• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.389-392
• /
• 2000

In this paper, we propose a novel post processing method of deconvolution for SAR images based on phase extension inverse filtering, which improves spatial resolution as well as effectively eliminates sidelobes with low computational complexity. It extends the bandwidth only to control the magnitude of the processed SAR data without distortions of the phase in frequency domain unlike the other techniques such as spatially variant apodization (SVA), and other deconvolution techniques. We compare the image processed by the proposed method with images processed by uniform weighting function, Hamming weighting function whose coefficient is 0.75, and SVA.

• Structural Engineering and Mechanics
• /
• v.50 no.4
• /
• pp.541-561
• /
• 2014

This paper approaches the issue of seismic vulnerability assessment strategies for facade walls of traditional masonry buildings through the development of a methodology and its subsequent application to over 600 building facades from the old building stock of the historic city centre of Coimbra. Using the post-earthquake damage assessment of masonry buildings in L'Aquila, Italy, an analytical function was developed and calibrated to estimate the mean damage grade for masonry facade walls. Having defined the vulnerability function for facade walls, damage scenarios were calculated and subsequently used in the development of an emergency planning tool and in the elaboration of an access route proposal for the case study of the historic city centre of Coimbra. Finally, the methodology was pre-validated through the comparison of a set of results obtained from its application and also resourcing to a widely accepted mechanical method on the description of the out-of-plane behaviour of facade walls.

• Knowledge Management Research
• /
• v.12 no.2
• /
• pp.81-90
• /
• 2011

This paper aims at the application of knowledge management in teaching Korean traditional dance (KTD) for elderly people. KTD has been taught using the traditional method of individual verbal instructions. Applying the traditional method in teaching a group of elderly people has limitations for both instructors and for the elderly people. Because there is no uniform method in teaching KTD, each instructor has to create his or her own teaching plan. Also, due to diminishing memory among the elderly people, it is difficult for them to recall what they were verbally instructed. To overcome these limitations in teaching KTD, we propose the application of knowledge management (KM) process. The KM process will allow collecting, storing, sharing, and optimizing the tacit knowledge of KTD. The findings and implications in this study would provide insights not only for the KTD instructors but for the silver industry as well.

• International Journal of Advanced Culture Technology
• /
• v.4 no.4
• /
• pp.30-37
• /
• 2016

In this paper, the method of controlling the clock that is inputted on the hardware from the application, and the hardware design method are to be proposed. When the hardware is synthesized to the Field Programmable Gate Array(FPGA), the input clock is fixed, and when the input clock is changed, the synthesis process must be passed again to require more time. To solve this problem, the Mixed-Mode Clock Manager(MMCM) module is mounted to control the MMCM module from the application. The controlled MMCM module controls the input clock of the module. The experiment was process the Neural Network algorithm in the x86 CPU and SIMT based processor mounted the FPGA. The results of the experiment, SIMT-based processors, the time that is processed at a frequency of 50MHz was 77ms, 100MHz was 34ms. There was no additional synthesis time due to a change of the clock frequency.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.435-444
• /
• 2010

To identify and evaluate the risk factors in WMSD work, a number of ergonomic workload evaluation methods have been developed. In the legal examination of WMSD risk factors, simple observational workload evaluation methods are widely used instead of using costly measurement equipments such as EMG and motion analyzer. The simple workload evaluation methods can be categorized into three groups; risk factor checklist methods, posture observation methods, and manual material handling task evaluation methods. In terms of the categories, this survey summarized several representative workload evaluation methods and compared them each other. Then some industrial application cases referring each the workload evaluation methods were surveyed. Due to the characteristics of each method, the selection and application procedure of workload evaluation method should be appropriate for the corresponding work. Therefore, some guidelines for the selection and application procedure of workload evaluation method were suggested.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.225-230
• /
• 2008

Reactor starting method has the advantage of simplicity and closed transition in spite of lower starting torque per kVA. This method allows a smooth start with almost no observable disturbance on transition and is suitable for applications such as centrifugal pumps or fans. Reactive power doesn't contribute to work but needs to sustain the electromagnetic field required for the induction motor to operate. Starting power factor of induction motor is specially lower than running power factor. Power factor application is needed to compensate for the lower power factor of induction motor. This power factor compensation systems is occasionally being hit by the effects of the starting reactor connection position at the starting, stopping of high-voltage induction motor. This paper describes voltage and current stress affected by the installation position of power factor compensation application at the reactor starting method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.136-144
• /
• 1999

This paper deals with the fault detection problem in uncertain linear multivariable systems and its application. A robust fault detection method presented by Kim et a. (1998) for MIMO (Multi Input/Multi Output) systems has been adopted and applied to the twin rotor MIMO experimental setup using industrial DSP. The system identification problem is formulated for the twin rotor MIMO system and its parameters are estimated using experimental data. Based on the estimated parameters, some fault detection simulations are performed using the robust fault detection method, which shows that the preformance is satisfied.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.33-38
• /
• 2005

It is applied in the high quality equipment construction by introduction of this high duality treating technology (ozone treating, activated carbon treating, high quality oxidation treating, UV treating etc.)waterproofing or corrosion proof method caused secondary economy damage of operation discontinuance and high quality treating equipment for applying existent waterproofing method that corrosion proof ability (ozone resistance performance, chemical resistance etc.) and abrasion resistance performance by comprehension insufficiency of user and designer. Therefor, In this study, we will analyze problem of waterproofing and corrosion material of existing construction application by high quality treating, and measure physical performance change by various condition. It is required to waterproofing and corrosion system and application of the field valuation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.133-137
• /
• 2003

Float has been just recognized spare time for disposing of unexpected conditions as by-product of CPM(critical-path-method) calculations, in spite of important method for construction period, taking in material, human supply and cost reducation in construction process management. Also float necessary follow method of contract by ownership problem and effect construct management of use. The purpose of this study was to examine current recognition and application grade of float in construction project. In addition, the study proposes improvement strategies of float application for efficient progress plan and control.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.79-87
• /
• 2007

An effective logistics management is necessary for successful construction projects. So, prompt and precise logistics information collecting and management is needed, but there has been no systematic and effective method for this, Therefore, in this research, a standardized plan for RFID application in logistics management that could comprehend processes in building construction projects, was developed. With the 7 generalized process types that comprehend processes in construction projects, critical factors that should be considered for RFID applications were derived, and systematic and efficient application method for building projects were developed.