• 한국전자거래학회지
• /
• 제5권1호
• /
• pp.123-134
• /
• 2000

Over the past several decades, several architectural approaches have been applied to develop Information Systems, The software architectural model has been recognized as one of the most important methods for improving productivity. Most conceptual models are difficult to understand and interpret at various system models. As a consequence, conceptual models of many Information Systems fail to represent, exploit, and apply to various aspects, which is needed for reducing development step of the architecture. In this paper, we will explain the architectural model as the 4＋1 View of UML. This model integrates the Knowledge Management System into five views： the Logical View, the Process View, the Deployment View, Implementation View, and the Use-Case View. Moreover, this paper will not only provide information on the application of the software architectural model by stakeholders, but also ultimately improve productivity.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (1)
• /
• pp.466-468
• /
• 2000

J2EE(JavaTM 2 Platform, Enterprise Edition)의 클라이언트 애플리케이션, 웹 컴포넌트, Enterprise JavaBeans 컴포넌트와 같은 앤터프라이즈 애플리케이션은 개발된 후 컨테이너에 배치되어 실행된다. 이러한 앤터프라이즈 애플리케이션(enterprise application)은 다양한 EIS(Enterprise Information System)에 접근하여 관련된 기능과 데이터를 사용할 필요가 있다. J2EE 커넥터 아키텍처(Connector Architecture)는 J2EE 플랫폼을 다양한 EIS와 연결하기 위한 표준을 정의하는 API 이며, 각 EIS 벤더는 이러한 커넥터 아키텍처의 설계서를 따르는 EISF의 시스템 레벨 소프트웨어 드라이버인 표준 리소스 어댑터(Resource Adaptor)를 제공한다. 커넥터 아키텍처를 구현한 리소스 어댑터를 사용함으로써 특정 벤더의 J2EE 플랫폼에 종속되지 않도록 EIS를 통합할 수 있다. 본 논문에서는 이러한 J2EE 커넥터 아키텍처를 구현한 리소스 어댑터를 애플리케이션 서버를 배치하기 위하여 배치기가 수행해야 하는 배치 단계를 크게 네 단계로 구분하고, 배치구성 활동을 다섯 가지로 분류 및 정의한다,

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4453-4468
• /
• 2015

This paper investigates optimization-based base station (BS) placement. An optimization model is defined and the BS placement problem is transformed to a lexicographical stratified programming (LSP) model for a given trajectory, according to different accuracy requirements. The feasible region for BS deployment is obtained from the positioning system requirement, which is also solved with signal coverage problem in BS placement. The LSP mathematical model is formulated with the average geometric dilution of precision (GDOP) as the criterion. To achieve an optimization solution, a tolerant factor based complete stratified series approach and grid searching method are utilized to obtain the possible optimal BS placement. Because of the LSP model utilization, the proposed algorithm has wider application scenarios with different accuracy requirements over different trajectory segments. Simulation results demonstrate that the proposed algorithm has better BS placement result than existing approaches for a given trajectory.

• 품질경영학회지
• /
• 제28권2호
• /
• pp.147-160
• /
• 2000

An objective of the 100PPM Quality Renovation, which is settled as the Korea quality renovation activity as well as the form of customer-oriented management renovation climate, is strengthening an enterprise competitiveness by worldwide quality insurance. In long-term, the 21 century's quality problem would not be effective without synthetic approach from the view point of management strategy. Another method to obtain the quality ascendancy could be an strategic application of, manufacturing function. In this research, the progressive direction for an effective approach to the 100PPM Quality Renovation is examined through the interpretation of process capability index. Finally, the deployment direction of quality renovation activity is searched.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.119-120
• /
• 2006

In this paper, we suggest postal RFID adaptation model, tag data structure and code which can be used for real time trace and track of parcel processing and pallet management. This paper also shows postal RFID application system architecture and testbed based on the proposed tag data structure and code, and shows recognition performance of tag on parcel and pallet by speed and mounting tag material such as can, water, and paper using implemented postal RFID system for postal logistics. The contribution of this paper is to stimulate deployment of RFID technology for postal logistics service and SCM (Supply Chain Management).

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.76-81
• /
• 2017

In this paper, the risk analysis of smart home services was implemented by applying threat modeling. Identified possible threats for safe deployment of smart home services and identified threats through the STRIDE model. Through the creation of the Attack Tree, the attackable risk was analyzed and the risk was measured by applying the DREAD model. The derived results can be used to protect assets and mitigate risk by preventing security vulnerabilities from compromising and identifying threats from adversely affecting services. In addition, the modeled result of the derived threat can be utilized as a basis for performing the security check of the smart home service.

• 한국국방경영분석학회지
• /
• 제25권1호
• /
• pp.107-132
• /
• 1999

In this study, we are concerned with the comparative aspects of five selected methods of decision making with respect to their adequacy in helping complex decisions about real-world problems. We examine the methods in terms of outlines, procedures and advantages/disadvantages to identify similarities and differences among them with the aim of showing which method is more likely to gain greater attention both in academia and in practice. To illustrate different courses of deployment of the methods, we offer an application with a case of airport transportation project in this paper. Some discussions on AHP and other methods are presented.

• Journal of Information Processing Systems
• /
• 제13권1호
• /
• pp.26-39
• /
• 2017

The need for embedded devices to be able to exchange information with each other and with data centers is essential for the advent of the Internet of Things (IoT). Several existing communication protocols are designed for small devices including the message-queue telemetry transport (MQTT) protocol or the constrained application protocol (CoAP). However, most of the existing implementations are convenient for computers or smart phones but do not consider the strict constraints and limitations with regard resource usage, portability and configuration. In this paper, we report on an industrial research and development project which focuses on the design, implementation, testing and deployment of a MQTT module. The goal of this project is to develop this module for platforms having minimal RAM, flash code memory and processing power. This software module should be fully compliant with the MQTT protocol specification, portable, and inter-operable with other software stacks. In this paper, we present our approach based on abstraction layers to the design of the MQTT module and we discuss the compliance of the implementation with the requirements set including the MISRA static analysis requirements.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2019년도 춘계학술발표대회
• /
• pp.316-319
• /
• 2019

본 논문에서는 기존의 실시간 스트리밍 플랫폼을 분석하여 스트리밍 아키텍처를 설계하고, 다중 사용자를 수용하여 실시간 소통 및 미디어 저장을 처리한다. 나아가 배포를 위하여 안드로이드 모바일 앱을 통해 동작을 시험하고 서비스를 제공하도록 한다.

• 항공우주시스템공학회지
• /
• 제15권4호
• /
• pp.1-6
• /
• 2021

The non-explosive holding and release mechanism is used to prevent damage to the mission component caused by explosives when the deployment structure for Cube Satellites is separated. However, among the several types available, the non-explosive holding and release mechanism system using nylon wires depend on the nylon wire knot method and tightening power of the worker. Therefore, in this study, we conducted experiments with the operation of a new holding and release mechanism system by conceptualizing the Boa System Dial, which can provide a constant tightening force regardless of worker proficiency and deploying a imitational solar panel. In this study, the process of binding and unbinding with constant tension was recorded while applying the novel non-explosive holding and release mechanism using the Boa System Dial proposed. In addition, required advances are indicated for the application of the proposed system to actual Cube Satellites.