• 한국염색가공학회지
• /
• 제17권4호
• /
• pp.41-47
• /
• 2005

Costume heritages of an excavated silk fabrics should be preserved without damage. In order to artificially restore the excavated silk fabrics, alkaline aqueous solution, as a simulated corpse, and two kinds of silk fabrics were used. Two kinds of silk fabrics were treated by aqueous alkaline solution according to strength retention value(100, 80, 60, 40, 20$\%$). The fine structure and physical properties of alkaline treated silk fabrics were investigated with various techniques such as wide-angle X-ray diffraction, tensile test, weight loss, shrinkage, SEM. and yellowness. As the alkaline treatment time increased tensile strength of silk fabrics decreased. However, weight loss and shrinkage slightly increased. The diffraction intensity of $\beta-form$ crystal declined and $\alpha-form$ crystal diffraction intensity disappeared with the treatment.

• 패션비즈니스
• /
• 제12권3호
• /
• pp.54-61
• /
• 2008

The glitter of lame fabrics containing the metallic yarns may further be altered by $Na_2CO_3$ aqueous solution at an elevated temperature. In this study, the effect of the corrosion treatment on the yarn luster was evaluated using image analysis. The alkaline solution treatment was found to be more effective on the aluminum-based specimens than on the silver-based specimens. It was found that corrosion percentage measurement based on the transmission analysis may provide reasonable quantitative index, even if the measurement relies on an indirect method. Based on the quantitative results, the alkaline treatment condition for the specific specimen would be optimized for a desired glitter modification.

• 한국의류학회지
• /
• 제16권3호
• /
• pp.335-344
• /
• 1992

This study was conducted to investigate the influence of addition of cetyl trimethyl ammo­nium bromide (CTAB), and amine [ethylamine (EA) or ethylene diamine (EDA)] to aqueous sodium hydroxide (NaOH) solution on polyester alkaline hydrolysis, The experimental vari­ables such as CTAB concentration, EA or EDA concentration, NaOH concentration, tempera­ture and time were compared, and the changes in physical and chemical properties of alkaline­hydrolyzed PET fabrics depending on their treated conditions were measured, The results are as follows: 1. By adding CTAB and amine in aqueous NaOH solution, increasing effect on weight loss of PET fabrics was obtained in simultaneous addition of CTAB and EDA, but not in CTAB and EA. 2. By adding CTAB & EDA simultaneously, increasing effect on weight loss was obtained regardless of EDA concentration, time and temperature, and it was more effective at lower NaOH concentration. :l. The increase of void space (or irregularly grooved surface), of softness, of wickability, of dyeability on PET fabric, and the decrease of tensile strength, of molecular weight were observed according to the weight loss on the PET fabrics. These changes were equal to all alkaline-hydrolyzed PET fabrics regardless of addition of CTAB and amine. l. There was little changes on crystallinity, thermal behavior when PET fiber was treated with ,aqueous NaOH solution with CTAB and EDA. These results supported that increasing effect on weight loss take place without inducing of fine structural change of PET fibers.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.141-141
• /
• 2018

Copper is one of the most abundant metals on earth. Its oxide (CuO) is an intrinsically p-type metal-oxide semiconductor with a bandgap ($E_g$) of 1.2-2.0 eV 1. Copper oxide nanomaterials are considered as promising materials for a wide range of applications e.g., lithium ion batteries, dye-sensitized solar cells, photocatalytic hydrogen production, photodetectors, and biogas sensors 2-7. Recently, high-density and uniform CuO nanostructures have been grown on Cu foils in alkaline solutions 3. In 2011, T. Soejima et al. proposed a facile process for the oxidation synthesis of CuO nanobelt arrays using $NH_3-H_2O_2$ aqueous solution 8. In 2017, G. Kaur et al. synthesized CuO nanostructures by treating Cu foils in $NH_4OH$ at room temperature for different treatment times 9. The surface treatment of Cu in alkaline aqueous solutions is a potential method for the mass fabrication of CuO nanostructures with high uniformity and density. It is interesting to compare the gas sensing properties among CuO nanomaterials synthesized by this approach and by others. Nevertheless, none of above studies investigated the gas sensing properties of as-synthesized CuO nanomaterials. In this study, CuO nanowalls versus nanoparticles were synthesized via the oxidation process of Cu foil in NH4OH solution at $50-70^{\circ}C$. The gas sensing properties of the as-prepared CuO nanoplates were examined with $C_2H_5OH$, $CH_3COCH_3$, and $NH_3$ at $200-360^{\circ}C$.

• 한국지반환경공학회 논문집
• /
• 제13권9호
• /
• pp.69-74
• /
• 2012

본 연구에서는 염기성 수산화이온을 이용한 TNT의 분해 특성을 조사하였다. 이를 위해 TNT 처리 시 분광학적인 변화 특성을 관찰하고, pH 영향 및 반응생성물에 대해 정량적으로 조사하였다. 실험결과, pH=12에서 가수분해에 의해 TNT 수용액이 갈색을 띄는 파장 400-600nm 범위 내에서 흡광도가 증가함을 관찰하였다. 수용액 상의 pH=12에서 TNT 가수분해 시 pseudofirst-order 속도상수는 $0.0022min^{-1}$으로 나타났으며, 그 반응속도는 매우 느린 것으로 초기 TNT 농도인 $44{\mu}M$이 약 90% 정도 분해되려면 약 1,047min(17.44hrs)이 소요될 것으로 예상되었다. 반응 생성물로는 아질산이온과 포름산이 주로 생성되며, 기타 미량 성분으로 질산이온, 옥살산 등이 확인되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.275-275
• /
• 2013

Osteoblast is one of cells related with osseointegration and many research have conducted the adhesion of osteoblast onto the surface of implant. In the osseointegration, biocompatibility of the implant and cell adhesion to the surface are important factors. The researches related to cell adhesion have a direction from micro-scaled surface roughness to nano-scaled surface roughness with advancing nanotechnology. A cell reacts and sense to stimuli from extracellular matrix (ECM) and topography of the ECM [1]. Thus, for better osseointegration, we should provide an environment similar to ECM. In this study, we synthesize TiO2 nanowires using hydrothermal reaction because TiO2 provides inertness to titanium on its surface and enables it used as an implant material for the orthopedic treatment such as fixation of the bone fracture [2]. Ti substrate is immersed into NaOH aqueous solution. The solution are heated at $140{\sim}200^{\circ}C$ for various time (10~720 minutes). After heat treatment, we take out the sample and immerse it into HCl aqueous solution for 1 hour. The acid treated sample is heated again at $500^{\circ}C$ for 3 hours [3]. Then, we culture osteoblast on the TiO2 nanowires. For investigating cell adhesion onto nanostructured surface, we conduct several tests such as MTT assay, ALP (Alkaline phosphatase) activity assay, measuring calcium expression, and so on. These preliminary results of the cell culture on the nanowires are foundation for investigating cell-material interaction especially with nanostructure interaction.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.487-494
• /
• 2005

자동차, 기계금속, 전자 등 여러 산업에서는 부품 가공 중의 세정 과정에서 금속가공유와 각종 세정첨가물이 함유된 많은 폐수를 발생시킨다. 본 연구에서는 수용성 또는 비수용성 금속가공유로 오염된 수계 및 준수계 세정폐수를 한외여과막시스템을 이용하여 처리하고자 하였다. 이 실험에서 막을 친수성인 polyacrylonitrile(PAN)을 사용하고 막의 크기 및 오염물의 농도 변화에 따른 한외여과막 투과수량과 유수분리 성능(COD제거율)을 측정하여 한외여과법 처리의 적정성 여부를 조사 분석하였다. 그 결과 수계 또는 준수계세정제와 수용성 가공유로 오염된 가공폐수의 경우 한외여과막의 크기가 10 kDa에서 100 kDa로 증가함에 따라 COD 제거율은 90 wt％-95 wt％로 거의 일정하지만 투과플럭스는 4배 이상 증가하였다. 그리고 금속가공폐수의 오염물 농도가 3 wt％에서 10 wt％로 증가할수록 한외여과막의 COD 제거율은 증가하지만 투과플럭스는 감소하였다. 그러나 수계 또는 준수계세정제와 비수용성 오일로 오염된 가공폐수의 경우 오염물의 농도가 증가할수록 COD 제거율은 거의 일정하지만 투과플럭스는 급격히 감소함을 보여 주었다. 이러한 현상은 한외여과막 재질이 친수성인 PAN이기 때문에 비수용성 오일이 막을 통과하지 못하고 막의 기공을 막기 때문인 것으로 추론된다. 따라서, 수용성 오일이 함유된 세정액은 막재질이 PAN이고 세공크기가 100 kDa인 한외여과법 처리가 적정한 것으로 판단되었다. 이러한 기초실험 결과를 활용하여 PAN 재질의 막(MWCO=100 kDa)을 사용한 한외여과 pilot 시스템을 설치 운전하여 수용성 인발유로 오염된 알칼리 세정 폐액을 처리하고 알칼리세정제와 인발유를 재활용하고자 하였다. 현장 실험 결과 한외여과 공정은 수계세정제와 수용성오일을 효과적으로 분리하여 재활용할 수 있었고 기존 공정에 비하여 세정제 사용수명을 12배 이상 증가시킬 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.213-226
• /
• 2022

In the present study, the corrosion behavior of aluminum Al-7075 tempered (T-6 condition) alloy was evaluated by immersion testing and electrochemical testing in 1.75% and 3.5% NaCl environment at acidic, neutral and basic pH. The data obtained by both immersion tests and electrochemical corrosion tests (potentiodynamic polarization and electrochemical impedance spectroscopy tests) present that the corrosion rate of the alloy specimens is minimum for the pH=7 condition of the solution due to the formation of dense and well adherent thin protective oxide layer. Whereas the solutions with acidic and alkaline pH cause shift in the corrosion behavior of aluminum alloy to more active domains aggravated by the constant flux of acidic and alkaline ions (Cl^- and OH^-) in the media which anodically dissolve the Al matrix in comparison to precipitated intermetallic phases (cathodic in nature) formed due to T6 treatment. Consequently, the pitting behavior of the alloy, as observed by cyclic polarization tests, shifts to more active regions when pH of the solutions changes from neutral to alkaline environment due to localized dissolution of the matrix in alkaline environment that ingress by diffusion through the pores in the oxide film. Microscopic analysis also strengthens the results obtained by immersion corrosion testing and electrochemical corrosion testing as the study examines the corrosion behavior of this alloy under a systematic evaluation in marine environment.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.556-561
• /
• 2017

Serving as an excellent adsorbent and inorganic ion exchanger in the water purification field, zeolite 4A has in this work presented a strong capability for purifying radioactive waste, such as $Sr^{2+}$, $Cs^+$, and $Co^{2+}$ in water. During the processes of decontamination and decommissioning of suspended solids and organics in low-level radioactive wastewater, the purification performance of zeolite 4A has been studied. Under ambient temperature and neutral condition, zeolite 4A absorbed simulated radionuclides such as $Sr^{2+}$, $Cs^+$, and $Co^{2+}$ with an absorption rate of almost 90%. Additionally, in alkaline condition, the adsorption percentage even approached 98.7%. After conducting research on suspended solids and organics of zeolite 4A for the treatment of radionuclides, it was found that the suspended clay was conducive to absorption, whereas the absorption of organics in solution was determined by the species of radionuclides and organics. Therefore, zeolite 4A has considerable potential in the treatment of radioactive wastewater.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권3호
• /
• pp.87-95
• /
• 2020

EIS를 이용한 아크 금속용사 표면처리기법이 적용된 강재의 콘크리트 내 부식거동에 관한 실험적 연구로서 콘크리트 내부환경을 모사한 Ca(OH)₂ 포화수용액 침지 및, NaCl 수용액에서의 침지실험을 통해 부식거동을 실험하였다. Nyquist plot의 분석을 통하여 등가회로를 도출하였으며 Ca(OH)₂ 수용액에서의 계면저항과 분극저항을 비교한 결과 계면저항은 Al ATMS가 가장 우수하였으며 분극저항은 Zn ATMS가 가장 우수한 것으로 나타났다. 시멘트 모르타르에 금속용사 표면처리 된 강재를 매립후 NaCl 수용액에 침지하여 침지 시간에 따른 임피던스 측정에서는 초기 침지 임피던스 측정값은 Zn ATMS시험체가 가장 높았으나 침지 2주후에는 Al ATMS 시험체의 임피던스가 가장 높고 안정적으로 나타났다. 이는 이온화 경향이 높은 Al이 강알칼리 환경에서 지속적으로 산화하며 피막을 형성하였으며, 염소 이온의 침투로부터 강재를 보호하기 때문으로 판단된다.