Successful project planning relies on a good estimation of the manpower required to complete a project. The good estimation can be derived from Rutnam's Rayleigh Model or Phillai et al.'s Gamma Model. These models only can be applied for the projects which the need of manpower is increased exponentially and the highest of manpower is required at the end of development phase. However, in a practical project, most manpower is required during development phase and a small amount of manpower is assigned during maintenance phase. In addition, the Waterfall Model and Unified Process only can be adopted for development phase. So the current development environments cannot be adopted into the existing manpower distribution models which the highest manpower is required at the end of development phase. This paper suggests an appropriate model for development phase to solve this problem. First, the appropriate manpower distribution for development phase of the Waterfall model was derived from Putnam's manpower distribution and then manpower distribution of development phase was derived for Unified Process. After comparing the required manpower of two Processes, total manpower distribution is similar each other even though the required manpower and task is different for each point of development phase. From this result, a unified model is derived and it can be applied for both development processes.
Successful project planning relies on a good estimation of the manpower required to complete a project in addition to the schedule options that may be available. Existing software manpower estimation models present the total manpower and instantaneous manpower distribution for the software life cycle. Putnam's Rayleigh and Phillai et al.'s Gamma models present a model with assumption that the manpower is needed at the system delivery. This means that 40 percent of total manpower is applied at the software development, and the other 60% is applied during maintenance phase. However Warburton observes the manpower is needed during development phase with the peak at the completion of the software design phase. So, the existing models were not appropriate to be applied to practical projects. This paper suggests the Sigmoid model which does not consider the point of manpower peak to fix the problem above. The suggested model showed some improvement when practical data was applied. Therefore, the Sigmoid model can be used as alternative of Rayleigh and Gamma model to estimate distribution of manpower during software development phas.
Choi, Se Mook;Yang, Byoung Seon;Kim, Yoon Sik;Lim, Yong;Oh, Yeon Suk;Bae, Do Hee;Choi, Byong Ho
Korean Journal of Clinical Laboratory Science
/
v.51
no.4
/
pp.495-503
/
2019
This study explored the method of determining the appropriate size of the workforce according to the assessment of the workload of medical technologists (also called medical and clinical laboratory technologists, and medical and clinical laboratory scientists) in order to present a standard production model for the appropriate manpower in blood collection rooms. The eleven university hospitals selected for this study had between 600 and 2,000 beds. The 14-steps standard blood collection time was 4 minutes and 8 seconds for the outpatients aged between 20 to 60 years old (57%) except for children and the elderly (43%). Assuming that there were 8 hours per day for mechanically collecting blood, the maximum number of blood donations by one clinical laboratory scientist was analyzed to be 100 cases. In conclusion, it is appropriate to have fewer than 100 cases of daily blood collection by a medical technologist engaged in blood collection. Since the proper number of blood collection workers (100% of blood collection work)=the number of annual working days/(one day's work hours/time per case)×the number of working days per year, then the proper number of blood collection workers (one day's work hours)=the number of working days per year/100×the number of working days).
Yun Hwa Jung;Ye-Seul Jang;Hyunkyu Kim;Eun-Cheol Park;Sung-In Jang
Health Policy and Management
/
v.33
no.4
/
pp.457-478
/
2023
Background: This study aims to contribute to the adjustment of the appropriate doctor manpower by analyzing the distribution, supply and demand, and estimation of the doctor manpower. Methods: This study utilized the medical personnel data of the Ministry of Health and Welfare, population trend data of the National Statistical Office, and health insurance benefit performance data of the National Health Insurance Service. Based on 2021, we compared the number of doctors in actual supply and the number of doctors in demand according to the amount of medical use by gender and age for 250 regions. Logistic regression analysis and scenario analysis were performed to estimate the future medical workforce by considering the demand for doctors according to the future demographic structure, the size of the quota in medical schools, and the retirement rate. Results: There were 186 regions in which the supply of doctors was below average, and the average ratio of the number of doctors in supply to demand in the region was 62.1%. Conclusion: In order to increase the number of active doctors nationwide to at least 80%, 7,756 people must be allocated. The number of doctors in demand is estimated to decrease after increasing to 1.492 times in 2059. The future projected number of doctors is expected to increase to 1.349 times in 2050 and then decrease taking into account the doctor quota and the retirement rate.
Journal of the korean academy of Pediatric Dentistry
/
v.34
no.1
/
pp.43-52
/
2007
The supply and demand planning the pediatric dentists is earnest, because of the start of the dental specialist system on 2008 and aging society with low fertility. Therefore in order to develop the model, that is adequate to estimate demand for the pediatric dentists, a studies on the supply and demand planing of other health manpower were reviewed. The obtained results were as follows : 1. The health demand method was appropriate for demand estimation of the pediatric dentists. 2. There was independent variables needed for demand estimation model: prevalence, utilization rate, referral rate, fertility rate, productivity, annual working days, and so on. 3. Since statistical data for application of these variables was insufficient as result of searching, questionnaire researching and discussion of specialist may be necessary. 4. Each independent variables should be inducted into an equation by using a adequate regression model and then estimated.
Journal of the Korean Society of Marine Environment & Safety
/
v.29
no.7
/
pp.910-914
/
2023
With the technological innovation owing to the 4th industrial revolution, the maritime transportation is rapidly being developed with autonomous ships and systems. Particularly, autonomous ships will partially replace the manned ships and navigation among them remotely upon the degree of autonomy suggested by IMO. Accordingly, the remote operator and related research have increased as well. However, the data on the minimum required manpower for remote operators are lacking such as considering engage required situations and their co-occurrence probability. Therefore, this study proposes a simulation model that calculates the number of remote engage required situations by defining restricted water area and remote engage required situation as close-quarter situations based on accumulated trajectory data of actual ships. The findings are expected to be used as background materials to establish the appropriate manpower distribution of remote operators in remote operation centers.
1. Comparison of demand and supply A. Assumption of estimation of demand and supply we will briefly assumptions used for presumption once more before comparing the result of estimation of demand and supply examined previously 1) supply - The average applying rate for state. examination of graduate: ${\alpha}$=1.03109 - The ratio of successful applicants of state examinations: ${\beta}$=0.97091 - Mortality classified by age : presumed data of the Bureau of statistics - Emigrating rate: 0 % - Time of retire: unconsidered - An army doctor number: unconsidered and regard number of employed oriental medicine doctor. - Standard of 1995 : The number of survival oriental medicine doctor is 8195. the number of employed oriental medicine doctor is 7419. 2) demand - derivated demand method Daily the average amount of medical treatment: according to medical insurance federation data. there is 16 or 6 non allowance patient, we consider amount of medical treatment as 22 persons in practical because 21.94 persons (founded practical examination) are converted to allowance in comming demand. Daily the proper amount of medical treatment: 7 hours form -35 persons 5 hours 30 minutes form -28 persons. Yearly medical treatment days: 229 days. 255 days. 269 days . Increasing rate of visiting hospital days: -1996 year. 1997 year. 1998 year- . Rate of applying insurance: yearly average 71.51% (among the investigated patient) B. Comparison of total sum result 1) supply (provision) Table Ⅳ-1 below shows the estimation of the oriental medicine doctor in the future.
Yang, Byoung Seon;Lim, Yong;Kim, Yoon Sik;Oh, Yeon Suk;Bae, Do Hee;Choi, Se Mook
Korean Journal of Clinical Laboratory Science
/
v.52
no.2
/
pp.158-163
/
2020
This study examines and presents reasonable improvement measures for the operation and revision of the relative value scoring system, and the basis for performance of a medical technologist. Seven hospitals were enrolled in the study, and included 5 resident laboratory medicine specialists and 53 medical technologists, giving a ratio of 10.6 technologists per laboratory medicine specialist. The average of professional manpower scores was 18, and the average of each medical institution's total score was 78. Ratings and additional rates were in the range 2~3%, and quality-added ratios were 2~3%, with no significance. Excluding pathological testing and assessing physiological functions, the average number of diagnostic tests for health insurance claims were 9,618,062, including 4,378,146 points for 5% of the total relative value scores. According to the DEA, the appropriate number of medical technologist is one person per 49,974 points of relative value. In conclusion, our study results indicate that it would be desirable to set the appropriate workforce for medical technologist to one person per 50,000 points of relative value. Our data could be used as a basis for enhancing productivity of the workforce and balancing health care resources.
Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
/
v.7
no.6
/
pp.701-708
/
2017
The construction cost is estimated based on the drawings at the design stage and constructor will find efficient construction methods for budgeting and budgeting appropriate to the budget. Accurate quantity estimation and budgeting are critical to determining whether the project is profitable or not. However, since this process is mostly performed depending on manpower or 2D drawings, errors are likely to occur and The BIM(Build Information Modeling) program, which can be automated, is very expensive and difficult to apply in the field. In this study, 3D architectural modeling was performed using SketchUp which is a 3D modeling software and suggest a methodology for Quantity Estimation. As a result, 3D modeling was performed effectively using 2D drawings of buildings. Based on the modeling results, it was possible to calculate the difference of the quantity estimation by 2D drawing and 3D modeling. The research suggests that the 3D modeling using the SketchUp and the calculation of the quantity can prevent the error of the conventional 2D calculation method. If the applicability of the research method is verified through continuous research, it will contribute to increase the efficiency of architectural modeling and quantity Estimation work.
Kim, Insoo;Lee, Kyung-Suk;Kim, Kyung-Ran;Chae, Hye-Seon;Kim, Sungwoo
Journal of the Ergonomics Society of Korea
/
v.34
no.3
/
pp.279-291
/
2015
Objective: The purpose of the study is to evaluate appropriate weight for aged farmers in manually handling livestock feed in bags using ergonomic methods. Background: In the livestock industry in South Korea, despite the trend of aging of labor manpower, heavy items are still manually handled in many farms. In particular, among stockbreeding works, the handling of feed in bags weighing 25~30kg is reported as a cause of frequent injuries and musculoskeletal system diseases. However, studies on the standard for recommended weight allowed considering the physical characteristics of aged farmers older than 60 years with greatly decreased physical strength and muscle strength are insufficient. Method: To evaluate appropriate weight for handling of heavy livestock feed in bags, physical techniques for measuring recognized levels of physical work loads, the NLE (NIOSH lifting equation) a method that is an observation type technique, and an ergonomic modeling technique to predict compressive force imposed on L5/S1 were used. Subjects who participated in the experiment were organized into two groups of males/females with mean age exceeding 60 years, and lifting tasks were evaluated for nine weight levels. Results: Based on the results of psychophysical measurement, females showed a tendency of more drastic increases compared to males when weight was over 19kg. The results of estimation of regression models for the weight, 18.0 kg ($r^2=0.97$) and 15.3kg ($r^2=0.97$) were evaluated as stable load for males and females, respectively. In addition, both the observation type evaluation and ergonomic model evaluation showed stable loads in a range of 15~18kg. Conclusion: Given the results of the study, the weight of the feed in bags currently distributed to farms can become a cause of not only overexertion but also farm work related disasters such as musculoskeletal disorders and safety accidents. Providing livestock feed in bags weighing not more than 19kg for aged farmers is judged desirable, and managerial improvement for this matter is considered necessary. Application: The results of the present study can be utilized as useful data for institutional improvement of the weight of livestock feed in bags.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.