로 증가되지만 Si/Al의 농도비는 감소하는 경향을 나타내었다. 진주암을 0.1M 이상의 NaOH 용액으로 수열 처리하여 Na-P, 아날심, 체바자이트, Na-X와 같은 제올라이트를 합성하였다. 대개 100${\circ}C$를 경계로 60-100${\circ}C$의 온도 범위에서 Na-P, 그리고 100-150${\circ}C$에서 아날심이 주로 합성되었다. Na-P의 합성 과정에서 시료에 대한 용액의 혼합 조성비가 낮은 경우(<10ml/g)에 체바자이트, 그리고 처리 용액의 NaOH 농도가 높을 경우 (>3M)에 Na-X가 Na-P에 수반되어 생성되는 양상을 볼 수 있다. 제올라이트 합성 과정에 있어서 진주암질 유리의 알칼리 용액에 의한 변질은 화산 유리의 속성 변질에 의한 천연 제올라이트 생성 과정과 같은 용해${\cdot}$변질 반응(incongruent dissolution)의 형식으로 진행되는 것으로 해석된다. 그러나 반응 속도론적인 측면에서 보면, 이 실험으로부터 도출된 제올라이트의 합성 조건들은 화산 유리의 속성 변질에 의한 천연 제올라이트 생성 조건의 해석에 직접 적용될 수 없을 것으로 생각된다.

• 한국환경보건학회지
• /
• 제31권6호
• /
• pp.498-503
• /
• 2005

Stability of soybean isoflavone isomers according to extraction conditions such as temperature, pH, and extracting solvents was investigated. Heating induced three chemical reactions to occur for malony1 derivatives of isoflavones, namely decarboxylation of malony1 groups into acety1 derivatives, deesterification of malony1 residues, and hydrolysis of $\beta$-glycosidic bonds. Among the twelve isoflavone isomers, change in concentrations of acety1glycosides were most pronounced: Acety1 derivatives were present only in trace amounts in unheated hypocotyls, but the content increased dramatically during heating. As for the glycosides, concentrations of daidzin and glycitin increased due to heat treatment, though that of genistin remained almost unchanged. Heat decomposition rates and the patterns differed among the three malony1 derivatives. After 120 min at $80^{circ}C$, the relative concentrations of daidzin, glycitin and genistin were increased from $9.2\%$, $12.4\%$ and $3.3\%$ to $19.3\%$, $21.9\%$ and $6.2\%$, respectively. When crude isoflavones were solubilized in glycine buffer (pH 10.0) and incubated at $80^{circ}C$, deesterification occurred faster than at pH 7.0. When the pH of isoflavone solution was increased, the malony1glycosides were hydrolyzed to their respective glycosides at increased rate. Both acetyl and aglycone forms were unchanged and only de-esterification reactions occurred. At the acidic pH, malonylglycosides were much stable both at 60 and $80^{circ}C$. However at pH 10, $80^{circ}C$ and 1 hr, $75-80\%$ of malonylglycosides were transformed to their deesterified glycosides. When isoflavones were extracted with $60\%$ aqueous ethanol at $60^{circ}C$, isoflavone isomers were stable and the deesterification reactions did not occur in these conditions. However, at $80^{circ}C$ deesterification of malonyiglycosides occurred significantly with $15-20\%$ of malonylglycosides being hydrolyzed into their respective glycosides. This experiment showed that malonylglycosides undergo decomposition when heated or exposed to alkaline conditions. Also, aqueous ethanol was preferred to aqueous methanol as solubilizing media for obtaining extract with minimum degradation of malonylglycosides.

• 공업화학
• /
• 제7권4호
• /
• pp.768-776
• /
• 1996

카본블랙은 일반적으로 보강성, 착색성, 내후성, 내화학성 및 전기적 전도성 등의 다양한 특성을 가지고 있으나 매질과의 친화력이 낮아 이용하는데 어려움을 내포하고 있다. 따라서 본 연구에서는 카본블랙의 표면특성을 변화시켜 매질과의 친화력을 향상시키기 위하여 표면에 비교적 많은 기능기를 가지고 있는 channel black은 표면 카르복실기의 수소를 알칼리 금속과 치환하였고, 표면 기능기가 거의 존재하지 않는 furnace black은 질산으로 처리하였다. 이와 같이 표면의 특성을 변화시켜 카본블랙의 물성변화를 측정하고, 수용액 속에서의 분산특성을 연구하여 다음과 같은 결론을 얻을 수 있었다. 표면처리된 channel black의 경우 치환된 금속(Li, Na, K)의 이온반경이 증가함에 따라 입자 표면의 수화도 증가로 인하여 분산성이 향상되었고, 질산처리한 furnace black의 경우 산의 농도 및 반응온도에 비례하여 표면 기능기의 증대를 가져왔으며 반응시간에는 크게 영향을 받지 않음을 알 수 있었다. 또한 전해질 용액에서 pH 변화에 따른 제타전위를 측정한 결과 카본블랙 입자의 표면 전하밀도가 증가하고, 이에 따른 전기적 반발력 증가로 인한 분산성의 향상과 비교적 안정한 계를 이루고 있음을 확인하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권7호
• /
• pp.1053-1059
• /
• 2006

The effectiveness of a proteinaceous fibrous material formed during commercial fermentation of soy protein (PFSP) and cysteine addition were evaluated in order to improve on the properties of soy protein-based films. Nine types of films were prepared at pH 7, 9, and 11, with heat treatments at $70^{\circ}C\;and\;90^{\circ}C$ for 30 min, by casting 5% (w/w) PFSP aqueous solution, containing 2.25% (w/w) glycerol, on to polystyrene plates. The tensile strength (TS) of films ranged from 3.88 to 6.87 MPa. The highest puncture strength (PS) was observed with pH 7.0 films prepared from PFSP solution heated at $70^{\circ}C$ (P<0.05). Alkaline pH and temperature caused a decrease in both the TS and PS of the films. The thickness of films ranged from $58\;to\;74{\mu}m$. Water vapor permeabilities of the films decreased with increasing pH and temperature. To produce films from PFSP, pH value of 7.0 to 9.0 and heat treatment of $70^{\circ}C\;to\;90^{\circ}C$ were needed. A soluble nature of PFSP films in water might be useful for preparation of hot water-soluble pouches. Cysteine addition could be necessary to produce films with increased TS and enhanced barrier properties. The combination treatment that provided the best combination of barrier and mechanical properties was the PFSP film prepared at pH 7.0 with addition of 1% cysteine. The films were good oxygen barriers.

• Advances in Traditional Medicine
• /
• 제6권3호
• /
• pp.186-195
• /
• 2006

The present study was carried out to determine the involvement of opioid and non-opioid receptor and the effect of pH and enzymes on the recently reported antinociceptive activity of aqueous extract of Corchorus olitorius (AECO) leaves using the abdominal constriction test. The extract was prepared by soaking the dried powdered leaves of Corchorus (C.) olitorius in distilled water overnight, and the supernatant obtained was considered as a stock solution with 100% concentration/ strength. The extract, administered subcutaneously in the concentrations/ strength of 10, 50 and 100%, was found to show a significant concentration-independent antinociception. The 50% concentration AECO were further used to study on the above mentioned parameters. The extract exhibited: significant (P < 0.05) decreased in activity when pre-treated (s.c.) against 10 mg/kg naloxonazine, bicuculine (10 mg/kg), phenoxybenzamine (10 mg/kg), 10 mg/kg pindolol, and 5 mg/kg mecamylamme, but not 10 mg/kg naltrindole, 10 mg/kg atropine, respectively; significant (P < 0.05) decreased in activity after pre-treatment against 10% a-amylase, but not 1 % protease or 10% lipase and; significant (P < 0.05) decreased in activity after exposure to alkaline condition (pH between 9 and 13) while maintaining the activity at acidic condition, respectively. The C. olitorius leaves antinociception, which involved, at least in part, activation of $\mu-opioid,\;\alpha-and\;\beta-adrenergic$, and nicotinic receptors, was found to decrease under alkaline condition and in the presence of $\alpha-amylase$.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.327-334
• /
• 2018

The nano/micro composites with highly porous surface area have attracted of great interest, particularly the synthesis of porous and thin film sheets of high performance. In this paper, an easy method of cost-effective synthesis of thin film ceramic fiber membranes based on Hydroxyapatite, and activated carbon by turned into studied to be applied within the service-facilitated the transport of radioactive waste such as $^{90}Sr$, $^{137}Cs$ and $^{60}Co$) as activated product of radioisotopes from ETRR-2 research reactor and dissolved in 3M $HNO_3$, across a thin flat-sheet supported liquid membrane (TFSSLM). Radionuclides are transported from alkaline pH values. The presence of sodium salts in the aqueous media improves in $HNO_3$, the lowering of permeability because the initial $HNO_3$ concentration is improved. The study some parameters on the thin sheet ceramic supported liquid membrane. EDTA as stripping phase concentration, time of extraction and temperature were studied. The study of maximum permeability of radioisotopes for all parameters. The pertraction of a radioactive waste solution from nitrate medium were examined at the optimized conditions. Under the optimum experimental 98.6-99.9% of $^{90}Sr$, 79.65-80.3% of $^{137}Cs$ and $^{60}Co$ 45.5-55.5% in 90-110 min with were extracted in 10-30 min, respectively. The process of diffusion in liquid membranes is governed by the chemical diffusion process.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.411-417
• /
• 1999

The interfacial chemical behavior, lattice exchange and dissolution, of $FeS_{(S)}$ as one of the important sulfide minerals was studied. Emphases were made on the surface characterization of hydrous $FeS_{(S)}$, the lattice exchange of Cu(II) and $FeS_{(S)}$, and its effect on the dissolution of $FeS_{(S)}$, and also affect some organic ligands on that of both Cu(II) and $FeS_{(S)}$. Cu(II) which has lower sulfide solubility in water than $FeS_{(S)}$ undergoes the lattice exchange reaction when Cu(II) ion contacts $FeS_{(S)}$ in the aqueous phase. For heavy metals which have higher sulfide solubilities in water than $FeS_{(S)}$, these metal ions were adsorbed on the surface of $FeS_{(S)}$. Such a reaction was interpreted by the solid solution formation theory. Phthalic acid(a weak chelate agent) and EDTA(a strong chelate agent) were used to demonstrate the effect of organic lignads on the lattice exchange reaction between Cu(II) and $FeS_{(S)}$. The $pH_{zpc}$ of $FeS_{(S)}$ is 7 and the effect of ionic strength is not showed. It can be expected that phthalic acid has little effect on the lattice exchange reaction between Cu(II) and $FeS_{(S)}$. whereas EDTA has very decreased the removal of Cu(II) and $FeS_{(S)}$. This study shows that stability of sulfide sediments was predicted by its solubility. The pH control of the alkaline-neutralization process to treat heavy metal in wastewater treatment process did not needed. Thereby, it was regarded as an optimal process which could apply to examine a long term stability of marshland closely in the treatment of heavy metal in wastewater released from a disussed mine.

• 공업화학
• /
• 제29권2호
• /
• pp.168-175
• /
• 2018

본 논문에서는 대나무 섬유(BF)의 화학처리가 BF 및 폴리프로필렌(PP)/대나무섬유(BF) 복합체의 물성에 미치는 영향을 고찰하기 위해, 알칼리 처리 전후의 BF에 대해 ${\gamma}$-aminopropyltriethoxysilane (APS), ${\gamma}$-glycidoxypropyl-trimethoxysilane (GPS) 그리고 ${\gamma}$-mercaptopropyltrimethoxysilane (MRPS)을 이용하여 실란 상용화제를 처리하였다. BF의 화학처리에 따른 형태학적 특성은 광학현미경(OM)과 주사전자현미경(SEM)을 통해 확인하였으며, 화학 구조의 변화는 FT-IR과 EDS를 통해 확인하였다. 실란처리 시 BF의 열안정성이 증가함을 TGA를 통해 확인하였다. 실란 처리한 PP/BF 복합체의 굴곡강도와 충격특성이 개선되는 것을 만능시험기(UTM)와 충격강도시험기(Izod impact test)를 통해 확인하였고, PP/BF 계면 접착특성이 개선되는 것을 인장시험 후 시편의 파단면을 SEM 사진을 통해 확인하였다.

• 자원리싸이클링
• /
• 제31권2호
• /
• pp.40-48
• /
• 2022

본 연구에서는 바나듐광 염배소-수침출 과정을 거쳐 얻어지는 바나듐 함유 수용액으로부터 바나듐을 암모늄메타바나데이트로 침전시켜 회수할 때, 수용액에 존재하는 다른 성분의 이온들이 바나듐 회수에 미치는 영향을 알아보았다. 바나듐 함유 수용액은 pH가 13 정도인 강알칼리 용액으로서, 암모늄메타바나데이트 침전효율을 높이기 위해서는 수용액 pH를 9 이하로 낮춰야 한다. 그러나 황산으로 수용액 pH를 조절하는 과정에서 알루미늄 이온은 바나듐과 같이 공침되기 때문에 알루미늄 이온을 먼저 제거시켜야 한다. 본 연구에서는 소듐실리케이트를 사용하여 알루미늄-실리케이트 화합물 형태로 침전시킴으로서 알루미늄을 제거하였으며, 이 과정에서 바나듐 손실을 최소화하는 조건에 대하여 알아보았다. 알루미늄 제거 후, 황산을 이용하여 수용액 pH를 9 이하로 조절하는 과정에서 수용액의 실리케이트 성분을 침전시켜 제거하였다. 이 때 황산의 농도와 첨가속도가 바나듐 손실에 큰 영향을 미치며, 가급적 25% 묽은 황산을 사용하여 천천히 첨가함으로서 바나듐 손실을 최소화 하였다. 알루미늄 제거 그리고 수용액 pH 조절 과정을 통하여 얻은 바나듐 수용액에 3 당량의 염화암모늄을 첨가하여 상온에서 침전시킨 결과, 전체적으로 81% 이상의 바나듐을 암모늄메타바나데이트로 회수할 수 있었다. 회수된 암모늄메타바나데이트를 세척한 후 550℃에서 2시간 열처리하여 98.6% 순도의 오산화바나듐을 얻을 수 있었다