• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.138-145
• /
• 2015

A series of wholly aromatic poly(hydroxyamide)s(PHAs), containing varying amounts of 2,6-dimethylphenoxy group and quinoxaline ring in the main chain, were synthesized by a direct polycondensation method. The inherent viscosities of the PHAs in either DMAc or DMAc/LiCl solution at $35^{\circ}C$ were found to be in the range of 1.02~1.90 dL/g. In the solubility study, we observed that PHA 1, PHA 2, and PHA 3 were dissolved in aprotic solvents such as DMAc, NMP, DMF, and DMSO with LiCl on heating; however, PHA 4, PHA 5, and PHA 6 could be dissolved in aprotic solvents on heating without LiCl. For poly(benzoxazole)s(PBOs), the 10% and maximum weight loss temperatures were in the range of $582{\sim}622^{\circ}C$ and $630{\sim}659^{\circ}C$, respectively. Residues of PBOs at $900^{\circ}C$ were found to be relatively high, which were in the range of 65.3~70.8%.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.9
• /
• pp.1346-1350
• /
• 2004

Pseudo-first order rate constants $(k_{obs})$ are reported for the following solvolyses in approximately isodielectric mixtures: 3- and 4-methoxybenzyl chloride, bromo- and chlorodiphenylmethane, and 4-chloro-, 4,4'-dichloro and 4-methyl-chlorodiphenylmethane in 0-80% v/v nitromethane-methanol mixtures; and bromo- and chlorodiphenylmethane and 4-methyl-chlorodiphenylmethane in various acetonitrile-methanol mixtures (in the range 0-50% v/v) at$25^{\circ}C.$ These data, and literature data for t-butyl halides (Cl, Br, and I), and for p-methoxybenzoyl chloride, show rate maxima in solvent compositions of ca. 30% aprotic cosolvent, explained by a stoichiometric solvent effect on electrophilic solvation. Linear relationships are observed between $(k_{obs})/[MeOH]^2$ and [AP]/[MeOH], where [AP] refers to the molar concentration of aprotic cosolvent. The results are consistent with competing third order contributions to $k_{obs}$, $k_{MM}[MeOH]^2$ with hydrogen-bonded methanol as electrophile, and $k_{MAP}[MeOH][AP]$ with hydrogen-bonding disrupted by the aprotic solvent.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.532-540
• /
• 2021

Sodium dodecanoyl-4-oxybenzenesulfonate (DOBS) salt is a substance that exhibits effective bleaching and antimicrobial abilities at low temperatures. A mild and efficient synthesis method of DOBS starting from dodecanoyl chloride and sodium 4-hydroxybenzene sulfonate was investigated under alkaline conditions using a water (W)-polar aprotic solvent system. First, the reaction was carried out using only water as a solvent system with the variables of temperature and time. The yield was found to be as low as about 5% in most cases under the reaction conditions of more than 30 ℃ and 1 h. In order to develop an efficient solvent system, the effect on the yield of DOBS was evaluated in various solvent systems which were prepared by changing the type of polar aprotic solvents while mixing them with the water. A solvent system in which acetone (AC) and water were mixed showed the best yield and about 82 % under mild reaction conditions (30 ℃, 1 h and atmospheric pressure) was obtained. The prepared DOBS showed good bleaching and antimicrobial activities indicating that it could be used an excellent bleach activator.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.55-57
• /
• 1983

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.649-654
• /
• 1995

The reactivity of superoxide ion($O{_2}^{-.}$) with halogenated substrates is investigated by cyclic voltammetry and rotated ring-disk electrode method in aprotic solvents. The more positive the reduction potential of the substituted nitrile, the more facile is nucleophilic displacement by $O{_2}^{-.}$. The reaction rates of halogenonitriles with $O{_2}^{-.}$ vary according to the leaving-group propensity of halide (Br>Cl>F). The relative reaction rates of other substituted nitriles are in the order of electron-withdrawing propensity of the substituent group (CN> $C(O)NH_2$ >Ph, $CH_2CN$). The reaction of $O{_2}^{-.}$ with dihalocarbons indicates that five-membered rings can be rapidly formed by the cyclization of substrate and $O{_2}^{-.}$, and the relative rates of cyclization depend on the number of methylenic carbons {$Br(CH_2)_nBr$, [n=1<2<3>4>5]}. Mechanisms are proposed for the reaction of $O{_2}^{-.}$ with halogenated substrates.

• Archives of Pharmacal Research
• /
• v.18 no.6
• /
• pp.454-457
• /
• 1995

To improve the yield of genuine aglycones from glycosides, the conditions of alkaline hydrolysis were investigated, and a modified method was established. The modified method empolyed pyridine as an aprotic solvent. To complete the hydrolysis and obtain 20(S)-protopanaxadiol (1) and 20(S)-protopanaxatriol(2), which are the genuine aglycones of ginsenosides, total ginsenosides were refluxed with sodium methoxide in pyridine. Addition of methanol, a protic polar solvent to the reaction miuxture, led partial hydrolysis yielding a mixture of the genuine prosapogenols. Of the prosapogenols compound 3 and 6 characteristically possessed D-glucopyranosyl moiety attached at the sterically hindered C-20 hydroxyl group. 3 and 6 were not obtaijned by other hydrolysisw methods except by the soil bacterial hydrolysis.

• Carbon letters
• /
• v.23
• /
• pp.55-62
• /
• 2017

We report on the dispersion state of partially reduced graphene oxide (PRGO) in organic solvents, namely methyl ethyl ketone, ethyl acetate, methylene chloride, toluene, and xylene, by controlling the carbon to oxygen (C/O) atomic ratio of the PRGOs. A two-phase solvent exchange method is also proposed to transfer PRGO from water to an aprotic solvent, such as methyl ethyl ketone. We achieve relatively good dispersion in aprotic and non-polar solvents by controlling the C/O atomic ratio of the PRGOs and applying the two-phase solvent exchange method. There is an increase in the glass transition temperatures with the dispersion of PRGOs into amorphous polymers, in particular a $4.4^{\circ}C$ increase for poly(methyl methacrylate) and $3.0^{\circ}C$ increase for polycarbonate. Good dispersion of PRGO in a nonpolar polymer, such as linear low density polyethylene, is also obtained.

• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.205-214
• /
• 2020

A series of wholly aromatic polyhyroxyamide (PHA) copolymers were prepared by direct polycondensation reaction of isophthalic acid and diacids containing bulky units with 3,3'-dihydroxybenzidine. The inherent viscosities of the PHAs measured at 35℃ in DMAc solution were in the range of 0.31-0.56 dL/g. The solubility study revealed that the PHAs were readily soluble in aprotic solvents such as, dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), and N-methyl-2-pyrrolidone (NMP) at room temperature and in less polar solvent such as pyridine. However, the polybenzoxazole (PBO) copoymers were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid and partially soluble in NMP containing LiCl. The PBO copolymers showed maximum weight loss temperature in the range of 593-632℃ and high char yields in the range of 65.0-71.2% at 900℃ in a nitrogen atmosphere.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.980-985
• /
• 1998

The excited-state intramolecular proton transfer (ESIPT) emission has been observed for 0.01 mM p-aminosalicylic acid (AS) in nonpolar aprotic solvents as demonstrated by the large Stokes' shifted fluorescence emission around 440 nm in addition to the normal emission at 330 nm. However in aprotic polar solvent such as acetonitrile, the large Stokes' shifted emission band becomes broadened, indicating existence of another emission band originated from intramolecular charge transfer (ICT). It is noteworthy that in protic solvents such as methanol and ethanol the normal and ICT emissions are quenched as the AS concentration decreases, followed by the appearance of new emission at 380 nm. These results are interpreted in terms of ESIPT coupled charge transfer in AS. Being consistent with these steady-state spectroscopic results, the picosecond time-resolved fluorescence study unravelled the decay dynamics of the ESIPT and ICT state ca. 300 ps and ca. 150 ps, respectively with ca. 40 ps for the relaxation time to form the ICT state.