• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.95-101
• /
• 2009

Random numbers are used in many sorts of applications. Some applications, like simple software simulation tests, communication protocol verifications, cryptography verification and so forth, need various levels of randomness with various process speeds. In this paper, we propose a fast pseudorandom generator module for embedded systems. The generator module is implemented in hardware which can run in two modes, one of which can generate random numbers with higher randomness but which requires six cycles, the other providing its result within one cycle but with less randomness. An ASIP (Application Specific Instruction set Processor) was designed to implement the proposed pseudorandom generator instruction sets. We designed a processor based on the MIPS architecture,, by using LISA, and have run statistical tests passing the sequence of the Diehard test suite. The HDL models of the processor were generated using CoWare's Processor Designer and synthesized into the Dong-bu 0.18um CMOS cell library using the Synopsys Design Compiler. With the proposed pseudorandom generator module, random number generation performance was 239% faster than software model, but the area increased only 2.0% of the proposed ASIP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.135-141
• /
• 2018

In this paper, we describe design and implementation of optimal smart home control system. Recent developments in technologies such as sensors and communication have enabled the Internet of Things to control a wide range of objects, such as light bulbs, socket-outlet, or clothing. Many businesses rely on the launch of collaborative services between them. However, traditional IoT systems often support a single protocol, although data is transmitted across multiple protocols for end-to-end devices. In addition, depending on the manufacturer of the Internet of things, there is a dedicated application and it has a high degree of complexity in registering and controlling different IoT devices for the internet of things. ARIoT system, special marking points and edge extraction techniques are used to detect objects, but there are relatively low deviations depending on the sampling data. The proposed system implements an IoT gateway of object based on OneM2M to compensate for existing problems. It supports diverse protocols of end to end devices and supported them with a single application. In addition, devices were learned by using deep learning in the artificial intelligence field and improved object recognition of existing systems by inference and detection, reducing the deviation of recognition rates.

• Journal of Gastric Cancer
• /
• v.5 no.2
• /
• pp.79-88
• /
• 2005

Quality assurance may be defined as the complete set of systemic actions that is required to achieve a better treatment result by standardizing treatment and by using various audit programs. In general, application of a quality assurance program in surgery is considered to be more difficult than it is in chemotherapy or radiotherapy. However, recently, the importance of quality assurance in the surgical field has been emphasized in clinical trials comparing different surgical procedures and evaluating the role of postoperative adjuvant therapy. In the case of gastric cancer surgery, excellent quality assurance programs have rarely been applied in most large prospective clinical trials. Although the quality assurance in Dutch trial was conducted very systemically and strictly, the situation is quite different from ours. On the other hand, several quality assurance programs in Japanese trials comparing D2 and D2 plus para-arotic lymph node dissection seem to be applicable to Korean clinical trials. Several factors, including selection of appropriate surgeons based on personal experience and annual number of operations, standardization of surgical procedures by education and consensus, development of a unified database program, application of standardized perioperative management, and standardization of pathologic examination, are required to guarantee a successful multi-institutional prospective clinical trial. In contrast, one needs to realize that protocols that are too strict and sophisticated can make the enrollment of patients and surgeons more difficult and can promote protocol violation during the clinical trials. (J Korean Gastric Cancer Assoc 2005;5:79-88)

• Research in Plant Disease
• /
• v.17 no.2
• /
• pp.142-147
• /
• 2011

In order to develop a environmentally friendly control protocol for managing tomato leaf mold disease in the field, we employed bacteria- and fungi-based commercially available microbial preparations. The field experiment was conducted from April to July in 2010. Average incidence rates tomato leaf mold caused by Fulvia fulva were 13.1% at the two plastic houses located in Jangsung, Jeonnam area. Initially 11 microbial preparations were tested for antifungal activity against F. fulva in vitro. Among them, 7 selected preparations showed to be inhibited the mycelial growth of the fungal pathogen over 50%. Four microbes suppressed disease incidence as much 50% under greenhouse condition. Eventually in the field two microbial products including Bacillus subtilis GB-0365 and B. subtilis KB-401 respectively were showed control value up to 71.8% for four times sprays from 20 days to 70 days after transplanting. Furthermore, the control value of three times spray program demonstrated 79.3%. Efficacy of the three and four spray programs was more effective than that of non-spray control treatment. Our results indicated that adjustment of application method of commercially available microbial preparation could be used to control a target plant disease as an effective and efficient crop protection system for organic farming.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.53-63
• /
• 2012

As a result of the economical loss caused by unusual climate changes resulting from emission of excessive green house gases such as carbon dioxide which is expected to account for 5~20% of the world GDP by 2100, researching technologies regarding the reduction of carbon dioxide emission is being favored worldwide as a part of the high value-added industry. As one of the Annex II countries of Kyoto Protocol of 1997 that should keep the average $CO_2$ emission rate of 5% by 2013, South Korea is also dedicated to the researches and industries of $CO_2$ emission reduction. In this study, Application of LiDAR data & KOMPSAT-2 satellite image for calculated forest Biomass. Raw LiDAR data's tree numbers and tree-high with field survey data resulted in 90% similarity of objects and an average of 0.3m difference in tree-high. Calculating the forest biomass through forest type information categorized as KOMPSAT-2 image and LiDAR data's tree-high data of tree enabled the estimation of $CO_2$ absorption and forest biomass of forest type, The similarity between the field survey average of 90% or higher were analyzed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.969-976
• /
• 2009

Use of oocytes from prepubertal animals for in vitro embryo production holds potential application for reducing generation intervals and increasing genetic progress through embryo transfer. The objective of these studies was to compare the effect of three sperm pretreatments (prior to in vitro fertilization) and seven embryo culture protocols on fertilization rate and (or) subsequent development of in vitro fertilized embryos derived from oocytes harvested from ovaries of 1-6 month old prepubertal Boer goats in China. Cleavage rates were highest for embryos fertilized with heparin-treated versus calcium ionophore- or caffeine-treated sperm. Similar rates of blastocyst development were observed using heparin- and ionophore-treated sperm, which were higher than obtained with caffeine-treated sperm. No differences in cleavage or blastocyst rates were observed following embryo culture in basal medias (synthetic oviductal fluid (SOF), Charles Rosenkrans 1 (CR1) or tissue culture medium-199 (TCM-199)) containing 10% fetal bovine serum (FBS). Cumulus or oviductal cell co-culture did not enhance cleavage or blastocyst rates relative to culture in SOF+10% FBS. Replacement of FBS in SOF medium with 0.3% BSA increased cleavage rates, but did not increase rates of blastocyst development. Sequential culture in SOF+0.3% BSA followed by SOF+10% FBS increased blastocyst yield versus continuous culture in SOF+10% FBS and tended to increase blastocyst yield versus continuous culture in SOF+0.3% BSA. These results demonstrate a pronounced effects of sperm pretreatments and in vitro embryo culture systems on rates of blastocyst development and provide a potential protocol (sperm pretreatment with heparin and sequential embryo culture in SOF+0.3% BSA followed by SOF+10% FBS) for generation of the significant numbers of in vitro produced blastocysts from oocytes of prepubertal Boer goats necessary for application of embryo transfer in rural regions of China for distribution of Boer goat genetics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.512-521
• /
• 2003

In this paper, we introduce our experience of the design and implementation of mobile collaboration system(MCS) that support people using mobile devices to participate in cooperative session. There are considerable differences between desktop PC and mobile devices like PDA in processing ability, resolution of display and color degree. In the case of mobile devices, they use different processors and different operating system and they have even differences in ability of executing application. The mobile collaborative system based on T.120 protocol of ITU-T standard compromised of mobile collaboration server, mobile collaboration client, session node and application. We also define the session node in desktop PC in which session control block and communication block runs. This node provide functions of session control block and communication block to mobile collaboration clients and so lighten load of clients. The mobile collaboration server provides information of candidates for session node, session and user to mobile collaboration client. And this server support clients to configure their own session node and manage sessions. Only the mobile collaboration client module and applications including APE are executed in a mobile device when user using mobile devices would like to participate in cooperative session. We implemented mobile collaboration client and applications with JAVA to support platform independency.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.86-95
• /
• 2014

Productivity improvement of a shipbuilding company depends on how efficiently its limited resources are managed and utilized. Recently, research on modeling and simulation (M&S) to support shipyard production management system has been being under study. The production management based on M&S rejects decision making on experience, and it can establish productivity improvement method based on quantitative and specific data. In this paper, M&S is applied to the long-term plan as a part of the production planning in shipyards. To this end, the long-term plan processes and related management systems are analyzed. Based on the analysis, a simulation model and an application system using commercial simulation software are suggested. And basic structure of the suggested system is based on web technology such as Rich Internet Application, web services protocol for compatibility with existing shipyard enterprise systems. Utilizing the results of this study, it is expected that shipyard production planners can settle down work flow, in which one can establishes the production plan, simulates the plan, and analyzes the results, enabling a more reliable production plans.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.6-16
• /
• 2008

An instable wireless channel condition causes more packet losses and retransmissions due to interference, fading, station mobility, and so on. Therefore video streaming service over a wireless networks is a challenging task because of the changes in the wireless channel conditions and time-constraints characteristics of the video streaming services. To provide efficient video streaming over a wireless networks, QoS-enhanced MAC protocol, IEEE 802.11e, is standardized recently. Tn this paper, we propose a new network-adaptive H.264 video streaming mechanism in the IEEE 802.11e wireless networks. To improve the quality of video streaming services, video stream has to adapt to the changes in the wireless channel conditions. The wireless channel conditions are estimated by the packet loss probability and informed to the application layer by the cross-layering. According to the wireless channel information, the video streaming application filters out the low-priority data. This adaptation mechanism efficiently uses system resources because it drops the low-priority data in advance. Therefore, our cross-layer design can provide improved video streaming services to the end-user. Through the implementation and performance evaluation, we prove that the proposed mechanism improves the QoS of the video streaming by providing the smoothed playback.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.33-39
• /
• 2016

With recent advances in sensor technology, CMOS-based semiconductor devices and networking protocol, the areas for application of wireless sensor networks greatly expanded and diversified. Such diversification of uses for wireless sensor networks creates a multitude of beneficial possibilities for several industries. In the application of wireless sensor networks for monitoring systems' data transmission process from the sensor node to the sink node, transmission through multi-hop paths have been used. Also mobile sink techniques have been applied. However, high energy costs, unbalanced energy consumption of nodes and time gaps between the measured data values and the actual value have created a need for advancement. Therefore, this thesis proposes a new model which alleviates these problems. To reduce the communication costs due to frequent data exchange, a State Prediction Model has been developed to predict the situation of the peripheral node using a geographic autocorrelation of sensor nodes constituting the wireless sensor networks. Also, a Risk Analysis Model has developed to quickly alert the monitoring system of any fatal abnormalities when they occur. Simulation results have shown, in the case of applying the State Prediction Model, errors were smaller than otherwise. When the Risk Analysis Model is applied, the data transfer latency was reduced. The results of this study are expected to be utilized in any efficient communication method for wireless sensor network monitoring systems where all nodes are able to identify their geographic location.