• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.198-203
• /
• 1998

To acquire the high precision of profile for standard electrode of loss angle, it is needed ultraprecision machining technology like MEAP(Magnetic Electronic Abrasive Polishing) and the very high profile measurement technology which can measure a micro unit about the workpiece. So, in this paper, it was developed the measurement system of precision of profile using non-contactable sensor that was approximate sensor of capacitance type, because that is better than others in the electrical characteristics. And standard electrode of loss angle was machined by the MEAP machining technology. In this study, it was development of precision measurement system. This system could be used measure the workpiece of roundness and straightness much more precise and faster than general mechanical measurement system done before. And it could be helped to minimize machining time and planning by very fast and precise measurement about the workpiece.

• 한국전자통신학회논문지
• /
• 제14권4호
• /
• pp.679-684
• /
• 2019

CAFFE 모델을 이용하여 클래스의 특정 종의 수량 측정하는 방법과 스테레오 비전을 이용하여 물체의 길이와 너비를 측정하는 방법을 제안한다. 물체의 너비를 구하는 방법은 좌측 센서와 우측 센서의 대상의 좌표 값을 비교하여 센서부터 물체까지의 거리를 계산한다. 그 후 거리와 영상 속의 대상의 길이를 구해 물체의 실제 길이의 근사 값을 계산한다.

• Journal of Communications and Networks
• /
• 제18권5호
• /
• pp.846-856
• /
• 2016

Wireless sensor networks (WSNs) are widely applied in monitoring and control of environment parameters. It is sometimes necessary to disseminate data through wireless links after they are deployed in order to adjust configuration parameters of sensors or distribute management commands and queries to sensors. Several approaches have been proposed recently for data dissemination in WSNs. However, none of these approaches achieves both high efficiency and low complexity simultaneously. To address this problem, cluster-tree based network architecture, which divides a WSN into hierarchies and clusters is proposed. Upon this architecture, data is delivered from base station to all sensors in clusters hierarchy by hierarchy. In each cluster, father broadcasts data to all his children with instantly decodable network coding (IDNC), and a novel scheme targeting to maximize total transmission gain (MTTG) is proposed. This scheme employs a new packet scheduling algorithm to select IDNC packets, which uses weight status feedback matrix (WSFM) directly. Analysis and simulation results indicate that the transmission efficiency approximate to the best existing approach maximum weight clique, but with much lower computational overhead. Hence, the energy efficiency achieves both in data transmission and processing.

• Journal of Biosystems Engineering
• /
• 제33권5호
• /
• pp.355-361
• /
• 2008

As agricultural machinery has become larger and tillage practices have changed in recent decades, compaction as a result of wheel traffic and tillage has caused increasing concern. If strategies to manage compaction, such as deep tillage, could be applied only where needed, economic and environmental benefits would result. For such site-specific compaction management to occur, compacted areas within fields must be efficiently sensed and mapped. We previously developed an on-the-go soil strength profile sensor (SSPS) for this purpose. The SSPS measures within-field variability in soil strength at five soil depths up to 50 cm. Determining the variability structure of SSPS data is needed for site-specific field management since the variability structure determines the required intensity of data collection and is related to the delineation of compaction management zones. In this paper, soil bin data were analyzed by a spectral analysis technique to determine the variability structure of the SSPS data, and to investigate causes and implications of this variability. In the soil bin, we observed a repeating pattern due to soil fracture with an approximate 12- to 19-cm period, especially at the 10-cm depth, possibly due to cyclic development of soil fracture on this interval. These findings will facilitate interpretation of soil strength data and enhance application of the SSPS.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.369-378
• /
• 2013

This paper presents a vision/LiDAR integrated navigation system that provides accurate relative navigation performance on a general ground surface, in GNSS-denied environments. The considered ground surface during flight is approximated as a piecewise continuous model, with flat and slope surface profiles. In its implementation, the presented system consists of a strapdown IMU, and an aided sensor block, consisting of a vision sensor and a LiDAR on a stabilized gimbal platform. Thus, two-dimensional optical flow vectors from the vision sensor, and range information from LiDAR to ground are used to overcome the performance limit of the tactical grade inertial navigation solution without GNSS signal. In filter realization, the INS error model is employed, with measurement vectors containing two-dimensional velocity errors, and one differenced altitude in the navigation frame. In computing the altitude difference, the ground slope angle is estimated in a novel way, through two bisectional LiDAR signals, with a practical assumption representing a general ground profile. Finally, the overall integrated system is implemented, based on the extended Kalman filter framework, and the performance is demonstrated through a simulation study, with an aircraft flight trajectory scenario.

• 마이크로전자및패키징학회지
• /
• 제14권1호
• /
• pp.19-26
• /
• 2007

본 연구의 목적은 CMOS 이미지 센서용 Au 플립칩 범프와 전해 도금된 Au 기판 사이의 초음파 접합의 가능성 연구이다. 초음파 접합 조건을 최적화하기 위해서, 대기압 플라즈마 세정 후 접합 압력과 시간을 달리하여 초음파 접합 후 전단 시험을 실시하였다. 범프의 접합 강도는 접합 압력과 시간 변수에 크게 좌우되었다. Au 플립칩 범프는 상온에서 성공적으로 하부 Au 도금 기판과 접합되었으며, 최적 조건 하에서 접합 강도는 약 73 MPa이었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2299-2318
• /
• 2019

Location-aware networks are of great importance for both civil lives and military applications. Methods based on line-of-sight (LOS) measurements suffer sever performance loss in harsh environments such as indoor scenarios, where sensors can receive both LOS and non-line-of-sight (NLOS) measurements. In this paper, we propose a data association (DA) process based on the expectation maximization (EM) algorithm, which enables us to exploit multipath components (MPCs). By setting the mapping relationship between the measurements and scatters as a latent variable, coefficients of the Gaussian mixture model are estimated. Moreover, considering the misalignment of sensor position, we propose a space-alternating generalized expectation maximization (SAGE)-based algorithms to jointly update the target localization and sensor position information. A two dimensional (2-D) circularly symmetric Gaussian distribution is employed to approximate the probability density function of the sensor's position uncertainty via the minimization of the Kullback-Leibler divergence (KLD), which enables us to calculate the expectation step with low computational complexity. Moreover, a distributed implementation is derived based on the average consensus method to improve the scalability of the proposed algorithm. Simulation results demonstrate that the proposed centralized and distributed algorithms can perform close to the Monte Carlo-based method with much lower communication overhead and computational complexity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2414-2434
• /
• 2015

Among numerous localization schemes proposed specifically for Wireless Sensor Network (WSN), the range-free localization algorithms based on the received signal strength indication (RSSI) have attracted considerable research interest for their simplicity and low cost. As a typical range-free algorithm, Approximate Point In Triangulation test (APIT) suffers from significant estimation errors due to its theoretical defects and RSSI inaccuracy. To address these problems, a novel localization method called FIAPIT, which is a combination of an improved APIT (IAPIT) and a fuzzy logic system, is proposed. The proposed IAPIT addresses the theoretical defects of APIT in near (it's defined as a point adjacent to a sensor is closer to three vertexes of a triangle area where the sensor resides simultaneously) and far (the opposite case of the near case) cases partly. To compensate for negative effects of RSSI inaccuracy, a fuzzy system, whose logic inference is based on IAPIT, is applied. Finally, the sensor's coordinates are estimated as the weighted average of centers of gravity (COGs) of triangles' intersection areas. Each COG has a different weight inferred by FIAPIT. Numerical simulations were performed to compare four algorithms with varying system parameters. The results show that IAPIT corrects the defects of APIT when adjacent nodes are enough, and FIAPIT is better than others when RSSI is inaccuracy.

• 수산해양기술연구
• /
• 제49권1호
• /
• pp.58-66
• /
• 2013

Most of steam power plant in Korea are heating the feed water system to prevent freezing water flowing in the pipe in winter time. The heating system is operated whenever the ambient temperature around the power plant area below 5 degree Centigrade. But this kind of heat supplying system cause a lot of energy consuming. If we think about the method that the temperature of the each pipe is controled by attaching the temperature measuring sensor like RTD sensor and heat is supplied only when the outer surface temperature of the pipe is under 5 degree Centigrade, then we can save a plenty of energy. In this study, the computer program package for simulation is used to compare the energy consumption load of both systems. Energy saving rate is calculated for the location of Youngweol area using the data of weather station in winter season, especially the January' severe weather data is analyzed for comparison. Various convection heat transfer coefficients for the ambient air and the flowing water inside the pipe was used for the accurate calculation. And also the various initial flowing water temperature was used for the system. Steady state analysis is done previously to approximate the result before the simulation. The result shows that the temperature control system using RTD sensor represents the high energy saving effect which is more than 90% of energy saving rate. Even in the severe January weather condition, the energy saving rate is almost 60%.

• 한국통신학회논문지
• /
• 제39B권9호
• /
• pp.614-619
• /
• 2014

WSN (Wireless Sensor Networks)기반 보안 감시 시스템에서는 센서들이 수집한 이벤트 발생 정보를 전송함에 있어서 이벤트가 발생한 지역의 위치 정보를 함께 제공하는 것이 요구된다. 기존에 많은 연구가 진행되었던 2D기반 위치추적 기법들은 고도가 일정한 환경에서는 꽤 높은 정확도를 보이나, 높이 개념이 추가된 실제 환경에서는 많은 오류를 발생시킬 수 있다. 또한 기존의 3D 위치추적 기법들은 많은 참조노드를 요구하거나, 복잡한 수식 계산을 요구하는 문제점을 가지고 있다. 그러나 본 논문에서 고려하는 실내 보안 감시 시스템에서는 감지된 대상체가 침입자인지 여부를 판단하기 위한 대상체의 높이 예측만을 요구한다. 따라서 본 논문에서는 복잡한 수식 계산이나 많은 참조노드들을 요구하지 않는 대상체 높이예측 기법을 제안한다. 또한 제안 기법의 성능분석을 위하여 여러 가지 시나리오에서 예측 정확도를 측정하였다.