• 제목/요약/키워드: Approach Channel

Search Result 970, Processing Time 0.024 seconds

The Role of the Sedimentary Deposits (silt line) from Rivers Flowing into the Sea in the Yellow Sea Maritime Boundary (강의 퇴적물과 황해 경계획정 적용가능성에 관한 연구)

  • Yang, Hee-Cheol
    • Ocean and Polar Research
    • /
    • v.31 no.1
    • /
    • pp.31-50
    • /
    • 2009
  • The demarcation of Maritime Boundary is directly related to the expansion of jurisdiction and the securing of resources. Resource diplomacies of the three countries Korea, China and Japan represent a major task for the national administrations : to secure resources as well as to stablize and sustain resources for future national economies. At the sea area around Korea as well, countries are fiercely competing to secure resources and to expand jurisdiction. This is evidenced by the fact that various principles and logics which are beneficial to each own country are presented through international precedents, agreement between countries and the theories of the international law scholars. They say that the conclusion of demarcation of maritime boundary for the Yellow Sea would be easy from the point that there is no dispute related to island dominion in the waters of the Korean Peninsula especially the Yellow Sea, but still we need to have a strategic approach to this issue from the point that the factors used for claiming maritime boundaries may expand the waters of a country over much. For example, the continental shelf boundary in consideration of the distribution of sedimentary deposits in the Yellow Sea which is being raised by China began from the hypothesis that the inflow of sedimentary deposits to the Yellow Sea through the rivers of China represents absolute majority, but the results of the latest studies raised questions on the hypothesis. Especially, the studies done by Martin and Yang revealed that the inflow of sedimentary deposits to the Yellow Sea from the Yellow River is approximately less than 1% of total sedimentary deposits in the Yellow Sea, and also the result of analysis on the causes and counter policy measures on the environment of Bohai, China supports the reliability of the results of such studies. From a legal aspect, the sedimentary deposits of rivers which are claimed by China represent extremely weak ground for the claim for the title of the continental shelf. The siltline claimed by China seems to be based on the Article 76-4-(a)(i) of UNCLOS. This is, however, not the definition on the title of the continental shelf but it is only a technical formula to utilize in a case where a country desires to expand the continental shelf to over 200 nautical miles. Scientific and Technical Guidelines of the Commission on the Limits of the Continental Shelf also confirm this point through the Article 2.1.2 of the Guideline. The only case in which sedimentary deposits of rivers were referred to as concrete demarcation of maritime boundary was in the which was concluded in 1986 between India and Myanmar at the Andaman Sea. In the said case, India acknowledged the boundary up to the isobath of 200m which Myanmar claimed based on the sedimentary deposits of the Irrawaddy River. It has limits as a case for acknowledging the sedimentary deposits, however, because in fact India's acknowledgment was made in exchange for the condition that Myanmar gave up the dominion of two islands which they had been claiming from India up until that time.

Variation of probability of sonar detection by internal waves in the South Western Sea of Jeju Island (제주 서남부해역에서 내부파에 의한 소나 탐지확률 변화)

  • An, Sangkyum;Park, Jungyong;Choo, Youngmin;Seong, Woojae
    • The Journal of the Acoustical Society of Korea
    • /
    • v.37 no.1
    • /
    • pp.31-38
    • /
    • 2018
  • Based on the measured data in the south western sea of Jeju Island during the SAVEX15(Shallow Water Acoustic Variability EXperiment 2015), the effect of internal waves on the PPD (Predictive Probability of Detection) of a sonar system was analyzed. The southern west sea of Jeju Island has complex flows due to internal waves and USC (Underwater Sound Channel). In this paper, sonar performance is predicted by probabilistic approach. The LFM (Linear Frequency Modulation) and MLS (Maximum Length Sequence) signals of 11 kHz - 31 kHz band of SAVEX15 data were processed to calculate the TL (Transmission Loss) and NL (Noise Level) at a distance of approximately 2.8 km from the source and the receiver. The PDF (Probability Density Function) of TL and NL is convoluted to obtain the PDF of the SE (Signal Excess) and the PPD according to the depth of the source and receiver is calculated. Analysis of the changes in the PPD over time when there are internal waves such as soliton packet and internal tide has confirmed that the PPD value is affected by different aspects.

A Fast Error Concealment Using a Data Hiding Technique and a Robust Error Resilience for Video (데이터 숨김과 오류 내성 기법을 이용한 빠른 비디오 오류 은닉)

  • Kim, Jin-Ok
    • The KIPS Transactions:PartB
    • /
    • v.10B no.2
    • /
    • pp.143-150
    • /
    • 2003
  • Error concealment plays an important role in combating transmission errors. Methods of error concealment which produce better quality are generally of higher complexity, thus making some of the more sophisticated algorithms is not suitable for real-time applications. In this paper, we develop temporal and spatial error resilient video encoding and data hiding approach to facilitate the error concealment at the decoder. Block interleaving scheme is introduced to isolate erroneous blocks caused by packet losses for spatial area of error resilience. For temporal area of error resilience, data hiding is applied to the transmission of parity bits to protect motion vectors. To do error concealment quickly, a set of edge features extracted from a block is embedded imperceptibly using data hiding into the host media and transmitted to decoder. If some part of the media data is damaged during transmission, the embedded features are used for concealment of lost data at decoder. This method decreases a complexity of error concealment by reducing the estimation process of lost data from neighbor blocks. The proposed data hiding method of parity bits and block features is not influence much to the complexity of standard encoder. Experimental results show that proposed method conceals properly and effectively burst errors occurred on transmission channel like Internet.

Applications of SMCRE Model on Social Amplification of MERS Risk Information and its Implications (메르스 위험정보유통의 사회적 확산에 관한 SMCRE 모형의 적용과 함의)

  • Choi, Choong-Ik;Bae, Suk-Kyeong;Kim, Chul-Min
    • Journal of Distribution Science
    • /
    • v.14 no.6
    • /
    • pp.89-98
    • /
    • 2016
  • Purpose - This article tackles risk communication issues and aims to address the characteristics of MERS risk information distribution in South Korea, and secondly to examine the communicative behavior of the public health authority in terms of the quality of communication strategies. Thirdly, the study attempts to figure out the risk communication to cope with MERS through the applications of SMCRE model in chronological order. We employ the social amplification of risk framework for analyzing the emergent public response as one of the main approaches. Research Design, Data and Methodology - The main framework of this study is theoretically based on the social amplification of risk, which describes signals about risk transmitted and processed by individuals and social groups. The model also reflects the interactions between social groups and institutes about disaster-related risk issues, which are potential amplifiers or attenuators of communication signals. S-M-C-R-E Model is methodologically employed to examine the social amplification for MERS risk information in each period, which we defined operationally. The proposed methodology allows the assessment of effectiveness and ineffectiveness on risk communication to be conceptualized as a countermeasure against disasters. The paper focuses on exploring how social risk amplification can be applied and organized in each stage. Results - The SMCRE model describes the exchange of risk information and is also applied to all forms of communication between stakeholders including public health authority, local government and media. Each factor of risk communication includes source, message, channel, receiver and effect. The results support that the effective risk communication involves not only the improved reliability of public health authority as a key factor of risk communication, but also a close cooperation and good collaboration with local governments. It does not seem to be possible that the government-initiated risk communication based on controllability and management cope effectively with infectious disease in early stage. The results of this study imply that the shared risks between local, regional and national authorities can enhance risk communication system. Conclusions - The study supports that the disparities in how disaster-related risk information is interpreted and coded, have made effective risk communication and public sense-making impeded. Our findings support a more communicative discussion about the role of risk information sharing between governments for the improvement of emergency management and underline the importance of social elements in the risk communication, such as relationship and trust building. Findings suggest that trust building between stakeholders could be added to help explain the processes of social amplification and attenuation of risk. It would be recommended that the continuous risk communication with all the involved stakeholders will be able to help national health promotion policy to be improved regarding emergency management. Furthermore, risk communication has to be a scientific approach for the communication pertaining to potentially sensitive or controversial situations with public concerns and low public trust.

A Study on Flow Distribution to Flocculation Basins Using DOE and RSA (실험계획법과 반응표면분석법을 적용한 응집지로의 유량분배에 관한 연구)

  • Kim, Seong-Jae;Kyung, Gyu-Sun;Jeong, Heui-Jung;Kim, Hyeong-Seop;Yang, Sa-Sun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.12
    • /
    • pp.918-928
    • /
    • 2013
  • The inequitable flow distribution to flocculation basins is an important problem faced in many water treatment plants. This is caused by the structure of a distribution channel, the height differences of outlet weirs etc. But, a modified approach for the structures has no effectiveness to achieve flow equality. The aim of this study is to reduce the inequality by adopting optimized inlet valve opening (%) of the flocculation basins using DOE (Design of Experiments) and RSA (Response Surface Analysis). The inlet valve openings (%) and inflow distributions (%) of 6 paralleled basins were set as factors (X) and characteristics(Y) respectively. 2 level factorial experiments and RSA were conducted for optimization and regression analysis (Y = f(X) + Const.). Adopting the optimized inlet valve opening (%) at field, standard deviation of flow distribution (%) and effluent turbidity was declined from 3.80% to 0.42% and from 0.29 NTU to 0.03 NTU respectively.

An Experimental Study on Tip Velocity and Downstream Recirculation Zone of Single Groyne Conditions (단일 횡수제 조건에 따른 선단부 유속과 재순환 영역에 대한 실험 연구)

  • Kang, Joon-Gu;Yeo, Hong-Koo;Kim, Sung-Jung
    • Journal of Korea Water Resources Association
    • /
    • v.38 no.2
    • /
    • pp.143-153
    • /
    • 2005
  • Recently, the concern of groynes that provide us with various ecological environment and improvement of scenary near river as well as hydraulic improvement has greatly increased for naturalized river and ecological river restoration. However there is no adequate design guidelines in Korea. Furthermore there is lack of research for installation of groynes in Korea. Thus, in this study, we have conducted hydraulic modeling test for kinds of groyne and changes of permeability and made a study of the analysis for installation factor of groyne. Experimental conditions were the fixed bed model for flow pattern of groyne tip and separation length about changes of groyne length and permeability. The Experiments were conducted to measure velocity and drift angle at groyne tip. The main study kas measured the groyne tip velocity for a factor of scour and drift angle for velocity increase at center of channel. We have suggested the equation about groyne tip velocity rate(tip velocity/ approach velocity) and area rate(groyne area/ flow area). And In recirculation zone of groyne downstream, To study the basic data of groyne about installation interval has analyzed the change of separation length and incidence angle. We have suggested the equation about separation length rate(separation length/ groyne length), changes of permeability and installation angle.

Structuring of Integrated Design System Based on Emotion Process Model for Successful Brand Image Building (성공적 브랜드 이미지 구축을 위한 감성 처리 모형 기반의 통합 디자인 체계 구성)

  • Kim, Hyun
    • Science of Emotion and Sensibility
    • /
    • v.11 no.1
    • /
    • pp.57-68
    • /
    • 2008
  • With the shift of consumer’s spending behaviors further into emotionally-driven purchases, the role of brand is becoming even more important, which in turn, expands design’s role in the brand image strategy. The contact point between the consumers and the brand is the primary channel for building strong brand image through experience. Therefore, it is critical to comprehensively plan and manage the consumer contact point for any brand. Given the changing market conditions, the objective of this study is to define and structure an integrated design development and management system for building successful brand image. In order to do so, the research analyzed the characters of brand image, the conditions for consumer experience and the roles of emotion. The analysis into the correlation between images and emotion process model yields three natures of an image. The image 1) is based on empirical decisions, 2) expresses and conveys emotional aspects and 3) builds mental values through a sense of sympathy. Through case studies of successful designs that meet all three characteristics, the roles of a brand icon in building strong brand image and the needs for integrated design approach for implementation are defined. The methods for integrated design include 1) providing a focal point through brand image positioning, 2) utilizing visual themes based on brand image plot, 3) building a Total Identity Program to holistically manage brand images and 4) developing brand icons for brand image reinforcement.

  • PDF

Transfection of Mesenchymal Stem Cells with the FGF-2 Gene Improves Their Survival Under Hypoxic Conditions

  • Song, Heesang;Kwon, Kihwan;Lim, Soyeon;Kang, Seok-Min;Ko, Young-Guk;Xu, ZhengZhe;Chung, Ji Hyung;Kim, Byung-Soo;Lee, Hakbae;Joung, Boyoung;Park, Sungha;Choi, Donghoon;Jang, Yangsoo;Chung, Nam-Sik;Yoo, Kyung-Jong;Hwang, Ki-Chul
    • Molecules and Cells
    • /
    • v.19 no.3
    • /
    • pp.402-407
    • /
    • 2005
  • Bone marrow mesenchymal stem cells (MSCs) have shown potential for cardiac repair following myocardial injury, but this approach is limited by their poor viability after transplantation. To reduce cell loss after transplantation, we introduced the fibroblast growth factor-2 (FGF-2) gene ex vivo before transplantation. The isolated MSCs produced colonies with a fibroblast-like morphology in 2 weeks; over 95% expressed CD71, and 28% expressed the cardiomyocyte-specific transcription factor, Nkx2.5, as well as ${\alpha}$-skeletal actin, Nkx2.5, and GATA4. In hypoxic culture, the FGF-2-transfected MSCs (FGF-2-MSCs) secreted increased levels of FGF-2 and displayed a threefold increase in viability, as well as increased expression of the anti-apoptotic gene, Bcl2, and reduced DNA laddering. They had functional adrenergic receptors, like cardiomyocytes, and exposure to norepinephrine led to phosphorylation of ERK1/2. Viable cells persisted 4 weeks after implantation of $5.0{\times}10^5$ FGF-2-MSCs into infarcted myocardia. Expression of cardiac troponin T (CTn T) and a voltage-gated $Ca^{2+}$ channel (CaV2.1) increased, and new blood vessels formed. These data suggest that genetic modification of MSCs before transplantation could be useful for treating myocardial infarction and end-stage cardiac failure.

Accuracy Analysis of Velocity and Water Depth Measurement in the Straight Channel using ADCP (ADCP를 이용한 직선 하천의 유속 및 수심 측정 정확도 분석)

  • Kim, Jongmin;Kim, Dongsu;Son, Geunsoo;Kim, Seojun
    • Journal of Korea Water Resources Association
    • /
    • v.48 no.5
    • /
    • pp.367-377
    • /
    • 2015
  • ADCPs have been highlighted so far for measuring steramflow discharge in terms of their high-order of accuracy, relatively low cost and less field operators driven by their easy in-situ operation. While ADCPs become increasingly dominant in hydrometric area, their actual measurement accuracy for velocity and bathymetry measurement has not been sufficiently validated due to the lack of reliable bench-mark data, and subsequently there are still many uncertain aspects for using ADCPs in the field. This research aimed at analyzing inter-comparison results between ADCP measurements with respect to the detailed ADV measurement in a specified field environment. Overall, 184 ADV points were collected for densely designed grids for the given cross-section that has 6 m of width, 1 m of depth, and 0.7 m/s of averaged mean flow velocity. Concurrently, ADCP fixed-points measurements were conducted for each 0.2m and 0.02m of horizontal and vertical spacing respectively. The inter-comparison results indicated that ADCP matched ADV velocity very accurately for 0.4~0.8 of relative depth (y/h), but noticeable deviation occurred between them in near surface and bottom region. For evaluating the capacity of measuring bathymetry of ADCPs, bottom tracking bathymetry based on oblique beams showed better performance than vertical beam approach, and similar results were shown for fixed and moving-boat method as well. Error analysis for velocity and bathymetry measurements of ADCP can be potentially able to be utilized for the more detailed uncertainty analysis of the ADCP discharge measurement.

Evaluating Policy Priorities in Small Agricultural Cooperatives for Distribution Systems (농업분야 소규모 협동조합 유통체계 구축을 위한 우선순위 평가)

  • Kim, Chang-Hwan;Hwnag, Dae-Yong
    • Journal of Distribution Science
    • /
    • v.13 no.12
    • /
    • pp.65-71
    • /
    • 2015
  • Purpose - Domestic cooperatives tend to increase during the establishment of cooperatives and gradually through the basic law of social needs. However, only cooperatives' qualitative grow this secured without blessings, and their quantitative growth through government support is questionable. The purpose of this study is to analyze the agricultural cooperatives established through the Distribution System Cooperatives Basic Law, which was enacted in January 2012. Subsequently, establishing agricultural cooperatives was done briskly. However, cooperatives established rapidly after the founding of the Basic Law encountered problems. Research design, data, and methodology - To assess the performance of selected agricultural cooperatives, data were analyzed using the methodological Analytic Hierarchy Process (AHP) approach. The AHP is a set of systematic procedures to hierarchically analyze the elements of any problem. Using a survey on expertise, a series of comparative determinations of each pair is performed to evaluate the relative strengths and the strengths of the impact between elements within the hierarchy. A survey was conducted on 10 small agricultural cooperatives using AHP analysis for the examination. The purpose of such research and analysis is to recommend a direction for future policies aimed at small agricultural cooperatives. Result - This study applied three types of policy evaluation criterion, including market expansions, organizations, and cooperative projects, and 12 types of small agricultural cooperative policy measures. Market expansion policies for agricultural cooperatives are classified into four categories: school meals, direct transactions, shopping malls, and wholesale markets. Organizational policies for agricultural cooperatives are classified into four types: existing sales channel management, education, preventing free riding, and enlarging members. Cooperative project policies in agricultural cooperatives are classified into four policy areas: cooperation between cooperatives, community contribution, joint businesses, and government links. In this paper, the growth priority in agricultural cooperative policies is analyzed by applying policy evaluation criteria on the basis of a survey on expertise. The priorities of the policy program are also analyzed using a decision analytic hierarchy process. The results indicate that market expansion is the most important policy evaluation criterion therefore, improving direct transactions, school meals, management of existing sales channels, and shopping malls are crucial policy measures. In contrast, the cooperation of cooperatives, expansion of union members, and cooperation with the government were found to have low priority. Conclusions - Agricultural cooperatives should develop plans as follows. Small agricultural cooperatives need to secure school meals and direct transactions for market expansion, restructure marketing strategies to manage existing sales channels, and, finally, increase education and training for sustainable organizational development. This study has the following limitations. Because the subject of the investigation is a new cooperative, determining its sustainable growth is difficult. Therefore, through analysis and a continuous study of cooperatives, future research is expected to show that modifying the direction of agriculture cooperatives is necessary.