• 한국토양비료학회지
• /
• 제45권1호
• /
• pp.16-19
• /
• 2012

Increasing rice grain yield is critical for feeding rapid increasing of Asian population. However, global warming effect may be negative for sustainable rice production. Therefore it is essential to develop technologies not only for increasing grain yield but also for reducing global warming effect. Biochar, which is carbonized biomass, has a great potential of carbon sequestration and soil quality improvement, which can contribute grain yield increasing. In this study, rice yield responses to biochar application on the rice cropping system were evaluated with field experiments under different water management practices at the research farm of the University of Missouri-Columbia Delta Research Center, Portageville, MO. Biochar (i.e., $4Mg\;ha^{-1}$) was produced using field scale pyrolyzer and incorporated into the field 4 months prior to planting. Rice was grown under three different water management practices. Result showed that no significant yield difference was found in the biochar application plots compared to rice hull and control plots from the 2 years field study at the very fertile soil. However, rainfed management results in severe reduction of yield. Research concludes that the biochar application does not significantly influence on rice yield increasing especially for very fertile soils.

• 대한한의학회지
• /
• 제38권1호
• /
• pp.21-33
• /
• 2017

Objectives: The purpose of this study is to present the needs for New Health Technology in Korean medicine field and suggest the strategy to raise the application and selection rate. Methods: In this study, we reviewed the application status of New Health Technology application from April 27, 2007 to June 30, 2016. And we analyzed the assessment methods, procedures, and failure factors through the two Research stage technologies reports in Korean medicine field. Results: In Korean medicine field, the application status of New Health Technology is very small as 2% of the whole applications. Moreover, 62.9% of the applied technology were either an existing technology or an early technology, so did not enter the assessment process. Two technologies categorized as Research stage technology also had failed to adopt New Health Technology because they were lacking evidences or need more research to prove effectiveness. Conclusions: In order to develop New Health Technology in Korean medicine, more efforts should be made to activate research that can prove the safety and effectiveness of medical technology, and to create a quantitative or qualitative basis for the results of the research. Also, it is necessary to increase researchers' awareness of New Health Technology. And the strategy to positively utilize the "Limited Approval" to promote clinical studies.

• 한국정보처리학회논문지
• /
• 제7권5호
• /
• pp.1553-1558
• /
• 2000

The development of recent computer and communication technology has changed Automation System using communication network, and the new USB substituted with Serial Communication is already developed and now popular. In this paper, High speed data transfer system design using USB interface and communication application simulated for the situation is introduced. Base on USB, we can use additive function efficiently coped with former field device. The 'Winsock Connection USB Ternimal,' designed for hardware simulation, control the field device connected by USB, and provide the way for remote control of field device by Telnet connection through TCP/IP. That theorem can guarantee controlling direct input dta of user, and acuate function of field device using USB Packet Transmission. As a result of amy research, this communication application system identified good operation of field device with those of former field device. Another result of the experiment of hardware operation, we obtained accomplishment that the sufficient bandwidth guarantee of USB has high speed and high performance, and reduce the occupancy of system.

• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.200-207
• /
• 2001

In this paper, a new method for Partial field decomposition is developed that is based on the beamforming algorithm for the application of acoustical holography to a composite sound field generated by multiple incoherent sound sources. In the proposed method, source Positions are first predicted by MUSIC(multiple signal classification) algorithm. The composite sound fields can then be decomposed into each partial field by the beamforming. Results of both numerical simulations and experiments show that the method can find each partial field very accurately and effectively, and that it also has Potential to be used for application to distributed sources.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1426-1430
• /
• 2018

High magnetic field effects on the microstructure and magnetic properties of $BaFe_{12}O_{19}$ hexaferrites synthesized hydrothermal method have been investigated. The obtained results indicate that the lattice constant decreases gradually as the magnetic field strength increases, which may be attributed to the lattice distortion resulted from the high magnetic field. Polycrystalline $BaFe_{12}O_{19}$ samples prepared under magnetic field strength at zero and 5 T are single phase. It is found that application of external magnetic field during synthesis can induce orientated growth of the hexaferrite crystals along the easy magnetic axis. The magnetic properties can be effectively regulated by an application of high magnetic fields. It is observed that the $BaFe_{12}O_{19}$ prepared under a 5 T magnetic field exhibits a higher room-temperature saturation magnetization (66.3 emu/g) than that of the sample (43.6 emu/g) obtained without magnetic field. The results can be explained as the enhanced crystalline, improvement of $Fe^{3+}$ ions occupancy and the oriented growth induced by the external magnetic field. The growing orientation of particles gives rise to increased coercivity due to the enhancement in shape anisotropy. It is expected that an application of magnetic field during the formation of magnetic nanoparticles could be a promising technique to modify magnetic properties with excellent performance.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.616-619
• /
• 2005

CALNAL team of Korea Aerospace Research Institute(KARI) performed field campaigns for absolute radiometric calibration of 1m satellite image on Daejeon and the cal/val site of Goheung. The satellite image have spatial resolution of 1m in panchromatic spectral band of 450-900nm. The performed cal/val method is the reflectance-based of vicarious calibration methods. We collected ground-based and meteology data such as temperature, surface pressure and reflectance of targets, and radiosonde data used only to test in Goheung. Data collected on each field served as input to radiative transfer codes to generate a top-of-atmosphere(TOA) radiance estimate. Derived TOA is compared with DN of overpass satellite to calculate calibration coefficient of gain and offset.

• 방사선산업학회지
• /
• 제5권3호
• /
• pp.191-196
• /
• 2011

The economic scale of nuclear application is a good indicator to show how the radiation technology is useful and contribute to improve public welfare and living standard. Recent research in Japan shows that the economic scale of nuclear field was 4,112 B¥ for radiation application(46%) and 4,741 B¥ for nuclear energy (54%) playing a role of "two wheels of one cart" in nuclear field and the total 8,853 B¥ constitutes 1.8% of gross domestic products (GDP). The radiation application consisted of 2,295 B¥ (56%) in industry (semiconductor, sterilization, nondestructive testing, radiation processing of tires, etc.), 1,538 B¥ (37%) in medicine (therapy and diagnosis such as X-ray, nuclear medicine, computed tomography, etc.) and 279 B¥ (7%) in agriculture (mutation breeding, food irradiation, sterile insect technique, etc.). Radiation application by ${\gamma}$-ray, electron beam and ion beam is steadily increasing in Japan.

• 수산해양교육연구
• /
• 제24권3호
• /
• pp.416-423
• /
• 2012

Smartphone and Tablet PC has become a popular. So, various location-based service applications are being made in the field of advertising, games, and search. However, the location-based services application is lacking in the field of education. Therefore, this study proposes a Location-based service application for Tablet PC, which can be take advantage in school. The application was designed with these considerations in mind. First, the application to increase the participation of the students take the form of play. Second, participating students are influencing each other. Third, through the promotion of the cycle has allowed long-term operations. This application will be used usefully in an environment that students use a individual Tablet PC through the spread of e-textbooks.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.61-66
• /
• 1999

The use of multileaf collimator(MLC) to replace conventional field-shaping techniques is not in itself expected to improve the local control of malignancy. The purpose for using MLCs in conventional radiation oncology is to improve the efficiency of treatment delivery. For effective clinical application of MLCs to shaped radiation field, field outline must be translated into MLC leaf position tables. The intended leaf positions contained in these tables must then be communicated to the control computer that drives the MLC. There are currently at least three techniques utilized by manufacturers of MLCs and treatment planning systems for doing this. The Varian series use a workstation employing a manual digitizer and light box especially. It has a third level MLC configuration and also has the option of placing the wedges above or below the block tray. The C language are used for development of software and three leaf coverage have been used for positioning MLC loaves at the nominal field boundary. The fit of the leaf shape to treatment target volumes are optimized by the rotation of the direction in leaf travel. The clinical application of this software are investigated for Varian MLCs used in linear accelerator of Yonsei Cancer Center. The advantage of the results with using this software is to prescribe and calculate exposed and blocked area in MLCs field.

• 한국ITS학회 논문지
• /
• 제2권2호
• /
• pp.23-29
• /
• 2003

본 연구는 지능형 교통시스템(ITS)의 정보수집 및 제공기술 중, 통행시간 산출과 제공을 위한 요소기술인 주행차량자동인식시스템(AVI)의 현장시험 적용과 평가에 관한 실험 연구이다. 일반국도에서의 현장평가는 비접촉 방식의 차량검출과 이를 통해 얻은 자료로부터 구간 통행시간을 산출하는 방식을 제안하고, 실측데이터를 통해 현장 적용 성능을 검토하였다 본 연구는 현장 적용성능 평가 방법과 이를 통해 실측 데이터의 검지율과 인식율 그리고 통행시간을 분석하였다.