• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.1-4
• /
• 2007

This study investigated the applicability of insulation curing method with double layer bubble sheets to the man concrete subjected to cold weather. Temperature history of the mass concrete indicated that the highest temperature of center section was exhibited at $34^{\circ}C$ while the that of surface section was $25^{\circ}C$. Difference between center and surface was shown to be less $10^{\circ}C$ when the temperature of center section was peak section, and thereby associated temperature cracking index was calculated 1.5, and occurrence probability of temperature cracking was 5%, so there was no temperature cracking caused by internal restraint. No temperature crack was observed by naked eye. It was clear that early frost demage and temperature cracking could be restrained due to reducing temperature difference between inner part and outside in the case double bubble sheets applied to insulation curing method in cold weather. The maturity of mass concrete is higher than outside about $72\sim89^{\circ}$ DD, so it was demonstrated to prevent early frost demage and ensure strength excellently. Insulation curing method with double bubble sheets was more economic than heating curing method.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.3
• /
• pp.619-630
• /
• 2009

To investigate the hair growth activity of fractions and extract of Arisaematis Rhizoma in the hair removed skin of normal and spontaneous alopecia areata model in C57B/6N mice. These experiments were performed with the macroscopic, microscopic, immunohistochemical(VEGF, c-kit, PKC-${\alpha}$, TGF and FGF) and RT-PCR(TGF-${\beta}$, IGF, prolactin and placenta lactogen) methods. The results were as follows: Macroscopic observation after topical application of vehicle, 50% EtOH as control and extract of Arisaematis Rhizoma to the hair removed skin of C57BL/6N mice on the 9th, 11th and 15th day. Extensive hair growth activity was observed in treated group with extract of Arisaematis Rhizoma on the 9th, 11th and 15th day. In Arisaematis Rhizoma extracts treated group, hair follicles of middle stage of anagen was observed and it were grown down to subcutaneous tissue of skin in all the normal mice on 15th day. But in control group, most of hair follicles of telogen phase was observed in skin. The treatment of extract of Arisaematis Rhizoma increased expression of IGF(145%) and placenta lactogen(108%) in the skin of normal C57BL/6N mice on the 11th day compared to control group(100%). But expression of TGF-${\beta}$(90%) and prolactin(91%) decreased in the skin of normal C57B/6N mice on the 11th day compared to control group(100%). After application of fractions(chloroform, ethyl acetate and water fractions) of Arisaematis Rhizoma extract for 9th day, hair growth effect was observed in whole skin area in 50% of normal mice. But in control group, hair growth effect was not observed in whole skin area of normal mice. Immunoreactive density of VEGF, c-kit, PKC-${\alpha$ and FGF in skin of fractions of Arisaematis Rhizoma extracts was strongly stained in epidermis, bulge, secondary hair germ cells, cutaneous trunci m., subcutaneous tissue, root sheath compare to control group on the 9th day. In spontaneous alopecia areata model, The hair growth activity of Arisaematis Rhizoma extrat treated group(75%) was observed to be strong compared to control group(O%) on 7th day. These experiments suggest that fractions and extracts of Arisaematis Rhizoma may stimulate the topical hair growth activity. Thus it can be useful for treatment of alopecia areata.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.1
• /
• pp.29-35
• /
• 2004

The effect of low tempering in a temperature range of $150{\sim}400^{\circ}C$ on corrosion resistance in 420J2 stainless steel austenitized at $1000^{\circ}C$ was investigated by the application of salt spray test, electrochemical pitting test in 3.5% NaCl solution and DL-EPR test for intergranular corrosion in 0.5M $H_2SO_4$+0.01M KSCN solution. In salt spray test, good corrosion resistance was obtained in a tempering temperature range of $150{\sim}250^{\circ}C$. Pitting potential was increased to the tempering temperature of $250^{\circ}C$, but decreased with the increase of temperature up to $400^{\circ}C$ And it was thought that the degradation of pitting corrosion resistance showed at the tempering temperature of around $400^{\circ}C$ was due to the precipitation of $Cr_7C_3$ of $M_7C_3$ type. The degree of sensitization showed increasing tendency with the increase of tempering temperature, and also Cr depletion phenomena were observed in the vicinity of grain boundary.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.6
• /
• pp.588-593
• /
• 2023

The advantage of OTFT technology is that large-area circuits can be manufactured on flexible substrates using a low-cost solution process such as inkjet printing. Compared to silicon-based inorganic semiconductor processes, the process temperature is lower and the process time is shorter, so it can be widely applied to fields that do not require high electron mobility. Materials that have utility as electrode materials include carbon that can be solution-processed, transparent carbon thin films, and metallic nanoparticles, etc. are being studied. Recently, a technology has been developed to facilitate charge injection by coating the surface of the Al electrode with solution-processable titanium oxide (TiOx), which can greatly improve the performance of OTFT. In order to commercialize OTFT technology, an appropriate method is to use a complementary circuit with excellent reliability and stability. For this, insulators and channel semiconductors using organic materials must have stability in the air. In this study, carbon-doped Mo (MoC) thin films were fabricated with different graphite target power densities via unbalanced magnetron sputtering (UBM). The influence of graphite target power density on the structural, surface area, physical, and electrical properties of MoC films was investigated. MoC thin films deposited by the unbalanced magnetron sputtering method exhibited a smooth and uniform surface. However, as the graphite target power density increased, the rms surface roughness of the MoC film increased, and the hardness and elastic modulus of the MoC thin film increased. Additionally, as the graphite target power density increased, the resistivity value of the MoC film increased. In the performance of an organic thin film transistor using a MoC gate electrode, the carrier mobility, threshold voltage, and drain current on/off ratio (I_on/I_off) showed 0.15 cm²/V·s, -5.6 V, and 7.5×10⁴, respectively.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.21-27
• /
• 1993

Fluid inclusion has been widely used to study the origin and physiochemical conditions of ore deposits. However, it is difficult to get the accurate physiochemical data from fluid inclusion study due to the error of microthermometric data and the complexity of calculation of density and isochore of fluid inclusion. The computer programs HALWAT, $CO_2$, and CHNACL written by Nicholls and Crowford (1985) partly contributed to improve the accuracy of physiochemical data by using complicated equations. These programs are applied to determine the densities and isochores of fluid inclusions for the Cretaceous Keumhak mine using Choi and So's data (1992) and for the Jurassic Samhwanghak mine using Yun's data (1990). The estimated PoT for Keumhak mine from calculated isochores of coexisting fluid inclusions are $230^{\circ}{\sim}290^{\circ}C$ and 500~800 bar which matche well to the poT estimated by Choi and So ($280^{\circ}{\sim}360^{\circ}C$ and 500~800 bar, 1992). However, the poT for Samwhanghak mine estimated in this study by combining the calculated isochores and sulfur isotope geothermometer data by Yun (1990) are about 4~7 kb at $329{\pm}50^{\circ}{\sim}344{\pm}55^{\circ}C$ which are quite different form the P-T estimates by Yun ($255^{\circ}{\sim}294^{\circ}C$ and 1.2~1.9kb, 1990). This discrepancy caused by misinterpretation of homogenization temperature (Th) of fluid inclusion and by application of inappropriate isochores. The application of homogenization temperature and/or inappropriately selected isochore to determine the trapping PoT condition of ore-deposits should be avoided, particularly for ore-deposits formed at pressures higher than 1~2 kb.

• Journal of Intelligence and Information Systems
• /
• v.9 no.1
• /
• pp.139-155
• /
• 2003

This paper presents the new methodology of analyzing and classifying patterns of customers in mobile telecommunication market to enhance the performance of predicting the credit information based on the decision tree and neural network. With the application of variance selection process from decision tree, the systemic process of defining input vector's value and the rule generation were developed. In point of customer management, this research analyzes current customers and produces the patterns of them so that the company can maintain good customer relationship and makes special management on the customer who has huh potential of getting out of contract in advance. The real implementation of proposed method shows that the predicted accuracy is higher than existing methods such as decision tree(CART, C4.5), regression, neural network and combined model(CART and NN).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.2
• /
• pp.207-215
• /
• 2004

The PLC programming by IEC1131-3 is hard to handle to ordinary users as well as professionals. Also it has not a generality, so that it couldn't be debugging some logic errors easily. In order to be adapted for such environment, In this paper, I have developed the ISPLC(Intelligent Agent System based Software Programmable Logic Controller). In ISPLC system, LD programmed by a user is converted to the C code which can be used in a commercial editor such as Visual C++. The detection of logical errors in C code is more effective than PLC programming itself. ISPLC provides the GUI-based interface in web environment and an easy programming platform to such beginners as well as professionals. The study of code conversion of LD to IL as well as IL to C is firstly tried in the world as well as KOREA. To show the effectiveness of the developed system, I applied it to a practical case, a real time traffic control system. ISPLC is minimized the error debugging and programming time owing to be supported by windows application programs.

• Korean journal of applied entomology
• /
• v.7
• /
• pp.39-51
• /
• 1969

The study involved determination of resistance levels of spider mites ta argano-phosphates using topical application and slide dip techniques; laboratory serening tests of alternative acaricides using an O/P resistant strain and a field trial of the screened materials. 1. Strains of Tetranychus were from Timaru(TR), Havelock Narth (HNR), Lincaln (LN). Germany (GR, GN). Comparisons of the resistant strains and normal strains at the LD50 and LC50 levels were as follows : (a) Using the topical application tochnique; with Parathian. resistant levels of the GR. TR and HNR strains of T. urticae were respeativuly, 1035. 484 and 452 times as resistant' as the LN strain. (b) Using the slide dip technique; with Phosdrin, resistant of GR, TR and HNR strains of T. urticae were 635, 274 and 266 times greater respeativuly, than the GN strain. 2. The laboratory sereaning tests were carried out far their contact plus stomach and residual effect to assess the toxicities of eleven alternative materials which would be used far control of O/P resistant strain of T. urticae. The acaricide groups represented were 3 organo-chlorines (Spidex, Kelthane and C 8514), 2 nitrophenyls (UC 19786 and Morocide), 2 cyclic carbonates(Eradex and Morestan). I carbamate (UC2004 7A), 1 mixture of carbamate and orano-chlorine and 2 other chemicals (C 8677 and M2527). From all acaricide tested. Kelthane and Morocide were the most effective, folowed by Spidex and M2527. Morestan, C8514. C8677 and RS 143 were intermediate, but Eradex, UC 19786 and UC 20046A were poor. 3, The number of sapmles required for estimation of the population in the field evaluation of acaricidal effects was one giving the highest practical precision. It was decided, after preliminary sampling trials. to use samples of 30 leaves per replicate which gave a $5.7\%$ standard error. 4. In the field trials, Morocide applied at the $0.05\%\;and\; 0.04\%$ a. i. conc. to black currant trees gave excellent control of O/P resistant population of T. urticae for about 12 days, but Morocide 0.025 and Kel thane $0.02\%$ a. i. cone. gave efficient control for about 6 days. In other words. first applications of Kel thane ane Moroeide gave very high degrees of control of O/P resistant population of the two-spotted spider mite. However, the results indicate that secondary application would sometimes be necessary. There was no foliage damage of black Currants and strawberries by either acaricides at the concentrations used. Acknowledgment ... The authors are grateful to: Dr. R. P. pottinger, Senior Lecturer in Agricultural Zoology. Lincoln college. New Zealand. for his helpful assistance in aiding with the organization of thd field work. Department of agriculture officers for mite colonies. Mr. D. A. Slade, Technical Advisor. Fruitgrowers' Federation (now at Massey University) for his assistance and provision of mites for testing. Mr T. McRae of Timaru for permission to use his crops for field tests. The following chemical companies and I or their New Zealand agents for so readily supplying samples of acarides; Ivan Watkins-Dow Limited. Fruitgrowers Chemical Company Limited. Henry H. York & company (New Zealand). Shell Oil (New Zealand) Limited.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.61-66
• /
• 2013

In this paper, temperature dependence of matching characteristics of $Si_3N_4$ MIM capacitor was analyzed in depth. The matching characteristics becomes worse as the temperature increases. That is, the matching coefficient of $Si_3N_4$ MIM capacitor at $25^{\circ}C$, $75^{\circ}C$, and $125^{\circ}C$ was 0.5870, 0.6151, and $0.7861%{\mu}m$, respectively. This phenomena is believed to be due to the reduction of the carrier mobility and the increase of the charge concentration of the inner capacitor at greater temperature. Therefore, the analysis of the matching characteristics of $Si_3N_4$ MIM capacitors at high temperatures is essential for application to analog and SoC (System on Chip) circuit.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.6
• /
• pp.377-382
• /
• 2013

A convergence software development methodology based on product line engineering provides an architecture model for application development and it also provides workflow as a behavior specification of control component development to develop transaction centric application. To effect a change on software development based on product line engineering it has to be supported by a tool. But almost workflow modeling tools dose not support product line engineering concept. So we need new workflow modeling tool to support the convergence software development methodology. In this paper, we introduce a toolset for workflow modeling that consists of eclipse plug-in applications and open source tool and describe the relationships of tools through example.